[arm-allstar] Problem booting RPi image

[Les Barker]

Hi Steve, thanks for reply.

I am using the Win32 Disk imager, which I have used many times in the past.

Regards
Les



-----Original Message-----
From: ARM-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of "Steve Agee via ARM-allstar"
Sent: 25 February 2019 02:03 PM
To: arm-allstar at hamvoip.org
Cc: Steve Agee
Subject: Re: [arm-allstar] Problem booting RPi image

*What process are you using to write the image to the micro SD card? It 
sounds like perhaps you are trying to drag and drop the image, which 
will not work. You must save the image as a special Disk Image File type 
(.iso) and I personally use an app called DiskImager when using a 
Windows machine to do this. Please carefully read and follow the 
instructions posted at:
  <https://hamvoip.org/#image>

N5ZUA
*
On 2/25/2019 4:10 AM, "Les Barker via ARM-allstar" wrote:
> Good day.
>
>   
>
> I am new to Allstar and I was recommended to use the Hamvoip image, the
> latest being RPi2-3_V1.5rc50.
>
>   
>
> I have downloaded the image twice both as xz file and exe file. I have tried
> 2 different 16Gb SD cards and an RPi 2 and 3.
>
>   
>
> The image will not boot. All that displays on the HDMI monitor is the square
> multicoloured Pi boot screen and nothing else.
>
>   
>
> Any suggestion? Please!! Before I give up.
>
>   
>
> 73
>
> Les
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org

_______________________________________________

ARM-allstar mailing list
ARM-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org