[arm-allstar] Echolink

[Paul Kindell]

Charles,
Thank you so much for the help! Following your file was the key.  I didn't know the servers had to be changed.  The example file needs to be updated in the image!

I can see it now on the status page, now to try and connect!

Again, Thank You!
73, Paul

> Sent: Wednesday, May 22, 2019 at 5:35 PM
> From: "Charles Powell via ARM-allstar" <arm-allstar at hamvoip.org>
> To: "ARM Allstar" <arm-allstar at hamvoip.org>
> Cc: "Charles Powell" <5h3dx.zinga at gmail.com>
> Subject: Re: [arm-allstar] Echolink
>
> Here is my echolink.conf file.  The How-To on hamvoip.org <http://hamvoip.org/> is quite comprehensive.
>
> 73,
>
> Charles - NK8O
>
> [el0]
> confmode=no
> call=NK8O-L		           ; Change this!  You must be registered as XXXXXX-L or XXXXXX-R and this is different from your individual login
> pwd=XXXXXXXX	 	   ; Change this!
> name=Charles        	   ; Change this to your real name!
> qth=Louisburg KS    	   ; Change this to your actual QTH!
> email=XXXX at XXXX.net   ; Change this!
> maxstns=10  	    		   ; set the maximum number of users here
> rtcptimeout=10
> node=963349         		   ; Echolink node number - Change this and use your own!
> recfile=/tmp/recorded.gsm
> astnode=47337      		   ; Change this to your active Allstar node number!
> context=radio-secure
> ;server1=server1.echolink.org
> ;server2=server3.echolink.org
> ;server3=server5.echolink.org
> server1=naeast.echolink.org <http://naeast.echolink.org/>	; echolink servers have changed
> server2=nasouth.echolink.org <http://nasouth.echolink.org/>	; note changes
> server3=servers.echolink.org <http://servers.echolink.org/>	;
> server4=backup.echolink.org <http://backup.echolink.org/>	;
> ; Outgoing message
> message=This node is an AllStar bridge.\rPlease be aware you could be connected to hundreds of nodes worldwide\r\rGive your station ID if you transmit.
> ; Change following setting to your parameters
> freq=
> tone=
> lat=38.631981
> lon=-94.677393
> power=
> height=
> gain=
> dir=0
> ;deny=
> ;permit=
>
>
> > On May 22, 2019, at 3:40 PM, Boban Jovanovic YT1JB via ARM-allstar <arm-allstar at hamvoip.org> wrote:
> >
> > On 22.05.2019. 22:29, "Charles Powell via ARM-allstar" wrote:
> >> Echolink works extremely well on the HamVOIP distribution
> >
> > It's nice news! Thank you!
> >
> >> Remember the the port forwarding is UDP for 5198 and 5199, plus 5200 which is TCP.
> >
> > 5200/TCP is outgoing but 5198/UDP and 5199/UDP is incoming. For registering EchoLink node does not need incoming ports. It must be seen in list of active EchoLink nodes, but I could not achive that.
> >
> > Some config file would be nice to see here, please...
> >
> > 73, Boban YT1JB
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>