[arm-allstar] HamVoIP Losing Telemetry after a while

[Alessio Sacchi]

I am experiencing something similar on my 1.5rc6. Not that bad though. The
Echolink telemetry stopped being sent after 24hrs or so of uptime.
Happened quite consistently over the past 2 weeks - stops sometime after a
reboot.

Actually - which might be a different issue - my Echolink telmetry (when
present) gets sent out only on my second radio port. In my setup, echolink
is on port 4 which is connected to port 1 at startup where all other ports
are connected to.  Note that eannmode=2 for all ports in my rpt.conf.

Alessio IZ4EFN

On Wed, Sep 25, 2019 at 4:44 PM "David McGough via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

>
> Josh,
>
> There having been no reports of issues like this, nor have I personally
> seen any issues like this.  Out of curiosity, what is the exact version
> you're running (info from the admin menu, option 10)?
>
> Also, are you logging audio files with the archivedir function? Or,
> streaming audio with the outstream function?
>
> What version RPi are you using? Is this a new install?
>
> 73, David KB4FXC
>
>
> On Wed, 25 Sep 2019, "Joshua Hatton via ARM-allstar" wrote:
>
> > Have an Pi with latest HamVoIP release that loses telemetry after a
> > while... No courtesy tones, will not ID (will briefly key up PTT for
> maybe
> > 1/4 of a second), No response when interrogating status... seems like if
> > it's connected to a node, internet traffic will still pass and
> transmit...
> > just does not have telemetry after running a while.  Have to pull power
> > every time.   Any thoughts on this?  Thanks! --Josh W4ZZK
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>