[arm-allstar] Echolink Deny=

[Paul - KN2R]

Also remember to use permit= or deny=, not both! There seems to be issues
using both!

-----Original Message-----
From: ARM-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
"Doug Crompton via ARM-allstar"
Sent: Saturday, July 13, 2019 2:26 AM
To: ARM Allstar
Cc: Doug Crompton
Subject: Re: [arm-allstar] Echolink Deny=

Also when you enter data in the echolink.conf file you must restart asterisk
for it to take effect. You cannot just reload chan_echolink.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Sat, Jul 13, 2019 at 12:42 AM Doug Crompton <wa3dsp at gmail.com> wrote:

> It should be entered as a1abc*,a2abc*, etc.
>
> This prevents the call and -L and -R with the call from also connecting.
> Assuming that is what you want to do.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
> On Sat, Jul 13, 2019 at 12:31 AM "Sean McCarthy via ARM-allstar" < 
> arm-allstar at hamvoip.org> wrote:
>
>> Anyone know why deny=a1abc in echolink.conf wouldn't be preventing 
>> a1abc from connecting to my node? (a1abc is not the call in case it 
>> isn't
>> obvious)
>>
>> I know this is not a Hamvoip specific problem, but I find most of us 
>> stumble across the same issues...
>>
>> Thanks,
>> Sean
>> _______________________________________________
>>
>> ARM-allstar mailing list
>> ARM-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>
>
_______________________________________________

ARM-allstar mailing list
ARM-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org