[arm-allstar] Shut down board.

[Doug Crompton]

Brad,

There must have been a misunderstanding. As I said the board is being used
in the radio-less and yellow box servers and as an individual product.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Wed, Jun 26, 2019 at 11:57 PM "Brad Trogdon via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> Doug,  Last time this thread came up I reached out to George whom replied
> that the board was no longer available.  Is this no longer the case?   Is
> there another source?
>
> -Brad
>
> Re:   have UPS and a automatic generator which takes care of the problem
> but
> most do not so at least a small UPS is a good investment. With Linux you
> can have it shut down gracefully by command of the UPS after a certain
> amount of time
>
>  well in a fixed environment. The board is followed by a power supply
> to 5V so you can run it on any battery or fixed source of 9 to more than
> 12V
>
>
> *73 Doug*
>
> *WA3DSP
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>