[arm-allstar] People cutting out

[DAVE Enright]

Thanks very much.

On Fri, Sep 27, 2019, 2:12 PM "George Gianios via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> Got it today -- I'll run a few tests
> But I can tell you the WW is the problem -- It needs to be 12 volts at 3
> amps or better.
> I'll let you know what I find
> George
>
> -----Original Message-----
> From: ARM-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
> "DAVE Enright via ARM-allstar"
> Sent: Monday, September 23, 2019 9:40 PM
> To: kg5rdf
> Cc: DAVE Enright; ARM Allstar
> Subject: Re: [arm-allstar] People cutting out
>
> Thanks!
>
> On Mon, Sep 23, 2019 at 9:26 PM kg5rdf <kg5rdf at gmail.com> wrote:
>
> > I agree with the battery eliminator issues. I would also check the
> > FOB, if purchased as a package. I found that the foil shield was
> > exposed and shorted components. Using an antenna extended via coax was
> > also a great help.
> >
> > David KG5RDF
> >
> > -------- Original message --------
> > From: DAVE Enright via ARM-allstar <arm-allstar at hamvoip.org>
> > Date: 9/23/19 8:04 PM (GMT-06:00)
> > To: ARM Allstar <arm-allstar at hamvoip.org>
> > Cc: DAVE Enright <kd2rer at gmail.com>
> > Subject: Re: [arm-allstar] People cutting out
> >
> > I think the problem is a bad battery eliminator pack for my UV-82.
> > When that is used with the radio I have the problem. When I put on
> > just the battery, it goes away
> >
> > On Sun, Sep 22, 2019 at 11:37 PM "Jason via ARM-allstar" <
> > arm-allstar at hamvoip.org> wrote:
> >
> > > I've noticed this behavior when I was downloading a very large file
> > > that was using up all of my bandwidth. Might check your internet
> > > connection speed, who/what devices are using it.... Maybe check out
> > > your QOS
> > settings
> > > in your router to give the node a higher priority than other users
> > > if
> > it's
> > > bandwidth related.
> > >
> > > 73
> > > Jason - N6WBL
> > >
> > > On Sun, Sep 22, 2019 at 1:51 PM "DAVE Enright via ARM-allstar" <
> > > arm-allstar at hamvoip.org> wrote:
> > >
> > > > This is driving me nuts. I goto a node and listen. Folks are
> > > > talking
> > back
> > > > and forth, but as they are talking, it’s like they unkey the
> > > > mike(they
> > > cut
> > > > off) for a couple of seconds and it comes back talking as normal.
> > > > Is
> > > there
> > > > a setting that has to be changed in timeout???  I have a pi3
> > > > connected
> > > to a
> > > > UV-82 w/ARA-1 soundboard.
> > > >
> > > > --
> > > > *K3WHD ~ 73 Dave*
> > > > _______________________________________________
> > > >
> > > > ARM-allstar mailing list
> > > > ARM-allstar at hamvoip.org
> > > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > > >
> > > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > > _______________________________________________
> > >
> > > ARM-allstar mailing list
> > > ARM-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> >
> >
> > --
> > *K3WHD ~ 73 Dave*
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
>
>
> --
> *K3WHD ~ 73 Dave*
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org