[arm-allstar] two nodes on one lan

Angelo Glorioso n5uxt at hotmail.com
Fri Mar 22 13:43:34 EDT 2019


Hi Doug,

  I am a little confused here. Sorry :-)

PI Star 1 - server1 29719 -iax port 4580 -local ip lans is 192.168.1.178

                 Node under server 1 is 29734

If I understand you I need to add this to server 1 -RPT.CONF

radio at 70.186.120.167:4580/29719,70.186.120.167
radio at 70.186.120.167:4580/29734,70.186.120.167

radio at 70.186.120.167:4580/29734,70.186.120.167

PI star2 - server2 -29989 - iax port 4572 -local ip lan 192.168.1.110 - 
no additional nodes.

So, we are only using one EXT IP address of : 70.186.120.167


If I understand you I need to add this to server 2

radio at 70.186.120.167:4572/29989,70.186.120.167


Sorry for not understand. Hard to get your head around this. By the way, 
I am able to connect outside the network with no issues. I have not had 
anyone try inbound though.


Angelo




On 3/22/2019 12:18 PM, "Doug Crompton via ARM-allstar" wrote:
> Angelo,
>
> The ports are wrong. You need to setup ports at BOTH your end and the
> allstarlink.org end. They both show as port 4580.
>
> [root at 27225-HUB etc]# dns-query 29719
> +OK|radio at 70.186.120.167:4580/29719,70.186.120.167
>
> [root at 27225-HUB etc]# dns-query 29734
> +OK|radio at 70.186.120.167:4580/29734,70.186.120.167
>
> This indicates the allstarlink end is set wrong. You need two servers there
> with each node on one server if these are really on two different servers
> (Pi's)
>
> If these nodes are on different servers (Pi's) then they need to be on
> different IAX ports. Set this in iax.conf on each one and at allstarlink.org
> for each server.
>
> If you port forward BOTH in your router there is a good chance that it will
> work. If not or if you don't want to port forward both you will have to
> enter routing information between them in the [nodes] stanza of rpt.conf.
> The info would be the local IP address and port of the other server.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
> On Fri, Mar 22, 2019 at 1:10 PM "Angelo Glorioso via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
>>   I have trying to get two allstar nodes on my local lan to connect from
>> inside and outside. I looked that the docs on the hamvvoip web site and
>> follow the directions but I am still unable to connect inside or outside
>> the network.
>>
>>
>>
>> Configurations server : 29719 port 4580 local ip address is 192.168.1.178
>> - second node 29734
>>
>> In RPT.CONF
>>
>> 29719 = radio at 127.0.0.1/29719,NONE<mailto:radio at 127.0.0.1/29719,NONE>
>>
>> 29989 = radio at 192.168.1.110:4572/29989,NONE<mailto:radio at 192.168.1.110
>> :4572/29989,NONE>
>>
>> Connection log :
>>
>>
>> Fri Mar 22 10:13:26 CDT 2019 == 29719 Disconnected AllStar 29989 =v= N5UXT
>> Rover rover (70.186.120.167/4572)
>> Fri Mar 22 10:17:12 CDT 2019 == 29719 Disconnected AllStar 29989 =v= N5UXT
>> Rover rover (70.186.120.167/4572)
>> Fri Mar 22 10:20:18 CDT 2019 == 29719 Disconnected AllStar 29989 =v= N5UXT
>> Rover rover (70.186.120.167/4572)
>>
>>
>> Second node server 29989 port 4572 address is 192.168.1.110 - no
>> additional nodes as of now.
>>
>> In RPT.CONF
>>
>> 29989 = radio at 127.0.0.1/29989,NONE<mailto:radio at 127.0.0.1/29989,NONE>
>> 29719 = radio at 192.168.1.178:4580/29719,NONE<mailto:radio at 192.168.1.178
>> :4580/29719,NONE>
>>
>>
>>   Any help would be appreciated.
>>
>> Angelo
>>
>>
>>
>>
>>
>>
>> _______________________________________________
>>
>> ARM-allstar mailing list
>> ARM-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org


More information about the ARM-allstar mailing list