[arm-allstar] WIN32DISKIMAGER

[Doug Crompton]

I see that win32diskimager version 1.0 now has that check box for reading
only active partitions but I am not sure if I would trust it. The hamvoip
image uncompressed is 4G in size. So if it is reading less than that it
probably did not get it right.

dd for Windows is available. I have no idea how well it works since I do
not use Windows but it does work very similar to dd for Linux. Download
here -

http://www.chrysocome.net/downloads/dd-0.5.zip

Info here -

http://www.chrysocome.net//dd

Be very careful with dd in Linux or Windows when writing that you are
specifying the correct device!


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Fri, Jul 5, 2019 at 3:23 PM "nn3f--- via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> When you copy a SD that you want to transfer to a new SD, always put a
> check in the box in front of Read only Allocated Partitions.  The
> program will only copy the information you want.  If you don't check the
> box, it will copy the whole SD which then fills or corrupts the new SD.
>
> Ken
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>