[arm-allstar] hamvoip as a repeater controller

[John "Jason" Gnatowsky]

We've got several 220 repeaters running with hanvoip as the controller. Works great! Most of the changes would be configured in rpt.conf

On April 17, 2020 4:12:28 AM EDT, "Jed Barton via ARM-allstar" <arm-allstar at hamvoip.org> wrote:
>Hey guys,
>
>OK, so i'm working on a new 220 repeater.  As much as i love my scoms,
>i thought i would look at hamvoip as a repeater controller. I'd like
>some feedback.  Here are some of the things that i need to do.
>
>be able to turn the repeater on and off with some sort of confirmation
>that it happened.
>mute dtmf tones, so all the tones don't go out of the repeater
>transmitter
>set timers so you can change things like when the courtesy tone plays
>after you unkey, and a hang time after the courtesy tone until the
>repeater drops.
>do custom commands to turn the repeater transmitter on and off
>
>
>I'm sure i'll think of more, but these are the basics.
>I was just thinking rather than spend 500 on an scom 7330, i might try
>this.
>Where would i make a lot of these changes?
>If anyone can help, or has done this sort of thing with hamvoip, that
>would be awesome.
>
>Cheers,
>
>Jed
>_______________________________________________
>
>ARM-allstar mailing list
>ARM-allstar at hamvoip.org
>http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
>Visit the BBB and RPi2/3/4 web page - http://hamvoip.org

-- 
Jason Gnatowsky------KG4FJC