[arm-allstar] Stops Working

[Doug Crompton]

Chris,

 I would burn a new SD card and set it up with at minimum the node number
and node password and see if it works. If not you know you have a hardware
or Internet issue. If it continues to work then you apparently had a glitch
on your SD card. It is always good to have a test card around just for this
purpose.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Mon, Nov 25, 2019 at 9:56 PM "Chris Viningre via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> May or may not be part of the problem but after I did an update my repeater
> stops working after about 20 minutes. I'm using a RP3B+ with the latest
> hamvoip software as a controller. I lose connection with my network. I cant
> SSH into it. Both WiFi and direct cable to the router. My system has been
> working find for sometime. Now this problem has come up.
>
> Chris Viningre
> 70 W. Roadrunner
> Salt Flat, Texas 79847
> C:(915) 504-1510
> Website: ws5b.com <http://ws5b.com>
> chrisviningre at gmail.com
> chris at ws5b.com
> Ham Radio Call Sign: WS5B
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>