[arm-allstar] Repeater Bounce

[ddhcpracing]

Doug,Yes, it at nounkey=1, and duplex=0, I understand boot. I was saying I tried everything. Is there a way for Allstar not to listen after it unkeys the link radio for 5 seconds?Thanks KG5RDF
-------- Original message --------From: Doug Crompton via ARM-allstar <arm-allstar at hamvoip.org> Date: 2/23/19  10:25 AM  (GMT-06:00) To: ARM Allstar <arm-allstar at hamvoip.org> Cc: Doug Crompton <wa3dsp at gmail.com> Subject: Re: [arm-allstar] Repeater Bounce You need to figure out why it is ping/ponging. The usual reason in asituation like this is that the repeater end drops and the Allstar endresponds back automatically and this continues on and on.  The Allstar endresponding back is usually always the courtesy tone. You need to turn thatoff -nounkeyct=1in rpt.conf.  The thing I don't understand is that duplex=0 should also dothis but is overkill in many cases as it turns off ALL telemetry.Setting rxondelay or hangtime to high numbers is not a good idea. Bothwould really screw up the way it would be intended to work. You need to putthings back to default values. Only use either duplex=0 or the nounkeyct=1to start with and remember whenever you change any of these things you needto restart asterisk (astres.sh) for it to actually change.  With eitherduplex=0 or nounkeyct=1  Allstar should not respond back after receiving atransmission unless it is actually a real person coming back from aconnection to that node.*73 Doug**WA3DSP**http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*On Sat, Feb 23, 2019 at 11:10 AM "ddhcpracing via ARM-allstar" <arm-allstar at hamvoip.org> wrote:> We have a RF hub failure. I have used Allstar to bring East and West bound> 24 repeater sites up in the meantime. I have one repeater I still need to> connect, to have full coverage in DFW. This site is being linked via rf to> a link radio v71 to Allstar.The issue is repeater bounce/pingpong. I need a> way for Allstar not to listen to the RF link for 5 seconds after it unkeys> the repeater.Tried two different nodes, hangtime 0-50000, Duplex 0,1,2,3,> and 4, and rxaudiodelay 0-26. Is there a variable I am missing to> accomplish this? Repeater site is not accessible and is dr1x. Done this> many times with no issue, but it's a vary far rf putt this time.Thanks> KG5RDF> _______________________________________________>> ARM-allstar mailing list> ARM-allstar at hamvoip.org> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar>> Visit the BBB and RPi2/3 web page - http://hamvoip.org_______________________________________________ARM-allstar mailing listARM-allstar at hamvoip.orghttp://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstarVisit the BBB and RPi2/3 web page - http://hamvoip.org