[arm-allstar] ARM-allstar Digest, Vol 71, Issue 49

Wed Apr 22 17:36:31 EDT 2020

Vince,

   Since both lsnodes and supermon are web applications they should work
the same. If you can get in on lsnodes then you have a path to supermon.
Instead of  /cgi-bin/lsnodes_web you would just do /supermon   - you will
need to login to supermon and then have all the keys.

There is no direct shutdown in supermon but there is a DTMF key and you can
put the node in and do whatever you want in the data block such a *B0 *A1
etc and select the DTMF key and it will execute.

You can access lsnodes from supermon but the lsnodes command mode is gone.
lsnodes is useful to see all the nodes connected because supermon will only
show you directly connected nodes. So they work together.

*73 Doug, WA3DSP*
*http://wa3dsp.org <http://wa3dsp.org>*

On Wed, Apr 22, 2020 at 4:52 PM "Comcast - WA3ADI via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> Since I rely on lsnodes for various functions to control my nodes, I have
> a few questions.
>
> 1. Because I use nodes in mobile and portable locations on different wifi
> connections, will I now have to change Supermon everytime I move to a
> different hot spot?
>
> 2. Will Supermon even work when I move to different hotspots?
>
> 3. Is there a shutdown command in Supermon?
>
> 4. What other changes will I have to make to administer all of my nodes
> from Supermon?
>
> 5. It appears that the lsnodes commands in Supermon will no longer work
> either. Is this true?
>
> Thanks for any comments.
>
> 73, Vince
> WA3ADI
>
> From: arm-allstar-request at hamvoip.org
> Sent: Wednesday, April 22, 2020 3:07 PM
> To: arm-allstar at hamvoip.org
> Subject: ARM-allstar Digest, Vol 71, Issue 49
>
> Send ARM-allstar mailing list submissions to
>         arm-allstar at hamvoip.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
>         http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> or, via email, send a message with subject or body 'help' to
>         arm-allstar-request at hamvoip.org
>
> You can reach the person managing the list at
>         arm-allstar-owner at hamvoip.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of ARM-allstar digest..."
>
>
> Today's Topics:
>
>    1. Re: Hamvoip Update 1.6.2-03 (wb6hro at att.net)
>    2. Re: Hamvoip Update 1.6.2-03 (David McGough)
>    3. Re: Hamvoip Update 1.6.2-03 (Doug Crompton)
>    4. Re: Hamvoip Update 1.6.2-03 (wb6hro at att.net)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Wed, 22 Apr 2020 08:43:33 -0700
> From: <wb6hro at att.net>
> To: "'ARM Allstar'" <arm-allstar at hamvoip.org>
> Subject: Re: [arm-allstar] Hamvoip Update 1.6.2-03
> Message-ID: <037801d618bc$c81620e0$584262a0$@att.net>
> Content-Type: text/plain;       charset="us-ascii"
>
> Doug,
>
> I just did the update at my hub at my house and for some reason I can no
> longer communicate via SSH with Putty or Supermon.
>
> I can still connect to it from other nodes.
>
> The IP address and SSH port were verified using HDMI Port, they are correct
> in setup and in Putty.
>
> What am I missing? I hope I don't have to fall on my scope probe! LOL
>
>
> Joe Orrico
> WB6HRO / WR6AAC Repeater
>
>
>
> -----Original Message-----
> From: ARM-allstar <arm-allstar-bounces at hamvoip.org> On Behalf Of "Doug
> Crompton via ARM-allstar"
> Sent: Tuesday, April 21, 2020 10:25 PM
> To: ARM Allstar <arm-allstar at hamvoip.org>
> Cc: Doug Crompton <wa3dsp at gmail.com>
> Subject: [arm-allstar] Hamvoip Update 1.6.2-03
>
> Dave has put out an update tonight for Supermon, Lsnodes, the events
> system,
> and some other internal fixes and code clean up.
