[arm-allstar] timed link disconnect from receiving node

[Fred Hillhouse]

Is rebroadcasting NOAA weather on an amateur frequency legal? I know the
answer but I highly recommend researching for yourself. Your club member
should also research it.

Best regards,
Fred N7FMH




-----Original Message-----
From: ARM-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
"Lawrence Roney via ARM-allstar"
Sent: Friday, May 17, 2019 12:26 AM
To: arm-allstar at hamvoip.org
Cc: Lawrence Roney
Subject: Re: [arm-allstar] timed link disconnect from receiving node

We have a club member who was looking to do the same thing with their
"weather" node.  The node's audio input comes from a receiver that's tuned
to the regional NOAA weather broadcast loop.  As a safeguard, they asked me
if there was a way to force disconnect an incoming call after 3 minutes,
which is enough time to hear the loop broadcast in its entirety, but then
drop the link so it could not inadvertently tie up a repeater.

Thanks Doug,

Lawrence - N6YFN

------------------------------
Message: 2
Date: Thu, 16 May 2019 01:10:06 -0400
From: Doug Crompton <wa3dsp at gmail.com>
To: ARM Allstar <arm-allstar at hamvoip.org>
Subject: Re: [arm-allstar] timed link disconnect from receiving node
Message-ID:
	<CAMp6vssQ+4aXj9ZRLeg3eqM0KKypo2r6L_o3n_FcxVYv3HmBcw at mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"

Butch,

 First of I must point out we are not DMR. If someone connects somewhere and
they are not causing a problem in my opinion it would be impolite to
disconnect them. I see no reason to do that in most situations. Many people
connect and are lurkers which is fine. It would also raise all kinds of
questions as to why it happened. The network or Allstar would be blamed for
disconnects unless you somehow made it clear that this would happen after so
much inactive time. Also the Allstar reconnect feature of permanent connects
could override it. In other words if you had a disconnect time out either
internally or in a script someone else could have a reconnect. There is
really no reason why someone can't stay connected. My combined hubs have
50-60 connects on a daily basis and others have more without problems. Most
are permanent connects so if the hub resets they all reconnect within a few
seconds.

My question would be why would you want to do this? What purpose would it
have in Allstar?


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Thu, May 16, 2019 at 12:51 AM "Butch Herring via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> Is there a way for a "connected to" node to automatically disconnect a 
> "connected from" node after a certain length of time without affecting 
> other ongoing connections? I'm pretty sure I understand the way 
> lnkactenable and lnkacttime affect the node where the connect 
> originated from... i.e., lack of activity after a period of time such 
> as driving out of range, etc. However, I haven't figured out a way for the
"connected to"
> node to initiate a disconnect after a certain period of inactivity.
>
> To further clarify my question, consider how the Brandmeister DMR 
> network handles dynamic talk-group connections, whereby the connection 
> is automatically broken after fifteen minutes of inactivity.
>
> Butch, W5BE
> _______________________________________________



_______________________________________________

ARM-allstar mailing list
ARM-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus