[arm-allstar] Script to update Arcom RC210 Time and Date

[Wayne]

Aloha Chris,

yes your blog has been helpful :)

On Fri, Jan 4, 2019 at 1:04 PM "Chris via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> Ha! Thanks for the mention!
> Glad it was useful to someone.
>
> Chris
> WB4ULK
>
> > On Jan 4, 2019, at 5:47 PM, LaRoy McCann via ARM-allstar <
> arm-allstar at hamvoip.org> wrote:
> >
> > I sent it as an attachment, I guess those get stripped.
> > I will send it to you a little later.
> >
> >
> > On Fri, Jan 4, 2019 at 4:38 PM "Doug Crompton via ARM-allstar" <
> > arm-allstar at hamvoip.org> wrote:
> >
> >> LaRoy,
> >>
> >>  If you intended to attach a script it did not go through. If you send
> it
> >> to me personally I can add it to the web page.
> >>
> >> Doug
> >>
> >> On Fri, Jan 4, 2019 at 4:57 PM "LaRoy McCann via ARM-allstar" <
> >> arm-allstar at hamvoip.org> wrote:
> >>
> >>> To all
> >>>
> >>> I have written a script for a local club to have Hamvoip automatically
> >>> update the date and time on their Arcom RC210 controller.
> >>>
> >>> I originally added the Raspberry PI Hamvoip controller to give them
> >>> Echolink capabilities on their Arcom contoller.  I noticed they were
> >> having
> >>> problems keeping the date and time set on the Arcom so I offered to
> help
> >>> them with that as well.  The attached script is what I came up with to
> >> make
> >>> this work.
> >>>
> >>> The script will get the local time from the Pi, format it and create
> the
> >>> command to feed it to the Arcom using the Asterisk Cop 48 command.
> >>>
> >>> It is run as /etc/asterisk/local/set_arcom_clock.sh 1|2 <node>.
> >>> Option 1 will set the date and time on the Arcom.
> >>> Option 2 will run a macro they have programmed that announces the date
> >> and
> >>> time.
> >>> <node> Is optional.  If blank it will use the first node configured in
> >>> rpt.conf.
> >>> Other options could easily be added to the script to perform other
> >>> functions on the Arcom.
> >>>
> >>> I also configured crontab to run this each morning at 3:00am.
> >>>
> >>>
> >>> I would like to give credit to this article that led me to the COP 48
> >>> command.
> >>>
> >>>
> >>>
> >>
> http://www.chrishoodblog.com/pass-dtmf-through-allstar-to-rc-210-repeater-controller/
> >>>
> >>> I hope this might be helpful to someone else.
> >>>
> >>> 73's
> >>> LaRoy McCan - K5TW
> >>> _______________________________________________
> >>>
> >>> ARM-allstar mailing list
> >>> ARM-allstar at hamvoip.org
> >>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>>
> >>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >>>
> >> _______________________________________________
> >>
> >> ARM-allstar mailing list
> >> ARM-allstar at hamvoip.org
> >> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>
> >> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >>
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>


-- 
Aloha
Wayne

"*Don't mistake silence for weakness.  Smart people don't plan big moves
out loud*."