[arm-allstar] Node Drops Connection - W4ZZK

[Doug Crompton]

Josh,

Do a dns-query for both nodes -   dns-query node   - at the linux prompt.
If either one has a ,y at the end you have it set up as a remote base which
you should not. Go to allstarlink.org and uncheck the remote base check box
for each node that as it checked.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*



On Sat, Mar 30, 2019 at 8:01 PM "Joshua Hatton via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> Doug
>
> Recently moved for a new job, and want to stay in contact with a low-power
> repeater near my old home. I have installed a Pi with HamVoIP and a
> single-channel Moto radio at a relative's home, setup as a "private" node.
> At my new home, I have a normal setup node.  Both are on networks with
> static IPs on each end, and have their internal IP and port 4569 routed
> properly.  I also have them mapped out at the end of their respective
> rpt.conf files and iax.conf files.
>
> I am having success in making connection and having a 'brief' conversation
> with the repeater back home, because the link drops after about a
> minute....Every time.
>
> Any thoughts?
>
> Thanks!
> Josh Hatton W4ZZK
> NW Alabama
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>