[arm-allstar] Node Temp

[Doug Crompton]

Glenn,

 123F is a reasonable CPU temperature. It is highly dependent on
ambient temperature and CPU usage. I suspect the one at the site is seeing
higher ambient at the board in spite of the air conditioning and/or it is
seeing higher CPU usage. It is also dependent on whether you are using
turbo mode or not.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Wed, May 8, 2019 at 10:08 AM "Glenn via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> Howdy, have question on node temp. I have (3) nodes PI3+ running..(2) on
> local net work that are running (96-97) deg F..the third one is at
> repeater site which is in air cond room running at 123 def F..all (3)
> have the little built fans running,,,do I need to replace the node at
> the repeater site?
> Glenn K5COD
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>