[arm-allstar] Frequency agile remote base

[David McGough]

Hi David,

Yes, I've used several different radios with hamlib and it works well.

I'm sure you realize that the TM-V7A is a 20+ year old radio and aren't 
readily available for acquisition by a new user.  I've got a couple TM-G707A 
radios which I use with hamlib, using the adapter interface that Jim Dixon 
designed years ago. Here is a link showing info about this interface:

https://wiki.allstarlink.org/wiki/Cable_Adapter_Card_for_TMG-707A

The TM-G707A radios are not readily found, either, of course.

My recommendation would be to be prepared to do some research and 
experimenation....Or, get a currently available radio that has advertised 
support.

73, David K4FXC



On Wed, 15 Apr 2020, "David Bufkin via ARM-allstar" wrote:

> I asked here earlier if anyone has used a Kenwood v7a via hamlib 
that’s on the hamvoip. Has anyone done that with another radio? Just 
trying to get an idea how to do it and how it’s controlled. 

Sent from my iPhone
_______________________________________________

ARM-allstar mailing list
ARM-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3/4 web page - http://hamvoip.org