[arm-allstar] Tait TB-7100
Wayne Jauss
jauss at pacbell.net
Sun Jan 27 07:30:14 EST 2019
I have a UHF Tait TB-7100 connected to my Raspberry Pi/ URI, works great. I used a 2 relay board found on E-Bay that isolates the PTT and RX for safety, I use same for the TB-8100 and TB-9100 repeaters. Only issue is having the module to tune the radio for the ham band, but I have that as well.Wayne Jauss / N6TBQ
On Saturday, January 26, 2019, 8:17:26 PM PST, arm-allstar-request at hamvoip.org <arm-allstar-request at hamvoip.org> wrote:
Send ARM-allstar mailing list submissions to
arm-allstar at hamvoip.org
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
or, via email, send a message with subject or body 'help' to
arm-allstar-request at hamvoip.org
You can reach the person managing the list at
arm-allstar-owner at hamvoip.org
When replying, please edit your Subject line so it is more specific
than "Re: Contents of ARM-allstar digest..."
Today's Topics:
1. Tait TB7100 ? (Gervais Fillion)
2. Re: email?? (Douglas Goree)
3. Re: email?? (Bill Kittilson)
4. Re: email?? (Gervais Fillion)
5. Announcing a New series of FOBS (Doug Crompton)
6. Re: email?? (Gervais Fillion)
7. Re: Announcing a New series of FOBS (Chris)
----------------------------------------------------------------------
Message: 1
Date: Sat, 26 Jan 2019 18:17:23 +0000
From: Gervais Fillion <ve2ckn2 at hotmail.fr>
To: ARM Allstar <arm-allstar at hamvoip.org>
Subject: [arm-allstar] Tait TB7100 ?
Message-ID:
<BN6PR2201MB1298F1FAA180FE381E9485A9CF940 at BN6PR2201MB1298.namprd22.prod.outlook.com>
Content-Type: text/plain; charset="iso-8859-1"
hi,
anyone have connected an interface on a Tait TB7100?
using a Raspberry Pi 3 ??
thanks
gervais,ve2ckn
------------------------------
Message: 2
Date: Sat, 26 Jan 2019 19:29:55 -0600
From: Douglas Goree <degforyou at gmail.com>
To: ARM Allstar <arm-allstar at hamvoip.org>
Subject: Re: [arm-allstar] email??
Message-ID:
<CAEpMeozd1WU9jxgiJB8SUKxDPkBUibjGX4XqO=wziD5q+GhPOg at mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"
Get a Uri want have to do anything but connect usb cable. When I sent mine
to Russ-WL7LP and he tried to use my sound fob and to hard to get done
right he got a Uri put on my node works good. The cost is not to high if
you can spare I think it is about 60 or 70 dollars.
On Sat, Jan 26, 2019 at 8:20 AM "Gervais Fillion via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:
> hi all member,
> i sent some emails in the group and i dont see them,
> is the email server working corectly?
>
> i need 2 modify soundcard for projects here,i try too weld mine and did
> not go as plan!!!
>
> any chance i could find 2 in canada ( because of the shipping cost)
>
>
> 73
> gervais
> ve2ckn
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
------------------------------
Message: 3
Date: Sat, 26 Jan 2019 21:25:36 -0500
From: Bill Kittilson <bill at kittilson.com>
To: ARM Allstar <arm-allstar at hamvoip.org>
Subject: Re: [arm-allstar] email??
Message-ID: <704967E6-EFF7-4F70-A8C4-B982062091D5 at kittilson.com>
Content-Type: text/plain; charset=us-ascii
These guys have nice stuff too.
http://www.repeater-builder.com/products/usb-rim-lite.html
> On Jan 26, 2019, at 8:29 PM, Douglas Goree via ARM-allstar <arm-allstar at hamvoip.org> wrote:
>
> Get a Uri want have to do anything but connect usb cable. When I sent mine
> to Russ-WL7LP and he tried to use my sound fob and to hard to get done
> right he got a Uri put on my node works good. The cost is not to high if
> you can spare I think it is about 60 or 70 dollars.
>
> On Sat, Jan 26, 2019 at 8:20 AM "Gervais Fillion via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
>> hi all member,
>> i sent some emails in the group and i dont see them,
>> is the email server working corectly?
>>
>> i need 2 modify soundcard for projects here,i try too weld mine and did
>> not go as plan!!!
>>
>> any chance i could find 2 in canada ( because of the shipping cost)
>>
>>
>> 73
>> gervais
>> ve2ckn
>>
>> _______________________________________________
>>
>> ARM-allstar mailing list
>> ARM-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
------------------------------
Message: 4
Date: Sun, 27 Jan 2019 02:18:16 +0000
From: Gervais Fillion <ve2ckn2 at hotmail.fr>
To: ARM Allstar <arm-allstar at hamvoip.org>
Subject: Re: [arm-allstar] email??
Message-ID:
<BN6PR2201MB129859C992FBFA332405C950CF950 at BN6PR2201MB1298.namprd22.prod.outlook.com>
Content-Type: text/plain; charset="iso-8859-1"
I have one node here that is using an Raspberry 3 and a soundcard and it is working no1,
it would be easy for me ,more easy too connect at one radio here .
i dont know much about the URI,
are they any videos somewhere??
gervais
________________________________
De : ARM-allstar <arm-allstar-bounces at hamvoip.org> de la part de "Douglas Goree via ARM-allstar" <arm-allstar at hamvoip.org>
Envoy? : 26 janvier 2019 20:29
? : ARM Allstar
Cc : Douglas Goree
Objet : Re: [arm-allstar] email??
