[arm-allstar] Morse Code ID Seems Stuck at 20 WPM

[Adam MacLeod]

Well, the FCC doesn't govern the entire world, but thanks for the answer anyhow.


On 8/16/20, "David H. via ARM-allstar" <arm-allstar at hamvoip.org> wrote:
> 20 wpm is the maximum speed an ID can be sent at per FCC regulations.
>
> On August 16, 2020 4:46:49 PM CDT, "Adam MacLeod via ARM-allstar"
> <arm-allstar at hamvoip.org> wrote:
>>Hello All,
>>I am looking to speed up the morse code ID on my HamVoIP Allstar Node.
>>However, when I increase the speed parameter beyond 20 in rpt.conf in
>>the [morse51986] stanza, it does not seem to have any audible effect.
>>Does anyone have any suggestions on how to speed up the morse ID
>>beyond its painfully slow speed? When telemetry fires, it slows me
>>down from keying up, as this is a simplex node.
>>
>>Thanks.
>>Adam, VA3AUM, Node 51986
>>_______________________________________________
>>
>>ARM-allstar mailing list
>>ARM-allstar at hamvoip.org
>>http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>>Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>
> --
> Sent from my LG Stylo 5 via the T-mobile network.
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>


-- 

Best Regards,
Adam MacLeod