[arm-allstar] Frequency agile remote base

[David Bufkin]

Thank y’all for the response. The only reason is because I have a v7a with a faulty display and this would be perfect to get some use out of it. When I make the cable and all that good stuff will I have to basically build another node minus the simplex radio and then connect my current node to it to be able to controll it?

Sent from my iPhone

> On Apr 15, 2020, at 1:46 PM, Doug Crompton via ARM-allstar <arm-allstar at hamvoip.org> wrote:
> 
> Clarification:  This interface is for the V7A and is NOT needed for the
> V71A.
> 
> *73 Doug, WA3DSP*
> *http://wa3dsp.org <http://wa3dsp.org>*
> 
>> On Wed, Apr 15, 2020 at 2:43 PM Doug Crompton <wa3dsp at gmail.com> wrote:
>> 
>> Now I understand what you are talking about. I am attaching the schematic
>> of the interface which I re-did several years ago. This allows the
>> connection of both audio and data to the radio you are using. I do not have
>> this radio nor have I used the interface. You would need to build this
>> interface.
>> 
>> *73 Doug, WA3DSP*
>> *http://wa3dsp.org <http://wa3dsp.org>*
>> 
>> On Wed, Apr 15, 2020 at 2:36 PM "David McGough via ARM-allstar" <
>> arm-allstar at hamvoip.org> wrote:
>> 
>>> 
>>> Hi David,
>>> 
>>> Yes, I've used several different radios with hamlib and it works well.
>>> 
>>> I'm sure you realize that the TM-V7A is a 20+ year old radio and aren't
>>> readily available for acquisition by a new user.  I've got a couple
>>> TM-G707A
>>> radios which I use with hamlib, using the adapter interface that Jim
>>> Dixon
>>> designed years ago. Here is a link showing info about this interface:
>>> 
>>> https://wiki.allstarlink.org/wiki/Cable_Adapter_Card_for_TMG-707A
>>> 
>>> The TM-G707A radios are not readily found, either, of course.
>>> 
>>> My recommendation would be to be prepared to do some research and
>>> experimenation....Or, get a currently available radio that has advertised
>>> support.
>>> 
>>> 73, David KB4FXC
>>> 
>>> 
>>> 
>>>> On Wed, 15 Apr 2020, "David Bufkin via ARM-allstar" wrote:
>>> 
>>>> I asked here earlier if anyone has used a Kenwood v7a via hamlib
>>> that’s on the hamvoip. Has anyone done that with another radio? Just
>>> trying to get an idea how to do it and how it’s controlled.
>>> 
>>> Sent from my iPhone
>>> _______________________________________________
>>> 
>>> ARM-allstar mailing list
>>> ARM-allstar at hamvoip.org
>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>> 
>>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>>> 
>>> _______________________________________________
>>> 
>>> ARM-allstar mailing list
>>> ARM-allstar at hamvoip.org
>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>> 
>>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>>> 
>> 
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org