[arm-allstar] Hamvoip Update 1.6.2-03

Wed Apr 22 15:27:16 EDT 2020

What is the command to ping out?

Joe Orrico
Sent from my iPhone

> On Apr 22, 2020, at 12:15, Doug Crompton via ARM-allstar <arm-allstar at hamvoip.org> wrote:
> 
> Can you communicate OUT using ssh to some other system via HDMI? Can you
> ping out?
> 
> *73 Doug, WA3DSP*
> *http://wa3dsp.org <http://wa3dsp.org>*
> 
> 
>> On Wed, Apr 22, 2020 at 3:07 PM "Joe Orrico via ARM-allstar" <
>> arm-allstar at hamvoip.org> wrote:
>> 
>> Doug,
>> 
>> I've been emailing with David about it. It's a wired connection and IP is
>> good and shows up on network. Actually it connects with my other nodes fine
>> also.
>> 
>> I just can't communicate locally on the network anymore. The IP is correct
>> in setup and SSH port is good too. I can communicate with Putty and
>> Supermon to my other nodes fine.
>> 
>> I just sent David the node number that is 500290. It's connected to other
>> nodes.
>> 
>> The only way locally is the HDMI and keyboard. No SSH or HTTP.
>> 
>> It's always something. ☹
>> 
>> 
>> Joe Orrico
>> WB6HRO / WR6AAC Repeater
>> 
>> 
>> 
>> -----Original Message-----
>> From: ARM-allstar <arm-allstar-bounces at hamvoip.org> On Behalf Of "Doug
>> Crompton via ARM-allstar"
>> Sent: Wednesday, April 22, 2020 11:05 AM
>> To: ARM Allstar <arm-allstar at hamvoip.org>
>> Cc: Doug Crompton <wa3dsp at gmail.com>
>> Subject: Re: [arm-allstar] Hamvoip Update 1.6.2-03
>> 
>> Joe,
>> 
>> ssh and Supermon are two different communications ports so one would not
>> have anything to do with the other. Can you ping the IP address of this
>> server on your LAN? Is this a static or DHCP server?  Is it wired or
>> wireless?  If you have HDMI access you can try pinging out. Also do
>> ifconfig at the Linux prompt and see what your network settings are. If you
>> are using DHCP wired and wireless will have different IP addresses.
>> 
>> *73 Doug, WA3DSP*
>> *http://wa3dsp.org <http://wa3dsp.org>*
>> 
>> On Wed, Apr 22, 2020 at 12:17 PM "Joe Orrico via ARM-allstar" <
>> arm-allstar at hamvoip.org> wrote:
>> 
>>> Doug,
>>> 
>>> I just did the update at my hub at my house and for some reason I can
>>> no longer communicate via SSH with Putty or Supermon.
>>> 
>>> I can still connect to it from other nodes.
>>> 
>>> The IP address and SSH port were verified using HDMI Port, they are
>>> correct in setup and in Putty.
>>> 
>>> What am I missing? I hope I don't have to fall on my scope probe! LOL
>>> 
>>> 
>>> Joe Orrico
>>> WB6HRO / WR6AAC Repeater
>>> 
>>> 
>>> 
>>> -----Original Message-----
>>> From: ARM-allstar <arm-allstar-bounces at hamvoip.org> On Behalf Of "Doug
>>> Crompton via ARM-allstar"
>>> Sent: Tuesday, April 21, 2020 10:25 PM
>>> To: ARM Allstar <arm-allstar at hamvoip.org>
>>> Cc: Doug Crompton <wa3dsp at gmail.com>
>>> Subject: [arm-allstar] Hamvoip Update 1.6.2-03
>>> 
>>> Dave has put out an update tonight for Supermon, Lsnodes, the events
>>> system, and some other internal fixes and code clean up.
>>> 
>>> Supermon 6.2 adds a few new features and some visual cleanup. The
>>> updated manual is in the howto's at hamvoip.org
>>> 
>>> See the 6.2 addendum at the end of the document. We are working on
>>> some efficiency improvements on the AMI code which Supermon uses
>>> heavily. On larger hubs with multiple Supermon users the amount of CPU
>>> resources it uses is significant. Internally the AMI was not designed
>>> for this amount of loading so this update lays the groundwork for the
>>> AMI update. A forthcoming update will complete that change. Supermon
>>> 6.2 gives you the ability to change the update speed of the display
>>> which by default is .5 seconds. It can now be set to as long as 5
>>> seconds if desire to reduce the loading when multiple users are
>>> accessing it.
>>> 
>>> Another significant Supermon change is the adding of a second level of
>>> security. If setup certain buttons are only available to what we would
>>> call a super admin. So presently there are three possible levels - no
>>> login sees the connected nodes and their status, Level two see only
>>> buttons that would not directly cause system disruption if used
>>> inappropriately. Level three see all the button. If level three is not
>>> setup which is the default behavior then level two see all the
>>> buttons. This is explained in the addendum. You are basically setting
>>> up another user/pass in the edit directory.
>>> 
>>> lsnodes has changed due to security issues! The frequency of Internet
>>> hacking has increased immensely in the last few months and we are
>>> always looking at ways to improve the security of the Hamvoip code.
>>> Unfortunately the command part of lsnodes is not secure therefore we
>>> have taken the command mode out of lsnodes. Users should use supermon
>>> for command operation. Supermon is part of ALL Hamvoip installations
>>> and is easy to setup. Instructions are in the manual mentioned above.
>>> lsnodes links are in Supermon.
>>> 
>>> An exciting change has been made to the events format allowing global
>>> variables to be assigned and used externally. This adds the 'S' set
>>> parameter to the event command. Here is an example -
>>> 
>>> [events69000]
>>> LINKS0 = G|S|${RPT_NUMALINKS}
>>> 
>>> In this example we are setting a global variable (LINKS0) to the value
>>> of the number of direct links connected to node 69000. The G means
>>> perform the event on a global, in this case LINKS0, and the S means
>>> set it to the value of RPT_NUMALINKS. Events change automatically at
>>> every connect/disconnect operation or system event change.
>>> 
>>> This completely eliminates the need to have an external script do this.
>>> This global variable can then be used in the extensions.conf file or
>>> elsewhere.
>>> 
>>> Internally thread naming has been added to aid in debugging.
>>> 
>>> Use the admin menu item 1 to update your node. It is important do do
>>> updates on a timely basis as code changes add features and
>>> enhancements you will not have it you do not update. The complete name
>>> of this version is Asterisk
>>> 1.4.23-pre.hamvoip-V1.6.2-03-app_rpt-0.327-04/16/2020
>>> 
>>> The next update is scheduled to include an updated ssh and firewall
>>> example code to protect ssh ports.
>>> 
>>> 
>>> *73 Doug, WA3DSP*
>>> *http://wa3dsp.org <http://wa3dsp.org>*
>>> _______________________________________________
>>> 
>>> ARM-allstar mailing list
>>> ARM-allstar at hamvoip.org
>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>> 
>>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>>> 
>>> _______________________________________________
>>> 
>>> ARM-allstar mailing list
>>> ARM-allstar at hamvoip.org
>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>> 
>>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>>> 
>> _______________________________________________
>> 
>> ARM-allstar mailing list
>> ARM-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>> 
>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>> 
>> _______________________________________________
>> 
>> ARM-allstar mailing list
>> ARM-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>> 
>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org