[arm-allstar] One of two USB URIs dropping off

Randy Neals randy at neals.ca
Fri Jan 11 14:04:06 EST 2019


Thanks to both..

Are you familiar with any Pi/Linux debug for power or  USB?

Something I could send to a terminal or file to provide some clues?

On Fri, Jan 11, 2019 at 12:34 PM "Doug Crompton via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> I would agree with that but he did say he tried a different supply.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
> On Fri, Jan 11, 2019 at 12:00 PM Justin Reed <celltech161 at gmail.com>
> wrote:
>
> > I’m going to take a stab and suggest that your Pi power supply is
> > under-sized for two fobs. You’ll need a minimum of 3000 mAh at 5.1 VDC.
> Any
> > time I see random issues with a Pi it’s power supply related 100% of the
> > time, every time.
> >
> > Sent from my iPhone
> >
> > > On Jan 11, 2019, at 10:40 AM, Doug Crompton via ARM-allstar <
> > arm-allstar at hamvoip.org> wrote:
> > >
> > > Randy,
> > >
> > >   I run very few if any Pi's here with more than one USB FOB so I have
> > > never experienced that but I know many others are using multiple ports.
> > > Have you tried a different Pi? What error messages are you getting in
> the
> > > client when this happens?
> > >
> > >
> > > *73 Doug*
> > >
> > > *WA3DSP*
> > >
> > > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> > >
> > > On Fri, Jan 11, 2019 at 10:08 AM "Randy Neals via ARM-allstar" <
> > > arm-allstar at hamvoip.org> wrote:
> > >
> > >> Hi All,
> > >>
> > >> I have a fresh HamVoip install on a RPi3.
> > >> I started with one node configured, then plugged in a second USB URI
> and
> > >> configured the second node.
> > >>
> > >> After about 15-20 minutes, one of the two USB URIs will stop working.
> > >> (It could be either one, not consistent) ie: Heartbeat led stops
> > blinking
> > >> on URI.
> > >>
> > >> I've tried a couple of different power supplies on the RPi.
> > >> Same results.
> > >>
> > >> I've verified my config files.
> > >> I'm using usb / usb1 as the reference names for each node.
> > >>
> > >> I've done the simpleusb-tune-menu and wrote the config.
> > >> Verified that the simple usb files have the USB hardware address.
> > >>
> > >> It feel like this is a USB subsystem issue in the Rpi/Linux.
> > >> Not really sure what I might do next to test/isolate.
> > >>
> > >> [root at VE3RTR etc]# lsusb
> > >>
> > >> Bus 001 Device 006: ID 18a5:0251 Verbatim, Ltd
> > >>
> > >> Bus 001 Device 005: ID 0d8c:013a C-Media Electronics, Inc.
> > >>
> > >> Bus 001 Device 004: ID 0d8c:013a C-Media Electronics, Inc.
> > >>
> > >> Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp.
> > SMSC9512/9514
> > >> Fast Ethernet Adapter
> > >>
> > >> Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. SMC9514
> Hub
> > >>
> > >> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> > >>
> > >>
> > >> simpleusb_tune_usb.conf
> > >>
> > >> [usb]
> > >>
> > >> ; name=usb
> > >>
> > >> ; devicenum=1
> > >>
> > >> devstr=1-1.3:1.0
> > >>
> > >> rxmixerset=140
> > >>
> > >> txmixaset=290
> > >>
> > >> txmixbset=0
> > >>
> > >>
> > >> simpleusb_tune_usb1.conf
> > >>
> > >> [usb1]
> > >>
> > >> ; name=usb1
> > >>
> > >> ; devicenum=0
> > >>
> > >> devstr=1-1.2:1.0
> > >>
> > >> rxmixerset=140
> > >>
> > >> txmixaset=290
> > >>
> > >> txmixbset=0
> > >>
> > >> Thanks,
> > >> Randy W3RWN
> > >> _______________________________________________
> > >>
> > >> ARM-allstar mailing list
> > >> ARM-allstar at hamvoip.org
> > >> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >>
> > >> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > >>
> > > _______________________________________________
> > >
> > > ARM-allstar mailing list
> > > ARM-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org

-- 
Sent from mobile.


More information about the ARM-allstar mailing list