>
> Supermon 6.2 adds a few new features and some visual cleanup. The updated
> manual is in the howto's at hamvoip.org
>
> See the 6.2 addendum at the end of the document. We are working on some
> efficiency improvements on the AMI code which Supermon uses heavily. On
> larger hubs with multiple Supermon users the amount of CPU resources it
> uses
> is significant. Internally the AMI was not designed for this amount of
> loading so this update lays the groundwork for the AMI update. A
> forthcoming
> update will complete that change. Supermon 6.2 gives you the ability to
> change the update speed of the display which by default is .5 seconds. It
> can now be set to as long as 5 seconds if desire to reduce the loading when
> multiple users are accessing it.
>
> Another significant Supermon change is the adding of a second level of
> security. If setup certain buttons are only available to what we would call
> a super admin. So presently there are three possible levels - no login sees
> the connected nodes and their status, Level two see only buttons that would
> not directly cause system disruption if used inappropriately. Level three
> see all the button. If level three is not setup which is the default
> behavior then level two see all the buttons. This is explained in the
> addendum. You are basically setting up another user/pass in the edit
> directory.
>
> lsnodes has changed due to security issues! The frequency of Internet
> hacking has increased immensely in the last few months and we are always
> looking at ways to improve the security of the Hamvoip code. Unfortunately
> the command part of lsnodes is not secure therefore we have taken the
> command mode out of lsnodes. Users should use supermon for command
> operation. Supermon is part of ALL Hamvoip installations and is easy to
> setup. Instructions are in the manual mentioned above. lsnodes links are in
> Supermon.
>
> An exciting change has been made to the events format allowing global
> variables to be assigned and used externally. This adds the 'S' set
> parameter to the event command. Here is an example -
>
> [events69000]
> LINKS0 = G|S|${RPT_NUMALINKS}
>
> In this example we are setting a global variable (LINKS0) to the value of
> the number of direct links connected to node 69000. The G means perform the
> event on a global, in this case LINKS0, and the S means set it to the value
> of RPT_NUMALINKS. Events change automatically at every connect/disconnect
> operation or system event change.
>
> This completely eliminates the need to have an external script do this.
> This global variable can then be used in the extensions.conf file or
> elsewhere.
>
> Internally thread naming has been added to aid in debugging.
>
> Use the admin menu item 1 to update your node. It is important do do
> updates
> on a timely basis as code changes add features and enhancements you will
> not
> have it you do not update. The complete name of this version is Asterisk
> 1.4.23-pre.hamvoip-V1.6.2-03-app_rpt-0.327-04/16/2020
>
> The next update is scheduled to include an updated ssh and firewall example
> code to protect ssh ports.
>
>
> *73 Doug, WA3DSP*
> *http://wa3dsp.org <http://wa3dsp.org>*
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>
>
>
> ------------------------------
>
> Message: 2
> Date: Wed, 22 Apr 2020 12:33:22 -0400 (EDT)
> From: David McGough <kb4fxc at inttek.net>
> To: "\"Joe Orrico via ARM-allstar\"" <arm-allstar at hamvoip.org>
> Subject: Re: [arm-allstar] Hamvoip Update 1.6.2-03
> Message-ID:
>         <Pine.LNX.4.44.2004221223410.32394-100000 at goliath.inttek.net>
> Content-Type: TEXT/PLAIN; charset=US-ASCII
>
>
> Hi Joe,
>
> Nothing related to networking or ssh got updated recently. Last night's
> update included new supermon, lsnodes, the AllStar/asterisk code and
> updated the release notes.
>
> Using a monitor/keyboard directly connected, can you confirm that the ssh
> server is running?  Go to a bash shell prompt (admin menu option #9) and
> run:
>
> systemctl status sshd
>
>
> ....Does this command show that the ssh server is running?
