[arm-allstar] Echolink

[Boban Jovanovic YT1JB]

On 23.05.2019. 04:09, "Doug Crompton via ARM-allstar" wrote:
>
> cop,62,GPIO1:1 = c|t|RPT_TXKEYED
> cop,62,GPIO1:0 = c|f|RPT_TXKEYED
>
> Then in simpleusb.conf add in the radio stanza associated with this node:
>
> gpio1=out0

It looks good, but didn't work for me. I'm still not have FOB, but do some tests.

rpt.conf
========
[45010]
...
rxchannel=SimpleUSB/usb
...
events=events45010

custom/rpt.conf
===============
[events45010]
...
cop,62,GPIO1:1 = c|t|RPT_TXKEYED
cop,62,GPIO1:0 = c|f|RPT_TXKEYED

simpleusb.conf
==============
[usb]
...
gpio1=out0
...

[root at jbhamvoip asterisk]# astres.sh

PTT key

[root at jbhamvoip asterisk]# gpio readall
  +-----+-----+---------+------+---+---Pi 3---+---+------+---------+-----+-----+
  | BCM | wPi |   Name  | Mode | V | Physical | V | Mode | Name    | wPi | BCM |
  +-----+-----+---------+------+---+----++----+---+------+---------+-----+-----+
  |     |     |    3.3v |      |   |  1 || 2  |   |      | 5v      |     |     |
  |   2 |   8 |   SDA.1 |   IN | 1 |  3 || 4  |   |      | 5v      |     |     |
  |   3 |   9 |   SCL.1 |   IN | 1 |  5 || 6  |   |      | 0v      |     |     |
  |   4 |   7 | GPIO. 7 |   IN | 1 |  7 || 8  | 0 | IN   | TxD     | 15  | 14  |
  |     |     |      0v |      |   |  9 || 10 | 1 | IN   | RxD     | 16  | 15  |
  |  17 |   0 | GPIO. 0 |   IN | 0 | 11 || 12 | 0 | IN   | GPIO. 1 | 1   | 18  |
...

GPIO.1 even is not type 'out'. What's wrong?

Boban, YT1JB