[arm-allstar] allmon help needed

[Doug Crompton]

Kevin,

 The second node if it is on the same server would be another section in
the allmon.ini file.   Why are you using allmon and not supermon? In any
event here is an example for supermon with two nodes on the same server -

[40000]
host=127.0.0.1:5038
user=admin
passwd=yourPW
menu=yes
system=Nodes
hideNodeURL=no

[40001]
host=127.0.0.1:5038
user=admin
passwd=yourPW
menu=yes
system=Nodes
hideNodeURL=no



*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Thu, Jul 18, 2019 at 9:58 PM "Kevin Halton via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> I am pulling the little hair I have left out of my head trying to figure
> this out. I have Allmon running with no issues on all my nodes except one.
>
>
>
> I installed a second node along side a working node (2 nodes installed on
> one RPI) so I can use Zoiper when out on the road. Everything is working
> fine except it will not connect to Allmon. I copied the information from
> the
> already working node and just changed the node # as I have done in the
> past.
> The strange thing is that the first node is showing up fine!
>
>
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>