[arm-allstar] Portable node not connecting to my hub at home.

[Larry]

Vendle

On the node you took to your Son's place, If you entered into its NODE 
section the LAN IP used while at your home location. Usually needed to 
connect to other nodes on your Home LAN. You will need to remove or 
comment that information out while the node is in use at your Sons 
location.

Larry - N7FM


On 3/5/19 7:47 AM, "Vendel via ARM-allstar" wrote:
> Yet another question. When I set up my repeater controller, my hub and my portable node, I made the changes to iax.conf and rpt.conf so they could all talk to each other on the same LAN. I took the portable node to my sons house and after connecting to his wifi found that I could connect to other nodes and hubs but not my own. I wasn’t going to change any ports on his router and am only interested in outgoing connections. Now that I am using this node outside of my LAN, do I have to make any changes to those two files? Thanks in advance, Vendel/ K2DSI.
>
> Sent from Mail for Windows 10
>
>
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org