>
>
> 73, David KB4FXC
>
>
> On Wed, 22 Apr 2020, "Joe Orrico via ARM-allstar" wrote:
>
> > Doug,
> >
> > I just did the update at my hub at my house and for some reason I can no
> > longer communicate via SSH with Putty or Supermon.
> >
> > I can still connect to it from other nodes.
> >
> > The IP address and SSH port were verified using HDMI Port, they are
> correct
> > in setup and in Putty.
> >
> > What am I missing? I hope I don't have to fall on my scope probe! LOL
> >
> >
> > Joe Orrico
> > WB6HRO / WR6AAC Repeater
> >
> >
> >
> > -----Original Message-----
> > From: ARM-allstar <arm-allstar-bounces at hamvoip.org> On Behalf Of "Doug
> > Crompton via ARM-allstar"
> > Sent: Tuesday, April 21, 2020 10:25 PM
> > To: ARM Allstar <arm-allstar at hamvoip.org>
> > Cc: Doug Crompton <wa3dsp at gmail.com>
> > Subject: [arm-allstar] Hamvoip Update 1.6.2-03
> >
> > Dave has put out an update tonight for Supermon, Lsnodes, the events
> system,
> > and some other internal fixes and code clean up.
> >
> > Supermon 6.2 adds a few new features and some visual cleanup. The updated
> > manual is in the howto's at hamvoip.org
> >
> > See the 6.2 addendum at the end of the document. We are working on some
> > efficiency improvements on the AMI code which Supermon uses heavily. On
> > larger hubs with multiple Supermon users the amount of CPU resources it
> uses
> > is significant. Internally the AMI was not designed for this amount of
> > loading so this update lays the groundwork for the AMI update. A
> forthcoming
> > update will complete that change. Supermon 6.2 gives you the ability to
> > change the update speed of the display which by default is .5 seconds. It
> > can now be set to as long as 5 seconds if desire to reduce the loading
> when
> > multiple users are accessing it.
> >
> > Another significant Supermon change is the adding of a second level of
> > security. If setup certain buttons are only available to what we would
> call
> > a super admin. So presently there are three possible levels - no login
> sees
> > the connected nodes and their status, Level two see only buttons that
> would
> > not directly cause system disruption if used inappropriately. Level three
> > see all the button. If level three is not setup which is the default
> > behavior then level two see all the buttons. This is explained in the
> > addendum. You are basically setting up another user/pass in the edit
> > directory.
> >
> > lsnodes has changed due to security issues! The frequency of Internet
> > hacking has increased immensely in the last few months and we are always
> > looking at ways to improve the security of the Hamvoip code.
> Unfortunately
> > the command part of lsnodes is not secure therefore we have taken the
> > command mode out of lsnodes. Users should use supermon for command
> > operation. Supermon is part of ALL Hamvoip installations and is easy to
> > setup. Instructions are in the manual mentioned above. lsnodes links are
> in
> > Supermon.
> >
> > An exciting change has been made to the events format allowing global
> > variables to be assigned and used externally. This adds the 'S' set
> > parameter to the event command. Here is an example -
> >
> > [events69000]
> > LINKS0 = G|S|${RPT_NUMALINKS}
> >
> > In this example we are setting a global variable (LINKS0) to the value of
> > the number of direct links connected to node 69000. The G means perform
> the
> > event on a global, in this case LINKS0, and the S means set it to the
> value
> > of RPT_NUMALINKS. Events change automatically at every connect/disconnect
> > operation or system event change.
> >
> > This completely eliminates the need to have an external script do this.
> > This global variable can then be used in the extensions.conf file or
> > elsewhere.
> >
> > Internally thread naming has been added to aid in debugging.
> >
> > Use the admin menu item 1 to update your node. It is important do do
> updates
> > on a timely basis as code changes add features and enhancements you will
> not
> > have it you do not update. The complete name of this version is Asterisk
> > 1.4.23-pre.hamvoip-V1.6.2-03-app_rpt-0.327-04/16/2020
> >
> > The next update is scheduled to include an updated ssh and firewall
> example
> > code to protect ssh ports.
