[arm-allstar] Cannot connect via DV Switch after IP Change

[Doug Crompton]

Are you sure your port is correct? It shows as 1050???  What is the
bindport in your iax.conf file? The bindport and port in the Hamvoip
registration and your port forward should all be the same?

This shows you are registering with Hamvoip but not Allstar. They have been
having problems. This means that anyone from another registered Hamvoip
node should be able to connect to you assuming your port is correct. If
they are Allstar probably not. We have no control over Allstar registry. If
you have another Hamvoip node that you are trying to connect that does not
have a Hamvoip registration let us know the node number and we will get you
one.

If you iax port is not 4569 and you want it to be different make sure you
change it at allstarlink.org, in bindport in iax.conf and in the hamvoip
registration in iax.conf


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*



On Sat, Dec 28, 2019 at 10:08 PM "Philip Ross via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> My node is: 45306
> Here is what I get when I run check_reg.sh
>
> #/etc/asterisk>check_reg.sh
>
> Node - 45306#4569 at IP address- 68.43.232.243, Port- 1050 is "Registered"
> at Server
> IP- 74.91.126.182 (hvdallas2.hamvoip.org.), Port- 4569
>
>  DNS lookup returns - +OK|radio at 68.43.232.243:4569/45306,68.43.232.243
>
> Node - 45306 at IP address- 68.43.232.243, Port- 1050 is "Request Sent" at
> Server
> IP- 216.244.83.154 (register-sea.ptr.allstarlink.org.), Port- 4569
>
>  DNS lookup returns - +OK|radio at 68.43.232.243:4569/45306,68.43.232.243
>
> -----Original Message-----
> From: ARM-allstar <arm-allstar-bounces at hamvoip.org> On Behalf Of "Doug
> Crompton via ARM-allstar"
> Sent: Saturday, December 28, 2019 9:48 PM
> To: ARM Allstar <arm-allstar at hamvoip.org>
> Cc: Doug Crompton <wa3dsp at gmail.com>
> Subject: Re: [arm-allstar] Cannot connect via DV Switch after IP Change
>
> Philip,
>
> It may be that you are not registering. Have you run check_reg.sh  - is it
> showing registered?  Are outgoing connects working? What is your node
> number?
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
> On Sat, Dec 28, 2019 at 6:05 PM "Philip Ross via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > I have the All-Star node that is normally connected to my repeater at
> > my home for some maintenance.
> >
> > I cannot connect to it via DV switch or another node.
> >
> > I changed the IP address of the PI to the new internal address of my
> > LAN and set up port forwarding of Port 4569 to that address.
> >
> > What am I missing?
> >
> > Thanks.
> >
> >
> >
> >
> >
> > Philip Ross, AB8PR
> >
> > philross1 at gmail.com <mailto:philross1 at gmail.com>
> >
> >
> >
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> >
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>