[arm-allstar] Weather Script Updates

[Doug Crompton]

What are you referring to? Saytime or wx_condition? I am not hearing
anything on saytime.pl  - It says the time, then temperature, then
condition if available.   What is the command line you are using?


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Mon, Feb 3, 2020 at 7:18 PM "KY220GROUP--- via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> Thanks for the wx_script Doug, It has made the thing I have been trying to
> figure out to do so simple now. The only thing I hear is when my
> wx_conditions header plays, the first word sounds like "and" temperature is
> 37 and so on. How can I get the "and" dropped or can I?
>
> 73
> Tim Webb - KK4WH(606)909-2094
> https://www.qrz.com/db/KK4WHwww.facebook.com/kentucky220
>
>
>     On Sunday, February 2, 2020, 2:50:07 PM EST, Doug Crompton via
> ARM-allstar <arm-allstar at hamvoip.org> wrote:
>
>  Update RPI 2-3-4 Version 1.6-08 February 2, 2020  includes the following -
>
> Updated saytime.pl to include the ability to save the sound files for
> playing by other means such as in tail messages, etc. Current usage for
> immediate voice stays the same - no third parameter.
>
> Usage: saytime.pl [<locationid>] nodenumber [1=save time and wx, 2=save wx
> - both no voice]
>
> Example:  saytime.pl 19001 1998 1  -  Save time and zip 19001 weather
> sound file to /tmp/current-time.gsm, no voice to node
>
>                 saytime.pl 19001 1998 2  - Save just zip 19001 weather
> sound file to /tmp/current-time.gsm, no voice to node
>
> Updated wx_condition.sh  to include precipitation rate/hr when available.
> Also no voice for total rain or precipitation rate if total rain is 0.
>
> Added s option for saving to file, no voice.
>
> wx_condition.sh KPHL 40000 s      << Just save output to
> /tmp/wx_condition.gsm
>
> wx_condition.sh w-kparichb3 1998 s
>
> Weather sound data saved to /tmp/current_wx.gsm
>
> To use either of these and be current you would call either saytime.pl or
> wx_condition.sh with the file save option BEFORE using the /tmp sound
> files. This could be done in  a script or cron depending on how you are
> using the sound files. You would then use the gsm files WITHOUT the .gsm
> anywhere that Hamvoip uses sound files.
>
> Type just saytime.pl or wx_condition.sh to see full parameter examples.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org