[arm-allstar] Backing up files on bad SD Card

[Mike Sullivan]

I did clear htpasswd and re-set it up. I'll do it again. It's just not
showing the window at all, and the page shows a # at the end when I do
click Login.. I just checked all my other nodes and I can log in to all
three no problem.

On Tue, Apr 21, 2020 at 6:31 PM "Doug Crompton via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> Not sure why that would be. I see it here after backup. What browser are
> you using? I am using Firefox. Maybe reset your PW as per supermon manual.
>
> *73 Doug, WA3DSP*
> *http://wa3dsp.org <http://wa3dsp.org>*
>
>
>
> On Tue, Apr 21, 2020 at 6:01 PM "Mike Sullivan via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > Alright, got everything moved over.. testing everything out, configuring
> > VPN and whatnot.. however I'm trying to log in on Supermon and the login
> > window isn't popping up. Supermon pages show up fine, but when I hit
> Login,
> > I don't see the window to log in.
> >
> > On Tue, Apr 21, 2020 at 5:31 PM "Doug Crompton via ARM-allstar" <
> > arm-allstar at hamvoip.org> wrote:
> >
> > > Mike,
> > >
> > >  Well you only need to make backups if something significantly changes
> in
> > > your file. The updates from Hamvoip you can always get. Also if you
> > either
> > > keep that card as is or you read it to a file on the computer before
> > > rewriting it you can always go back and get something you forgot.
> > >
> > > *73 Doug, WA3DSP*
> > > *http://wa3dsp.org <http://wa3dsp.org>*
> > >
> > > On Tue, Apr 21, 2020 at 5:17 PM "Mike Sullivan via ARM-allstar" <
> > > arm-allstar at hamvoip.org> wrote:
> > >
> > > > Talk about perfect timing then, eh? Lol. I just wanted to make sure
> > there
> > > > wasn't a folder I was missing. I don't think this card is bad
> > > necessarily,
> > > > but something was corrupted of course since it failed to fully boot
> > up. I
> > > > need to get in the habit of doing regular backups of all the nodes I
> > > > manage.
> > > >
> > > > Mike
> > > >
> > > > On Tue, Apr 21, 2020 at 5:05 PM "Doug Crompton via ARM-allstar" <
> > > > arm-allstar at hamvoip.org> wrote:
> > > >
> > > > > Mike,
> > > > >
> > > > >  Funny you should ask this today as I just got done doing that! I
> was
> > > > > fooling around on an active node and it fail to boot .
> > > > >
> > > > > You need to, as you said, mount it so you can read it on another
> > > system.
> > > > I
> > > > > exclusively use Linux here so it just mounts right up on a card
> > reader
> > > > > plugged into usb. If your windows method works that's great. You
> need
> > > the
> > > > > /etc/asterisk directory which will include the local directory and
> > > > > /srv/http which will include supermon. Also the /etc directory and
> > any
> > > > > place else you  may have saved something. I copied these backups
> onto
> > > the
> > > > > new image mounted in Ubuntu. Then when it comes up the node should
> be
> > > > > working. You should run firsttime.sh and do an update and make sure
> > > > things
> > > > > are set correctly there but don't run the node-config as that would
> > > > > overwrite your old data. Otherwise you should be back online. There
> > is
> > > a
> > > > > backup and restore script you can run but it does not take that
> much
> > > time
> > > > > to do it manually either. If you do run that script you need to
> > > configure
> > > > > the file that specifies what files/directories to backup.
> > > > >
> > > > > *73 Doug, WA3DSP*
> > > > > *http://wa3dsp.org <http://wa3dsp.org>*
> > > > >
> > > > > On Tue, Apr 21, 2020 at 4:40 PM "Mike Sullivan via ARM-allstar" <
> > > > > arm-allstar at hamvoip.org> wrote:
> > > > >
> > > > > > While working on a new node, the SD card I had in it was
> corrupted
> > > > (This
> > > > > > node has been sitting for a while since I haven't had a chance to
> > > > install
> > > > > > it) and the system won't boot up completely. I can load it up in
> > > > Windows
> > > > > > and using Ext2fsd to mount it, I can pull off the files that I
> need
> > > for
> > > > > > configurations. I pulled the entire /etc/asterisk folder, and the
> > > > entire
> > > > > > /srv/http folder. I wanted to see if there were any other files I
> > > could
> > > > > > pull before I try to rebuild the system. I really don't want to
> > re-do
> > > > the
> > > > > > entire configuration if I don't have to..
> > > > > >
> > > > > > Mike
> > > > > > _______________________________________________
> > > > > >
> > > > > > ARM-allstar mailing list
> > > > > > ARM-allstar at hamvoip.org
> > > > > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > > > > >
> > > > > > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> > > > > >
> > > > > _______________________________________________
> > > > >
> > > > > ARM-allstar mailing list
> > > > > ARM-allstar at hamvoip.org
> > > > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > > > >
> > > > > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> > > > >
> > > > _______________________________________________
> > > >
> > > > ARM-allstar mailing list
> > > > ARM-allstar at hamvoip.org
> > > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > > >
> > > > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> > > >
> > > _______________________________________________
> > >
> > > ARM-allstar mailing list
> > > ARM-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> > >
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> >
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>