[arm-allstar] IRLP Not Connecting to Reflectors and Favorites Redirect to EchoLink Node Numbers

[Angelo Glorioso]

Doug,

 You are correct. The only thing needed is the IRLP Key file. Everything else is setup within the Hamvoip.
If you copy anything other than that, I am not sure how Hamvoip will respond.




73
Angelo  / N5UXT
IRLP 8015
Allstar 29713, 39734
Echolink 838977

---------------------------------------------------------
If you don't ask, you will never know!!

________________________________
From: ARM-allstar <arm-allstar-bounces at hamvoip.org> on behalf of "Doug Crompton via ARM-allstar" <arm-allstar at hamvoip.org>
Sent: Tuesday, December 31, 2019 1:33 AM
To: ARM Allstar <arm-allstar at hamvoip.org>
Cc: Doug Crompton <wa3dsp at gmail.com>
Subject: Re: [arm-allstar] IRLP Not Connecting to Reflectors and Favorites Redirect to EchoLink Node Numbers

Gerald,

 I am not an IRLP expert but I discussed this with Dave and I am looking
for Paul, KN2R's possible response. One issue that you need to be aware of
is that the ONLY thing you should ever copy from your original IRLP system
is the keys. No other files should be copied. It appears others have made
this mistake copying files over that caused downloads from IRLP that
clobbered our files and it causes general havoc. Based on your problems I
think the best thing would be for you to preserve your IRLP key file and
start over with a new install - download Hamvoip image, update, setup, and
reinstall IRLP. It is possible that things could be fixed without doing all
that but it would involve some work and not knowing what you have done
would make it hard. IRLP does work and there is no logical reason nor
changes in the code that would have caused what you are describing with the
stock Hamvoip IRLP code.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Mon, Dec 30, 2019 at 12:49 AM "Gerald L. Dubzak, Jr. - W2GLD via
ARM-allstar" <arm-allstar at hamvoip.org> wrote:

> Looking for some guidance here on an issue that was was also reported back
> in October on the list; however, there has been no update as to a fix in
> that post so I'm asking again.
>
>
> I do not use IRLP on a regular basis; however, I've recently noticed that
> I cannot connect to ANY reflectors other than 89999; same situation as
> someone else reported in October.  The node was fully operational and not
> port changes have taken place, I verified that several times.  Swapping
> with a known good "real IRLP node", there is no issue.
>
>
> When I look at the IRLP log, this is what is shown:
>
>
> File: /home/irlp/log/messages
> -----------------------------------------------------------------
> Sun Dec 29 14:46:52 EST 2019 [update:hosts] Gzipped file was unavailable,
> downloading hosts.update direct.
> Sun Dec 29 14:46:52 EST 2019 [update:hosts] ERROR: Hosts file seems
> invalid.
> Sun Dec 29 14:46:52 EST 2019 [update:hosts] Update completed.
> Sun Dec 29 14:46:52 EST 2019 [statupdate] WARNING - Check Network services!
> Sun Dec 29 14:46:54 EST 2019 [update:files] Update completed.
> Sun Dec 29 14:46:56 EST 2019 [irlp_fullreset] Full Reset completed.
> Sun Dec 29 14:46:57 EST 2019 [irlp_fullreset] Full Reset completed.
> Sun Dec 29 14:50:58 EST 2019 [irlp_fullreset] Full Reset completed.
> Sun Dec 29 14:50:58 EST 2019 [irlp_fullreset] Full Reset completed.
> Sun Dec 29 15:10:38 EST 2019 [irlp_fullreset] Full Reset completed.
> Sun Dec 29 15:10:39 EST 2019 [irlp_fullreset] Full Reset completed.
> Sun Dec 29 15:12:21 EST 2019 [irlp_fullreset] Full Reset completed.
> Sun Dec 29 15:12:22 EST 2019 [irlp_fullreset] Full Reset completed.
> Sun Dec 29 15:13:04 EST 2019 [irlp_fullreset] Full Reset completed.
> Sun Dec 29 15:13:05 EST 2019 [irlp_fullreset] Full Reset completed.
> Sun Dec 29 15:15:48 EST 2019 [irlp_fullreset] Full Reset completed.
> Sun Dec 29 15:15:49 EST 2019 [irlp_fullreset] Full Reset completed.
> Sun Dec 29 15:18:08 EST 2019 [irlp_fullreset] Full Reset completed.
> Sun Dec 29 15:18:08 EST 2019 [irlp_fullreset] Full Reset completed.
> Sun Dec 29 15:19:12 EST 2019 [irlp_fullreset] Full Reset completed.
> Sun Dec 29 15:19:13 EST 2019 [irlp_fullreset] Full Reset completed.
> Sun Dec 29 15:21:20 EST 2019 [irlp_fullreset] Full Reset completed.
> Sun Dec 29 15:21:21 EST 2019 [irlp_fullreset] Full Reset completed.
> Sun Dec 29 16:03:01 EST 2019 [loadcalls]: Too soon to retrieve IRLP node
> info, aborting.
> Mon Dec 30 00:03:01 EST 2019 [loadcalls] Reload of updated IRLP callsigns
> completed.
>
> Additionally, the IRLP favorites I have programmed for REF9250, REF9100,
> REF9050, etc now seem to redirect to EchoLink nodes in the favorites list
> as well.  For example, when I have a favorite for REF9999 and send the
> command as 89999 from the favorites list, it calls the SCARS EchoLInk
> reflector instead.  This seems to be related to recent updates between
> October and now, but I need some guidance of where else to look at this
> point.
>
> Happy New Year and thanks for the help and/or guidance.
>
> 73, Jerry W2GLD
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
_______________________________________________

ARM-allstar mailing list
ARM-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3/4 web page - http://hamvoip.org