[arm-allstar] Hamvoip Update 1.6.2-03

[Doug Crompton]

Joe,

 ssh and Supermon are two different communications ports so one would not
have anything to do with the other. Can you ping the IP address of this
server on your LAN? Is this a static or DHCP server?  Is it wired or
wireless?  If you have HDMI access you can try pinging out. Also do
ifconfig at the Linux prompt and see what your network settings are. If you
are using DHCP wired and wireless will have different IP addresses.

*73 Doug, WA3DSP*
*http://wa3dsp.org <http://wa3dsp.org>*

On Wed, Apr 22, 2020 at 12:17 PM "Joe Orrico via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> Doug,
>
> I just did the update at my hub at my house and for some reason I can no
> longer communicate via SSH with Putty or Supermon.
>
> I can still connect to it from other nodes.
>
> The IP address and SSH port were verified using HDMI Port, they are correct
> in setup and in Putty.
>
> What am I missing? I hope I don't have to fall on my scope probe! LOL
>
>
> Joe Orrico
> WB6HRO / WR6AAC Repeater
>
>
>
> -----Original Message-----
> From: ARM-allstar <arm-allstar-bounces at hamvoip.org> On Behalf Of "Doug
> Crompton via ARM-allstar"
> Sent: Tuesday, April 21, 2020 10:25 PM
> To: ARM Allstar <arm-allstar at hamvoip.org>
> Cc: Doug Crompton <wa3dsp at gmail.com>
> Subject: [arm-allstar] Hamvoip Update 1.6.2-03
>
> Dave has put out an update tonight for Supermon, Lsnodes, the events
> system,
> and some other internal fixes and code clean up.
>
> Supermon 6.2 adds a few new features and some visual cleanup. The updated
> manual is in the howto's at hamvoip.org
>
> See the 6.2 addendum at the end of the document. We are working on some
> efficiency improvements on the AMI code which Supermon uses heavily. On
> larger hubs with multiple Supermon users the amount of CPU resources it
> uses
> is significant. Internally the AMI was not designed for this amount of
> loading so this update lays the groundwork for the AMI update. A
> forthcoming
> update will complete that change. Supermon 6.2 gives you the ability to
> change the update speed of the display which by default is .5 seconds. It
> can now be set to as long as 5 seconds if desire to reduce the loading when
> multiple users are accessing it.
>
> Another significant Supermon change is the adding of a second level of
> security. If setup certain buttons are only available to what we would call
> a super admin. So presently there are three possible levels - no login sees
> the connected nodes and their status, Level two see only buttons that would
> not directly cause system disruption if used inappropriately. Level three
> see all the button. If level three is not setup which is the default
> behavior then level two see all the buttons. This is explained in the
> addendum. You are basically setting up another user/pass in the edit
> directory.
>
> lsnodes has changed due to security issues! The frequency of Internet
> hacking has increased immensely in the last few months and we are always
> looking at ways to improve the security of the Hamvoip code. Unfortunately
> the command part of lsnodes is not secure therefore we have taken the
> command mode out of lsnodes. Users should use supermon for command
> operation. Supermon is part of ALL Hamvoip installations and is easy to
> setup. Instructions are in the manual mentioned above. lsnodes links are in
> Supermon.
>
> An exciting change has been made to the events format allowing global
> variables to be assigned and used externally. This adds the 'S' set
> parameter to the event command. Here is an example -
>
> [events69000]
> LINKS0 = G|S|${RPT_NUMALINKS}
>
> In this example we are setting a global variable (LINKS0) to the value of
> the number of direct links connected to node 69000. The G means perform the
> event on a global, in this case LINKS0, and the S means set it to the value
> of RPT_NUMALINKS. Events change automatically at every connect/disconnect
> operation or system event change.
>
> This completely eliminates the need to have an external script do this.
> This global variable can then be used in the extensions.conf file or
> elsewhere.
>
> Internally thread naming has been added to aid in debugging.
>
> Use the admin menu item 1 to update your node. It is important do do
> updates
> on a timely basis as code changes add features and enhancements you will
> not
> have it you do not update. The complete name of this version is Asterisk
> 1.4.23-pre.hamvoip-V1.6.2-03-app_rpt-0.327-04/16/2020
>
> The next update is scheduled to include an updated ssh and firewall example
> code to protect ssh ports.
>
>
> *73 Doug, WA3DSP*
> *http://wa3dsp.org <http://wa3dsp.org>*
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>