[arm-allstar] no-cid message

[WB4BXO]

Here's what I have in mine and it works. I think your error is in the last line. Note that I have it as extension "1" to keep from having to dial the entire node number, but you can keep your node number instead.

Steve - WB4BXO

[myphone]
;Settings for Zoiper
exten => 1,1,answer() ;Change the node number on all these lines to your own node
exten => 1,n,Playback(rpt/node)
exten => 1,n,Playback(digits/4) ; change the playback digits to your node as well
exten => 1,n,Playback(digits/6)
exten => 1,n,Playback(digits/8)
exten => 1,n,Playback(digits/7)
exten => 1,n,Playback(digits/5)
exten => 1,n,Playback(rpt/connected)
exten => 1,n,rpt(46875|Pv|${CALLERID(name)}) ; Change both numbers here to your node



-----Original Message-----
>From: "\"ku6v via ARM-allstar\"" <arm-allstar at hamvoip.org>
>Sent: Jan 14, 2019 12:14 AM
>To: arm-allstar at hamvoip.org
>Cc: ku6v <ku6v at pacbell.net>
>Subject: [arm-allstar] no-cid message
>
>During a Zoiper connection I have been attempting to get rid of the "no-cid"
>message and changed to something else like my call sign. I have followed the
>email early thread with David. I cannot get it to work no matter what I
>change. Does anyone have Zoiper connections being made and the "no-cid"
>message removed? If so can I get a copy of the working stanzas needed to
>make this work. I changed (added) the last two lines David suggested in my
>Zoiper stanza. No avail there. Do I need something changed in
>iax.conf..iaxrpt? Could I possibly have a corrupted image? 
>
>Do I need some changes in my phone Zoiper setup?
>
> 
>
>73
>
>Don
>
>KU6V
>
> 
>
>_______________________________________________
>
>ARM-allstar mailing list
>ARM-allstar at hamvoip.org
>http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
>Visit the BBB and RPi2/3 web page - http://hamvoip.org