[arm-allstar] Temporary wiring of DR1X

[kg5rdf]

Mike,If your follow the attached link and under comments, is a wiring diagram that may help you. It may just be better to just use the Allstar as the controller.https://www.facebook.com/106362637842437/posts/106576467821054/David KG5RDF
-------- Original message --------From: Mike Sullivan via ARM-allstar <arm-allstar at hamvoip.org> Date: 8/11/20  7:30 PM  (GMT-06:00) To: ARM Allstar <arm-allstar at hamvoip.org> Cc: Mike Sullivan <kn4imu at gmail.com> Subject: [arm-allstar] Temporary wiring of DR1X Long story short, storm a couple weeks ago killed the club’s RC210. It’ssent off for repairs (no, skipping it entirely isn’t an option) but I’mwanting to wire the Allstar node as a temporary controller (or at least foraudio passing) as we have a net 5 nights a week linked up which we cant dobecause of the nodes absence.The repeater is a Yaesu DR1X, using an Arcom ADR/TS64 setup, and the nodeuses a RIM-Lite wired for the RC210. I did try to wire up a plug tobasically cross-wire and connect them up but Simpleusb showed everythingflashing from clear to active and not working properly. Not sure if I wiredsomething wrong.Seeing if anyone has done this particular set up before and if theressomething I’m missing. Its meant to be temporary until the controller comesback.Mike_______________________________________________ARM-allstar mailing listARM-allstar at hamvoip.orghttp://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstarVisit the BBB and RPi2/3/4 web page - http://hamvoip.org