[arm-allstar] Node Registration Timeout

[Adam P.N. Leask]

Good afternoon,

Local ISP had data center outage yesterday after a small power bump.

Since then my node wont connect anywhere, says (in voice OTA) connection
failed

Went to ASTERISK CLI client run iax2 show registry and get (below)

KC7NKP-48742*CLI> iax2 show registry
Host                  dnsmgr  Username               Perceived
 Refresh  State
44.98.254.145:4569    Y       48742                  <Unregistered>
     60  Request Sent
KC7NKP-48742*CLI>

Sometimes it says *request sent* sometimes it says *Timeout*

*I did try to reload iax2 also.*


I went to the iax.conf file and verified that my register file was in there
and pw matched what was on allstar site

register => 48742:xxxxxxxxxx at register.allstarlink.org

(whereas xxxxxxxxxxx is the matching password)

I went to Bash Shell Interface and ran these pings succesfully


[root at KC7NKP-48742 asterisk]# ping 44.98.254.145
PING 44.98.254.145 (44.98.254.145) 56(84) bytes of data.
64 bytes from 44.98.254.145: icmp_seq=1 ttl=57 time=80.7 ms
64 bytes from 44.98.254.145: icmp_seq=2 ttl=57 time=77.3 ms
64 bytes from 44.98.254.145: icmp_seq=3 ttl=57 time=76.6 ms
^C
--- 44.98.254.145 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2002ms
rtt min/avg/max/mdev = 76.654/78.261/80.799/1.843 ms
[root at KC7NKP-48742 asterisk]# ping register.allstarlink.org
PING register.regsvcs.allstarlink.org (44.98.254.145) 56(84) bytes of data.
64 bytes from register-tpa.allstarlink.org (44.98.254.145): icmp_seq=1
ttl=57 time=80.3 ms
64 bytes from register-tpa.allstarlink.org (44.98.254.145): icmp_seq=2
ttl=57 time=79.7 ms
64 bytes from register-tpa.allstarlink.org (44.98.254.145): icmp_seq=3
ttl=57 time=80.2 ms
^C
--- register.regsvcs.allstarlink.org ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2001ms
rtt min/avg/max/mdev = 79.716/80.118/80.378/0.436 ms



What should I try now?

Adam P.N. Leask, KC7NKP