> >
> >
> > *73 Doug, WA3DSP*
> > *http://wa3dsp.org <http://wa3dsp.org>*
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> >
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> >
>
>
>
> ------------------------------
>
> Message: 3
> Date: Wed, 22 Apr 2020 14:04:47 -0400
> From: Doug Crompton <wa3dsp at gmail.com>
> To: ARM Allstar <arm-allstar at hamvoip.org>
> Subject: Re: [arm-allstar] Hamvoip Update 1.6.2-03
> Message-ID:
>         <
> CAMp6vst35ESBqhGK3cFeLK-pe4Xm_qcCsB0pT0_A6EG9McGd2A at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> Joe,
>
>  ssh and Supermon are two different communications ports so one would not
> have anything to do with the other. Can you ping the IP address of this
> server on your LAN? Is this a static or DHCP server?  Is it wired or
> wireless?  If you have HDMI access you can try pinging out. Also do
> ifconfig at the Linux prompt and see what your network settings are. If you
> are using DHCP wired and wireless will have different IP addresses.
>
> *73 Doug, WA3DSP*
> *http://wa3dsp.org <http://wa3dsp.org>*
>
> On Wed, Apr 22, 2020 at 12:17 PM "Joe Orrico via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > Doug,
> >
> > I just did the update at my hub at my house and for some reason I can no
> > longer communicate via SSH with Putty or Supermon.
> >
> > I can still connect to it from other nodes.
> >
> > The IP address and SSH port were verified using HDMI Port, they are
> correct
> > in setup and in Putty.
> >
> > What am I missing? I hope I don't have to fall on my scope probe! LOL
> >
> >
> > Joe Orrico
> > WB6HRO / WR6AAC Repeater
> >
> >
> >
> > -----Original Message-----
> > From: ARM-allstar <arm-allstar-bounces at hamvoip.org> On Behalf Of "Doug
> > Crompton via ARM-allstar"
> > Sent: Tuesday, April 21, 2020 10:25 PM
> > To: ARM Allstar <arm-allstar at hamvoip.org>
> > Cc: Doug Crompton <wa3dsp at gmail.com>
> > Subject: [arm-allstar] Hamvoip Update 1.6.2-03
> >
> > Dave has put out an update tonight for Supermon, Lsnodes, the events
> > system,
> > and some other internal fixes and code clean up.
> >
> > Supermon 6.2 adds a few new features and some visual cleanup. The updated
> > manual is in the howto's at hamvoip.org
> >
> > See the 6.2 addendum at the end of the document. We are working on some
> > efficiency improvements on the AMI code which Supermon uses heavily. On
> > larger hubs with multiple Supermon users the amount of CPU resources it
> > uses
> > is significant. Internally the AMI was not designed for this amount of
> > loading so this update lays the groundwork for the AMI update. A
> > forthcoming
> > update will complete that change. Supermon 6.2 gives you the ability to
> > change the update speed of the display which by default is .5 seconds. It
> > can now be set to as long as 5 seconds if desire to reduce the loading
> when
> > multiple users are accessing it.
> >
> > Another significant Supermon change is the adding of a second level of
> > security. If setup certain buttons are only available to what we would
> call
> > a super admin. So presently there are three possible levels - no login
> sees
> > the connected nodes and their status, Level two see only buttons that
> would
> > not directly cause system disruption if used inappropriately. Level three
> > see all the button. If level three is not setup which is the default
> > behavior then level two see all the buttons. This is explained in the
> > addendum. You are basically setting up another user/pass in the edit
> > directory.
> >
> > lsnodes has changed due to security issues! The frequency of Internet
> > hacking has increased immensely in the last few months and we are always
> > looking at ways to improve the security of the Hamvoip code.
