[arm-allstar] One of two USB URIs dropping off

[Randy Neals]

Certainly, you can suggest that.
Would have missed the under voltage issue tho. :-)


On Sat, Jan 12, 2019 at 3:21 PM "Tony Ross via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> Randy, may I suggest " dmesg | grep -i usb | less ".
>
> On 1/11/19 11:04 AM, "Randy Neals via ARM-allstar" wrote:
> > Thanks to both..
> >
> > Are you familiar with any Pi/Linux debug for power or  USB?
> >
> > Something I could send to a terminal or file to provide some clues?
> >
> > On Fri, Jan 11, 2019 at 12:34 PM "Doug Crompton via ARM-allstar" <
> > arm-allstar at hamvoip.org> wrote:
> >
> >> I would agree with that but he did say he tried a different supply.
> >>
> >>
> >> *73 Doug*
> >>
> >> *WA3DSP*
> >>
> >> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> >>
> >> On Fri, Jan 11, 2019 at 12:00 PM Justin Reed <celltech161 at gmail.com>
> >> wrote:
> >>
> >>> I’m going to take a stab and suggest that your Pi power supply is
> >>> under-sized for two fobs. You’ll need a minimum of 3000 mAh at 5.1 VDC.
> >> Any
> >>> time I see random issues with a Pi it’s power supply related 100% of
> the
> >>> time, every time.
> >>>
> >>> Sent from my iPhone
> >>>
> >>>> On Jan 11, 2019, at 10:40 AM, Doug Crompton via ARM-allstar <
> >>> arm-allstar at hamvoip.org> wrote:
> >>>> Randy,
> >>>>
> >>>>    I run very few if any Pi's here with more than one USB FOB so I
> have
> >>>> never experienced that but I know many others are using multiple
> ports.
> >>>> Have you tried a different Pi? What error messages are you getting in
> >> the
> >>>> client when this happens?
> >>>>
> >>>>
> >>>> *73 Doug*
> >>>>
> >>>> *WA3DSP*
> >>>>
> >>>> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> >>>>
> >>>> On Fri, Jan 11, 2019 at 10:08 AM "Randy Neals via ARM-allstar" <
> >>>> arm-allstar at hamvoip.org> wrote:
> >>>>
> >>>>> Hi All,
> >>>>>
> >>>>> I have a fresh HamVoip install on a RPi3.
> >>>>> I started with one node configured, then plugged in a second USB URI
> >> and
> >>>>> configured the second node.
> >>>>>
> >>>>> After about 15-20 minutes, one of the two USB URIs will stop working.
> >>>>> (It could be either one, not consistent) ie: Heartbeat led stops
> >>> blinking
> >>>>> on URI.
> >>>>>
> >>>>> I've tried a couple of different power supplies on the RPi.
> >>>>> Same results.
> >>>>>
> >>>>> I've verified my config files.
> >>>>> I'm using usb / usb1 as the reference names for each node.
> >>>>>
> >>>>> I've done the simpleusb-tune-menu and wrote the config.
> >>>>> Verified that the simple usb files have the USB hardware address.
> >>>>>
> >>>>> It feel like this is a USB subsystem issue in the Rpi/Linux.
> >>>>> Not really sure what I might do next to test/isolate.
> >>>>>
> >>>>> [root at VE3RTR etc]# lsusb
> >>>>>
> >>>>> Bus 001 Device 006: ID 18a5:0251 Verbatim, Ltd
> >>>>>
> >>>>> Bus 001 Device 005: ID 0d8c:013a C-Media Electronics, Inc.
> >>>>>
> >>>>> Bus 001 Device 004: ID 0d8c:013a C-Media Electronics, Inc.
> >>>>>
> >>>>> Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp.
> >>> SMSC9512/9514
> >>>>> Fast Ethernet Adapter
> >>>>>
> >>>>> Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. SMC9514
> >> Hub
> >>>>> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> >>>>>
> >>>>>
> >>>>> simpleusb_tune_usb.conf
> >>>>>
> >>>>> [usb]
> >>>>>
> >>>>> ; name=usb
> >>>>>
> >>>>> ; devicenum=1
> >>>>>
> >>>>> devstr=1-1.3:1.0
> >>>>>
> >>>>> rxmixerset=140
> >>>>>
> >>>>> txmixaset=290
> >>>>>
> >>>>> txmixbset=0
> >>>>>
> >>>>>
> >>>>> simpleusb_tune_usb1.conf
> >>>>>
> >>>>> [usb1]
> >>>>>
> >>>>> ; name=usb1
> >>>>>
> >>>>> ; devicenum=0
> >>>>>
> >>>>> devstr=1-1.2:1.0
> >>>>>
> >>>>> rxmixerset=140
> >>>>>
> >>>>> txmixaset=290
> >>>>>
> >>>>> txmixbset=0
> >>>>>
> >>>>> Thanks,
> >>>>> Randy W3RWN
> >>>>> _______________________________________________
> >>>>>
> >>>>> ARM-allstar mailing list
> >>>>> ARM-allstar at hamvoip.org
> >>>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>>>>
> >>>>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >>>>>
> >>>> _______________________________________________
> >>>>
> >>>> ARM-allstar mailing list
> >>>> ARM-allstar at hamvoip.org
> >>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>>>
> >>>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >> _______________________________________________
> >>
> >> ARM-allstar mailing list
> >> ARM-allstar at hamvoip.org
> >> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>
> >> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org