[arm-allstar] WeeWx interfacing

[Doug Crompton]

Kevin,

 Both of the weather scripts in Hamvoip can accept weather from
wunderground. If your station send data there you can display it. Here is
one of my stations -

wx_condition.sh w-kparichb3 40000 v

Weather for Station ID - KPARICHB3
"2020-04-24 18:08:09"
-----------------------------------
Temperature - 48 F / 9 C
Humidity - 91 Percent
Wind Direction - NW at 0 miles per hour
Wind Gusts - 0 miles per hour
Barometric Pressure - 29.74 inches
Dew point - 45 F / 7 C
Precipitation Today - 0.63 inches
Precipitation Rate - 0 inches/Hr
Wind Chill - 48 F / 9 C
Heat Index - 48 F / 9 C
Solar Radiation - 11
UV - 1

just type wx_condition.sh or weather.sh to see the formats.

*73 Doug, WA3DSP*
*http://wa3dsp.org <http://wa3dsp.org>*

On Fri, Apr 24, 2020 at 5:20 PM "Kevin Davis via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> By chance, has anyone done in interfacing of their AllStar need with an
> installation of WeeWx?
>
> I am currently using the saytime.pl to announce time and weather on my
> local, radioless node, but I would like to be pulling the data from my
> local weather station instead of NWS.  My plan is to export a JSON file to
> my NAS that the Allstar node would then pull down and use within the
> saytime.pl script.
>
> Just wanted to ask if anyone else had tackled this before rolling my own.
>
> Thanks.
>
> -KE7K
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>