> Unfortunately
> > the command part of lsnodes is not secure therefore we have taken the
> > command mode out of lsnodes. Users should use supermon for command
> > operation. Supermon is part of ALL Hamvoip installations and is easy to
> > setup. Instructions are in the manual mentioned above. lsnodes links are
> in
> > Supermon.
> >
> > An exciting change has been made to the events format allowing global
> > variables to be assigned and used externally. This adds the 'S' set
> > parameter to the event command. Here is an example -
> >
> > [events69000]
> > LINKS0 = G|S|${RPT_NUMALINKS}
> >
> > In this example we are setting a global variable (LINKS0) to the value of
> > the number of direct links connected to node 69000. The G means perform
> the
> > event on a global, in this case LINKS0, and the S means set it to the
> value
> > of RPT_NUMALINKS. Events change automatically at every connect/disconnect
> > operation or system event change.
> >
> > This completely eliminates the need to have an external script do this.
> > This global variable can then be used in the extensions.conf file or
> > elsewhere.
> >
> > Internally thread naming has been added to aid in debugging.
> >
> > Use the admin menu item 1 to update your node. It is important do do
> > updates
> > on a timely basis as code changes add features and enhancements you will
> > not
> > have it you do not update. The complete name of this version is Asterisk
> > 1.4.23-pre.hamvoip-V1.6.2-03-app_rpt-0.327-04/16/2020
> >
> > The next update is scheduled to include an updated ssh and firewall
> example
> > code to protect ssh ports.
> >
> >
> > *73 Doug, WA3DSP*
> > *http://wa3dsp.org <http://wa3dsp.org>*
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> >
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> >
>
>
> ------------------------------
>
> Message: 4
> Date: Wed, 22 Apr 2020 11:21:13 -0700
> From: <wb6hro at att.net>
> To: "'ARM Allstar'" <arm-allstar at hamvoip.org>
> Subject: Re: [arm-allstar] Hamvoip Update 1.6.2-03
> Message-ID: <056301d618d2$cf0ec9e0$6d2c5da0$@att.net>
> Content-Type: text/plain;       charset="utf-8"
>
> Doug,
>
> I've been emailing with David about it. It's a wired connection and IP is
> good and shows up on network. Actually it connects with my other nodes fine
> also.
>
> I just can't communicate locally on the network anymore. The IP is correct
> in setup and SSH port is good too. I can communicate with Putty and
> Supermon to my other nodes fine.
>
> I just sent David the node number that is 500290. It's connected to other
> nodes.
>
> The only way locally is the HDMI and keyboard. No SSH or HTTP.
>
> It's always something. ?
>
>
> Joe Orrico
> WB6HRO / WR6AAC Repeater
>
>
>
> -----Original Message-----
> From: ARM-allstar <arm-allstar-bounces at hamvoip.org> On Behalf Of "Doug
> Crompton via ARM-allstar"
> Sent: Wednesday, April 22, 2020 11:05 AM
> To: ARM Allstar <arm-allstar at hamvoip.org>
> Cc: Doug Crompton <wa3dsp at gmail.com>
> Subject: Re: [arm-allstar] Hamvoip Update 1.6.2-03
>
> Joe,
>
>  ssh and Supermon are two different communications ports so one would not
> have anything to do with the other. Can you ping the IP address of this
> server on your LAN? Is this a static or DHCP server?  Is it wired or
> wireless?  If you have HDMI access you can try pinging out. Also do
> ifconfig at the Linux prompt and see what your network settings are. If you
> are using DHCP wired and wireless will have different IP addresses.
>
> *73 Doug, WA3DSP*
> *http://wa3dsp.org <http://wa3dsp.org>*
>
> On Wed, Apr 22, 2020 at 12:17 PM "Joe Orrico via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > Doug,
> >
> > I just did the update at my hub at my house and for some reason I can
> > no longer communicate via SSH with Putty or Supermon.
> >
> > I can still connect to it from other nodes.
> >
> > The IP address and SSH port were verified using HDMI Port, they are
> > correct in setup and in Putty.
