[arm-allstar] Frequency Agil allstar node questions

[Doug Crompton]

Jeffrey,

 Refer to -

https://sourceforge.net/p/hamlib/mailman/message/36368658/

https://sourceforge.net/p/hamlib/mailman/message/36203135/

about hamlib control of the TM-V71A.

As far as scripts are concerned the autopatch control howto at hamvoip.org
is a start. You basically capture DTMF and convert it to commands in a
script to send to hamlib (rigctl) to control the radio. I believe in the
case of the TM-V71A you would select memories. Probably if you want more
complete control you could select a different radio. I suspect there are
some out there who have written general scripts for hamlib as the basic
commands are the same for any radio. Hamlib converts its commands to those
the radio requires. The same script would work for just about any radio as
long as the hamlib command given was mapped to the radio.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Mon, Dec 30, 2019 at 7:31 PM "Jeff Jurenka via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> Dose anyone have notes or better yet sample *.conf files a frequency agil
> allstar node?
>
> I got a Kenwood TM-V71a and a URIxb that i would like to build an allstar
> node with and i am feeling overwhelmed (read as LAZY) with the hamlib
> configurations.
>
> Thank you in advance.
>
> Jeffrey
> KD6GDB
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>