[arm-allstar] RIM-Lite/RC210 Users

[larry]

Jay, I have to disagree with you about the RC-210 having bad audio.

We run a bunch of Arcom Controllers around our area with Allstar, IRLP 
and link radios connected to them. The audio quality is an exact copy of 
what you feed it when it's setup correctly.  If you have bad audio on 
it's output you either have the Arcom configured/adjusted wrong or your 
incoming feed is bad to begin with.

Larry - N7FM


On 8/21/19 4:49 AM, "jay via ARM-allstar" wrote:
> Its not the rim lite... its the 210.. The audio on those controllers is just bad.Sent from my droid phone.
> -------- Original message --------From: Mike Sullivan via ARM-allstar <arm-allstar at hamvoip.org> Date: 8/20/19  23:06  (GMT-06:00) To: ARM Allstar <arm-allstar at hamvoip.org> Cc: Mike Sullivan <kn4imu at gmail.com> Subject: [arm-allstar] RIM-Lite/RC210 Users Looking for some input on others that are using the RC210 with a RIM-Liteinterface. I've deployed 2 so far, one at my club's tower and another foranother club, which is currently in a testing phase. However, I feel likethe audio used for Allstar have a very mid-heavy sound, even when emphasissettings are set on the controller and node. I'm looking to see if it'smaybe a change of codec needed, or if there's a setting somewhere I cantweak, or if anyone has found a "magic" number to change the EQ on theaudio being passed through. I don't seem to notice it as much with Echolink.Mike_______________________________________________ARM-allstar mailing listARM-allstar at hamvoip.orghttp://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstarVisit
>    the BBB and RPi2/3 web page - http://hamvoip.org
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>