> >
> > What am I missing? I hope I don't have to fall on my scope probe! LOL
> >
> >
> > Joe Orrico
> > WB6HRO / WR6AAC Repeater
> >
> >
> >
> > -----Original Message-----
> > From: ARM-allstar <arm-allstar-bounces at hamvoip.org> On Behalf Of "Doug
> > Crompton via ARM-allstar"
> > Sent: Tuesday, April 21, 2020 10:25 PM
> > To: ARM Allstar <arm-allstar at hamvoip.org>
> > Cc: Doug Crompton <wa3dsp at gmail.com>
> > Subject: [arm-allstar] Hamvoip Update 1.6.2-03
> >
> > Dave has put out an update tonight for Supermon, Lsnodes, the events
> > system, and some other internal fixes and code clean up.
> >
> > Supermon 6.2 adds a few new features and some visual cleanup. The
> > updated manual is in the howto's at hamvoip.org
> >
> > See the 6.2 addendum at the end of the document. We are working on
> > some efficiency improvements on the AMI code which Supermon uses
> > heavily. On larger hubs with multiple Supermon users the amount of CPU
> > resources it uses is significant. Internally the AMI was not designed
> > for this amount of loading so this update lays the groundwork for the
> > AMI update. A forthcoming update will complete that change. Supermon
> > 6.2 gives you the ability to change the update speed of the display
> > which by default is .5 seconds. It can now be set to as long as 5
> > seconds if desire to reduce the loading when multiple users are
> > accessing it.
> >
> > Another significant Supermon change is the adding of a second level of
> > security. If setup certain buttons are only available to what we would
> > call a super admin. So presently there are three possible levels - no
> > login sees the connected nodes and their status, Level two see only
> > buttons that would not directly cause system disruption if used
> > inappropriately. Level three see all the button. If level three is not
> > setup which is the default behavior then level two see all the
> > buttons. This is explained in the addendum. You are basically setting
> > up another user/pass in the edit directory.
> >
> > lsnodes has changed due to security issues! The frequency of Internet
> > hacking has increased immensely in the last few months and we are
> > always looking at ways to improve the security of the Hamvoip code.
> > Unfortunately the command part of lsnodes is not secure therefore we
> > have taken the command mode out of lsnodes. Users should use supermon
> > for command operation. Supermon is part of ALL Hamvoip installations
> > and is easy to setup. Instructions are in the manual mentioned above.
> > lsnodes links are in Supermon.
> >
> > An exciting change has been made to the events format allowing global
> > variables to be assigned and used externally. This adds the 'S' set
> > parameter to the event command. Here is an example -
> >
> > [events69000]
> > LINKS0 = G|S|${RPT_NUMALINKS}
> >
> > In this example we are setting a global variable (LINKS0) to the value
> > of the number of direct links connected to node 69000. The G means
> > perform the event on a global, in this case LINKS0, and the S means
> > set it to the value of RPT_NUMALINKS. Events change automatically at
> > every connect/disconnect operation or system event change.
> >
> > This completely eliminates the need to have an external script do this.
> > This global variable can then be used in the extensions.conf file or
> > elsewhere.
> >
> > Internally thread naming has been added to aid in debugging.
> >
> > Use the admin menu item 1 to update your node. It is important do do
> > updates on a timely basis as code changes add features and
> > enhancements you will not have it you do not update. The complete name
> > of this version is Asterisk
> > 1.4.23-pre.hamvoip-V1.6.2-03-app_rpt-0.327-04/16/2020
> >
> > The next update is scheduled to include an updated ssh and firewall
> > example code to protect ssh ports.
> >
> >
> > *73 Doug, WA3DSP*
> > *http://wa3dsp.org <http://wa3dsp.org>*
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> >
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> >
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>
>
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
>
> ------------------------------
>
> End of ARM-allstar Digest, Vol 71, Issue 49
> *******************************************
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>