[arm-allstar] Supermon 6.1+

[Doug Crompton]

Jerry,

Those two lines need to go in the stanza where your node number is defined.
Where you put them is where node routing is defined.  It is under misc
settings. The example lines are already in there commented out. You can
either uncomment and change those lines or add them after.

; Misc. settings
;connpgm=yourconnectprogram
                      ; Program or script to run at connection
;discpgm=yourdisconnectprogram
                      ; Program or script to run at disconnection


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Wed, Feb 13, 2019 at 9:12 AM "Jerry Swords via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> I added this to my rpt.conf file under nodes and the connection log is
> still not working what have I done wrong again?
>
> ; Define local nodes
>
> [nodes]
> ; Note, if you are using automatic updates for allstar link nodes,
> ; no allstar link nodes should be defined here. Only place a definition
> ; for your local (within your LAN) nodes, and private (off of allstar
> ; link) nodes here.
>
> 49390 = radio at 127.0.0.1/49390,NONE
> connpgm=/usr/local/sbin/supermon/smlogger 1
> discpgm=/usr/local/sbin/supermon/smlogger 0
> 49565 = radio at 127.0.0.1/49565,NONE
> connpgm=/usr/local/sbin/supermon/smlogger 1
> discpgm=/usr/local/sbin/supermon/smlogger 0
>
>
> __________________________________
> Sent from eM Client | www.emclient.com <http://www.emclient.com/get>
>
> ------ Original Message ------
> From: "Bryan St Clair via ARM-allstar" <arm-allstar at hamvoip.org>
> To: "ARM Allstar" <arm-allstar at hamvoip.org>
> Cc: "Bryan St Clair" <bryan at k6cbr.us>
> Sent: 2/13/2019 1:55:12 AM
> Subject: Re: [arm-allstar] Supermon 6.1+
>
> Supermon how to setup guide, page 6. Logging Configuration.
>
> https://hamvoip.org/supermon_howto.pdf
>
> On Tue, Feb 12, 2019 at 10:53 PM "Jerry Swords via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> I am really new to Allstar so what I was wondering under the tab on
> Supermon 6.1+ Connection Log I have never seen no logs under that tab, do I
> need to do something to activate that logging?
>
>
>
> __________________________________
> Sent from eM Client | www.emclient.com<http://www.emclient.com/get>
>
>
> [https://ipmcdn.avast.com/images/icons/icon-envelope-tick-green-avg-v1.png
> ]<
>
> http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient
> >
> Virus-free. www.avg.com<
>
> http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient
> >
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>
>
> --
> Bryan
> K6CBR
> bryan at k6cbr.us
> Allstar Base: 43918, 43991
> Allstar Hubs: 43919, 47036, 47061(Testing)
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
> [https://ipmcdn.avast.com/images/icons/icon-envelope-tick-green-avg-v1.png
> ]<
> http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
> Virus-free. www.avg.com<
> http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient
> >
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>