[arm-allstar] Strange issues with ASL

[Rachid Karroo]

Oops sorry for that :(

Yes I am using the latest version of Hamvoip after recent updates.

Rachid

On Wed, Jun 26, 2019 at 10:46 AM "Doug Crompton via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> Rachid,
>
>    You use the term ASL which is not hamvoip. Are you using hamvoip V1.5
> latest update?
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
> On Wed, Jun 26, 2019 at 1:57 AM "Rachid Karroo via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > Hi all
> > I ran into a strange issue with my ASL Node this morning. My setup USB
> RIM
> > Lite with Yaesu FT857D (UHF) and USB Maxtrac with Motorola GM300 (VHF). I
> > have no issues to connect to any other Node and signal is retransmitted
> > locally on frequency.
> > The issue :-
> > - Both radios would not detect activity on frequency. In Supermon, both
> > Nodes remain idle. On Simple USB application, COS status shows " keyed".
> > ASL Settings :-
> > - Simple USB setting for Yaesu - COS from USB and CTCSS from USB
> > - Simple USB setting for Motorola - COS No and CTCSS from USB
> >
> > There was some intermittent power cut yesterday and I am suspecting that
> > may be the issue is software that is issue with the SD card.
> >
> > Has anybody got SD card issues and related?
> >
> > 73s
> > Rachid
> > 3B8FP
> > Node : 40248
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>