[arm-allstar] Proxy Node

[Doug Crompton]

Jessie,

  There is Google compute for Archlinux. here is the link for it.  Perhaps
we could mke it available as a package if there is any interest.

https://github.com/GoogleCloudPlatform/compute-archlinux-image-builder


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*



On Fri, Mar 29, 2019 at 2:21 PM "Jesse Royall via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> Correct.
> And I think it’s a processor issue as well since hamvoip is arm. I was
> aware the *4 doesn’t work out of the box but Google Compute also uses a
> different processor. Which is why I went with their basic Linux. I know
> y’all are working on a pc version and as soon as that presents itself I
> will switch and enable remote commands and see how that goes.
>
> All I had to figure out was the firewall forwarding on google console to
> make things work.
>
> I think KV4S? Had a write up on how to setup AWS and I adapted to google
> and setup macros and memories to make things work on my end.
>
> Thanks again just wanted to show another option as opposed to trying to
> get a vpn and all that good stuff for those of us trying to keep it simple.
>
> Sent from my iPhone
>
> > On Mar 29, 2019, at 11:14 AM, Jesse Royall via ARM-allstar <
> arm-allstar at hamvoip.org> wrote:
> >
> > Right now I use google compute engine. Which is my web based node. Then
> I issue *4 to connect out to others and programmed the dtmf into my dtmf
> memory channels in my radio to call out from there. I have a node that is
> double natted and so I set a permanent connect to my google node then I can
> issue my dtmf memories from there to common nodes I connect to.
> >
> > Kinda like AWS but much cheaper (free).
> >
> > I did have to use ASL image to get it going.
> >
> >
> > Sent from my iPhone
> >
> >> On Mar 29, 2019, at 9:46 AM, Doug Crompton via ARM-allstar <
> arm-allstar at hamvoip.org> wrote:
> >>
> >> Marty,
> >>
> >> Typically you cannot connect TO a phone hotspot but you should be able
> to
> >> connect FROM it to any valid Allstar node. A VPN would get around this
> but
> >> the question is do you really need the ability to have others connect TO
> >> you? I usually tell hot spot users to connect to a fixed home node,
> either
> >> theirs or some common point where others can find them and connect to.
> >>
> >> We are working on a way around this without using a VPN as so many are
> >> using phones at this point.
> >>
> >>
> >> *73 Doug*
> >>
> >> *WA3DSP*
> >>
> >> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> >>
> >> On Fri, Mar 29, 2019 at 9:59 AM "Marty via ARM-allstar" <
> >> arm-allstar at hamvoip.org> wrote:
> >>
> >>> I've been working on getting my portable node to work off my cell phone
> >>> service to my main node on my broadband service to handle the port
> >>> fwding issue. I recently changed my broadband service to DHCP IP but
> >>> using dyndns.org to keep up and fwd my changing IP to keep things
> >>> pointed to my main node.
> >>>
> >>> I can connect to my main node from the portable but can't connect to
> any
> >>> other node from my portable or connect from the broadband node to the
> >>> portable node. I guess this is because of a DHCP address on the cell
> >>> service. I'm not sure what else I am missing.
> >>>
> >>> 73-Marty-KD4HLV
> >>>
> >>> _______________________________________________
> >>>
> >>> ARM-allstar mailing list
> >>> ARM-allstar at hamvoip.org
> >>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>>
> >>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >>>
> >> _______________________________________________
> >>
> >> ARM-allstar mailing list
> >> ARM-allstar at hamvoip.org
> >> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>
> >> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org