[arm-allstar] Echolink troubles

[John Simmons]

David,

I managed to solve the problem I posted about, it turned out to be a 
typo in the echolink.conf.

However I several other questions about the Echolink setup and operation 
that I can't seem to find the answers to.

 1. It seems that the Echolink telemetry only plays on the primary node
    on a Pi. Is there a way to make it play on another node simultaneously?
 2. How do I make an Echolink connection from the radio side via DTMF?
    For example, the Echolink test node is 9999. Sending 9999 or *9999
    from the DTMF doesn't cause a connection. I've tried from both the
    primary node and a permanent connected node.

A non-Echolink question: is there an Allstar test node? I hate to do a 
drive-by on a random node.

Thanks for your tech support.

-de John NI0K node 50191


David McGough wrote on 10/1/2019 9:45 PM:
> John,
>
> I guess echolink works from you call phone when connecting to other
> echolink nodes?  If so, this is likely a routing / NAT issue with traffic
> to or from node 50191.
>
> How does node 50191 get Internet Access?  Also, can any other echolink
> user connect to node 50191, or is it broken for everyone?
>
> 73, David KB4FXC
>
>
>
>
> On Tue, 1 Oct 2019, "John Simmons via ARM-allstar" wrote:
>
>> I have 3 nodes connected together permanently, two are a split site vhf
>> and the third is a uhf link radio. The only public node is the vhf
>> transmit, which is the second node on the Pi.
>>
>> I (think) followed the directions on setting up Echolink on the public
>> node, 50191. If I try to connect via cell I get a 'timed-out' error but
>> the uhf link radio announces a connection with the Echolink node number
>> and the Allstar node number. The callsign is not announced despite my
>> setting=3 in rpt.conf. A second connection attempt from the cell doesn't
>> announce on any radio and the cell shows timed out again.
>>
>> Suggestions please?
>>
>> -de John NI0K
>> _______________________________________________
>>
>> ARM-allstar mailing list
>> ARM-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB and RPi2/3 web page -http://hamvoip.org
>>