[arm-allstar] Remote NODE

[Luc Drolet VE2LUQ]

Good night, Doug.

OK, I'll make myself better understood with this file attached PDF

My main Node is 1400 ve2luq.com
And I'm mobile on a 1410 NODE with my car
And I want to connect a repeater to Richboro fires the NODE 1800 for example.
Is there a method I can do my connection because I'm not on the main node so this node has the function in RPT. conf

I can't do * 31800 because I'm not on the main node, I'm on a secondary node of my main node.

Is there a connection method?

Thank you for your help

73’s
Luc






> Le 5 févr. 2019 à 02:51, Doug Crompton via ARM-allstar <arm-allstar at hamvoip.org> a écrit :
> 
> Luc,
> 
> I am really not understanding your explanation. But I gather what you want
> to be able to do is connect private nodes.  Private nodes need to be
> manually routed. Any node can connect to any other node if BOTH ends have
> the proper port and IP address info for the other node. In your situation
> using private nodes you must put the address information in manually in the
> [nodes] stanza of rpt.conf. Every route to every other server needs to be
> in that stanza if you want a connection between them. This includes the
> port. There is a howto on this at hamvoip.
> 
> 
> *73 Doug*
> 
> *WA3DSP*
> 
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> 
> 
> On Mon, Feb 4, 2019 at 8:16 PM "Luc Drolet VE2LUQ via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
> 
>> Hello to you,
>> 
>> Is it possible to make remote NODE, I explain
>> 
>> I have my main node 1400 that it all the info from the external repeaters
>> are in its RPT. conf of node 1400
>> 
>> So if I'm on one of its nodes is it possible to make a connection to other
>> repeaters, for example connection to node 1800 and that the info of node
>> 1800 is only in the RPT. conf of 1400 and I am on a node that is already in
>> connection with the node 1400 by Example NODE 1410 and I want to connect
>> 1800
>> 
>> If I would be on the node 1400 I would * 31800 but because I am on node
>> 1410 I can not do this with my microphone in DTMF
>> 
>> Is there a solution?
>> 
>> Thank you and good evening
>> 
>> 73’s
>> Luc
>> VE2LUQ
>> 
>> 
>> _______________________________________________
>> 
>> ARM-allstar mailing list
>> ARM-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>> 
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3 web page - http://hamvoip.org