[arm-allstar] Parrot Mode, what am I doing wrong?
wa3dsp at gmail.com
Fri Mar 22 01:32:55 EDT 2019
There is no parrrotmode= command in rpt.conf. The command is parrot=
and it should be set to 0 but the default is 0 so you can leave it out.
There is a parrottime= which defaults to 1000 so again you can leave that
out. If used these commands go in the node stanza you want to parrot.
The function commands you gave are correct and they go in the function
stanza. With the default setting you send the command and talk without
releasing PTT. It will repeat back in 1000ms - 1 second after releasing
Also if you are doing this locally just for testing there is a parrot
command in simpleusb-tune-menu. Obviously this cannot be controlled by DTMF.
On Thu, Mar 21, 2019 at 10:13 PM "Sean McCarthy via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:
> So, I've added:
> To the node stanza AND
> 9921=cop,21 ; Enable Parrot Mode
> 9922=cop,22 ; Disable Parrot Mode
> 9923=cop,23 ; Cancel Parrot Stream
> 9955=cop,55 ; Parrot Once
> In the functions
> DTMF *9921 or *9955 decoding properly but no parrot...
> I'm sure I'm missing something here?
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
More information about the ARM-allstar