Get a Uri want have to do anything but connect usb cable. When I sent mine
to Russ-WL7LP and he tried to use my sound fob and to hard to get done
right he got a Uri put on my node works good. The cost is not to high if
you can spare I think it is about 60 or 70 dollars.
On Sat, Jan 26, 2019 at 8:20 AM "Gervais Fillion via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:
> hi all member,
> i sent some emails in the group and i dont see them,
> is the email server working corectly?
>
> i need 2 modify soundcard for projects here,i try too weld mine and did
> not go as plan!!!
>
> any chance i could find 2 in canada ( because of the shipping cost)
>
>
> 73
> gervais
> ve2ckn
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
_______________________________________________
ARM-allstar mailing list
ARM-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
Visit the BBB and RPi2/3 web page - http://hamvoip.org
------------------------------
Message: 5
Date: Sat, 26 Jan 2019 22:37:18 -0500
From: Doug Crompton <wa3dsp at gmail.com>
To: ARM Allstar <arm-allstar at hamvoip.org>
Subject: [arm-allstar] Announcing a New series of FOBS
Message-ID:
<CAMp6vss=vsw0nJhe7ELBy44JOp9qFUzCDXn-5cW=ZsKo7AGT_w at mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"
I am pleased to announce two new FOBS available now for Allstar
interfacing. The ARA-1 and ARA-1+ are completely assembled USB to radio
interface boards with cables. These are US made and use the latest CM119B
chips. They are competitively priced.
The ARA-1 is a small board with just the I/O for a radio - Audio in/out,
COS, and PTT.
The ARA-1+ Includes CTCSS for the radio port and a 6 bit GPIO port.
Both boards have a COS indicator and the ability to hardware invert COS.
Boards are available now!
For full details and ordering information see -
https://hamvoip.org/ARA%20Release.pdf
Stay tuned for a radio-less node which will be released in the next
few weeks.
*73 Doug*
*WA3DSP*
*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
------------------------------
Message: 6
Date: Sun, 27 Jan 2019 03:28:20 +0000
From: Gervais Fillion <ve2ckn2 at hotmail.fr>
To: ARM Allstar <arm-allstar at hamvoip.org>
Subject: Re: [arm-allstar] email??
Message-ID:
<BN6PR2201MB12982A77961570966F39E33DCF950 at BN6PR2201MB1298.namprd22.prod.outlook.com>
Content-Type: text/plain; charset="iso-8859-1"
Well Bill,
the GM300 are rare around here (it could be a good alternative for me ) ,the interface for the GM300 is connected at a Raspberry PI 3 running AllStar? am i right?
i still have Tait TB7100 here that i dont used,,i must check the pinnout of her DB25 if i could connecter there one of these interface
gervais
________________________________
De : ARM-allstar <arm-allstar-bounces at hamvoip.org> de la part de "Bill Kittilson via ARM-allstar" <arm-allstar at hamvoip.org>
Envoy? : 26 janvier 2019 21:25
? : ARM Allstar
Cc : Bill Kittilson
Objet : Re: [arm-allstar] email??
These guys have nice stuff too.
http://www.repeater-builder.com/products/usb-rim-lite.html
> On Jan 26, 2019, at 8:29 PM, Douglas Goree via ARM-allstar <arm-allstar at hamvoip.org> wrote:
>
> Get a Uri want have to do anything but connect usb cable. When I sent mine
> to Russ-WL7LP and he tried to use my sound fob and to hard to get done
> right he got a Uri put on my node works good. The cost is not to high if
> you can spare I think it is about 60 or 70 dollars.
>
> On Sat, Jan 26, 2019 at 8:20 AM "Gervais Fillion via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
>> hi all member,
>> i sent some emails in the group and i dont see them,
>> is the email server working corectly?
>>
>> i need 2 modify soundcard for projects here,i try too weld mine and did
>> not go as plan!!!
>>
>> any chance i could find 2 in canada ( because of the shipping cost)
>>
>>
>> 73
>> gervais
>> ve2ckn
>>
>> _______________________________________________
>>
>> ARM-allstar mailing list
>> ARM-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
_______________________________________________
ARM-allstar mailing list
ARM-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
Visit the BBB and RPi2/3 web page - http://hamvoip.org
------------------------------
Message: 7
Date: Sat, 26 Jan 2019 23:03:47 -0500
From: Chris <chood73 at yahoo.com>
To: ARM Allstar <arm-allstar at hamvoip.org>
Subject: Re: [arm-allstar] Announcing a New series of FOBS
Message-ID: <2CAFCAEC-7E64-4924-B89A-28418E6ADD14 at yahoo.com>
Content-Type: text/plain; charset=us-ascii
George is really getting after it!
That is awesome!
> On Jan 26, 2019, at 10:37 PM, Doug Crompton via ARM-allstar <arm-allstar at hamvoip.org> wrote:
>
> I am pleased to announce two new FOBS available now for Allstar
> interfacing. The ARA-1 and ARA-1+ are completely assembled USB to radio
> interface boards with cables. These are US made and use the latest CM119B
> chips. They are competitively priced.
>
> The ARA-1 is a small board with just the I/O for a radio - Audio in/out,
> COS, and PTT.
>
> The ARA-1+ Includes CTCSS for the radio port and a 6 bit GPIO port.
>
> Both boards have a COS indicator and the ability to hardware invert COS.
>
> Boards are available now!
>
> For full details and ordering information see -
> https://hamvoip.org/ARA%20Release.pdf
>
> Stay tuned for a radio-less node which will be released in the next
> few weeks.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
------------------------------
Subject: Digest Footer
_______________________________________________
ARM-allstar mailing list
ARM-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
------------------------------
End of ARM-allstar Digest, Vol 56, Issue 52
*******************************************
More information about the ARM-allstar
mailing list