[arm-allstar] Fan Control

[Ron Gilson]

The script you wrote 10/2018.  I copied and paste hopefully not making any
goofs ?  If this is not practical I can use a thermostat on the heat sink?
Thanks for all your help.  Ron


On Mon, Apr 27, 2020 at 9:22 PM "Doug Crompton via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> Ron,
>
>   What info are you using for this? What script?
>
> *73 Doug, WA3DSP*
> *http://wa3dsp.org <http://wa3dsp.org>*
>
>
> On Mon, Apr 27, 2020 at 8:14 PM "Ron Gilson via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > Recently I built a suitcase repeater.  Since this is a battery operated
> > repeater and power is limited, I decided to use the fan script.  After
> > adding the fan_control.sh in the /etc/asterisk/local and adding
> > local/fan_control.sh to rc.local along with the 3 lines to events I did a
> > reboot but pin 33 bit 23 does not change after a ptt???  Have I missed
> > something ?  Thanks
> > Ron  WA2WWK
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> >
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>