[arm-allstar] Replaced Repeater Controller/ Node with new Pi 3B+

[Doug Crompton]

Vendel,

6=autopatchup,context=voipms,noct=1,farenddisconnect=1,dialtime=20000,quiet=1

The context name is the name of the stanza which is called in
extensions.conf, noct=1 means there will be no courtesy tone with
autopatch. farenddisconnect=1 means if someone hangs up it disconnects,
dialtime=20000 means it allows 20 seconds for someone (slow!) to dial all
the digits, quiet=1 means don't send any dialtone or pre-call message just
connect.

All this info is here -

https://wiki.allstarlink.org/wiki/Setup_Autopatch


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*



On Tue, Jun 25, 2019 at 2:47 PM "Vendel via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> Hi Doug. Ref the autopatch issue, I checked everything you suggested and
> all checked out OK. In Rpt.conf, what does the “quiet=1” in the line
> 6=autopatchup,context=voipms,noct=1,farenddisconnect=1,dialtime=20000,quiet=1
> do?
> BTW autopatch started working again. Go figure. As usual I owe you a beer.
> (more like lunch) Thanks again.
>
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org