[arm-allstar] ARM-allstar Digest, Vol 63, Issue 16

Doug Crompton wa3dsp at gmail.com
Wed Aug 7 22:11:14 EDT 2019 

xxxxx = radio at 127.0.0.1/27225,NONE

Where xxxxx is the node number you want to not be able to connect to.  This
is in the [nodes] stanza towards the bottom of rpt.conf.  Note this will
preclude ANYONE from connecting to that node from this server. This node
will also not be able to connect inbound.

Node lookup looks here first then to dns lookup. If it finds the node here
it uses the associated address. Since 127.0.0.1 is this server and
obviously the node is not here it will fails silently.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Wed, Aug 7, 2019 at 10:05 PM "Steve Liggett via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> Will you give me an example of the syntax?
>
> > On Aug 7, 2019, at 12:10 AM, arm-allstar-request at hamvoip.org wrote:
> >
> > Send ARM-allstar mailing list submissions to
> >       arm-allstar at hamvoip.org
> >
> > To subscribe or unsubscribe via the World Wide Web, visit
> >       http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > or, via email, send a message with subject or body 'help' to
> >       arm-allstar-request at hamvoip.org
> >
> > You can reach the person managing the list at
> >       arm-allstar-owner at hamvoip.org
> >
> > When replying, please edit your Subject line so it is more specific
> > than "Re: Contents of ARM-allstar digest..."
> >
> >
> > Today's Topics:
> >
> >   1. Re: ARM-allstar Digest, Vol 63, Issue 14 (Doug Crompton)
> >   2. Re: TK8180 FOB interfacing (Ed Wilhelm)
> >   3. Re: ARM-allstar Digest, Vol 63, Issue 15 (Steve Liggett)
> >
> >
> > ----------------------------------------------------------------------
> >
> > Message: 1
> > Date: Tue, 6 Aug 2019 23:30:35 -0400
> > From: Doug Crompton <wa3dsp at gmail.com>
> > To: ARM Allstar <arm-allstar at hamvoip.org>
> > Subject: Re: [arm-allstar] ARM-allstar Digest, Vol 63, Issue 14
> > Message-ID:
> >       <CAMp6vsvJ0dLy=PsKQ=
> rGZFmFRJxZ89Chg3ev5LaxNcu22qAysA at mail.gmail.com>
> > Content-Type: text/plain; charset="UTF-8"
> >
> > Yes, I went back and read it. Yes that would work. It would deny anyone
> > from connecting to that node directly from his. This would also have the
> > effect of not allowing that node to connect incoming which I suspect is
> > what you would want. However that doesn't stop someone from outside from
> > connecting and then also connecting to that node. There are always ways
> > around it.
> >
> >
> > *73 Doug*
> >
> > *WA3DSP*
> >
> > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> >
> >
> > On Tue, Aug 6, 2019 at 11:25 PM "Danny Siminiuk via ARM-allstar" <
> > arm-allstar at hamvoip.org> wrote:
> >
> >> I didn't see where he asked that only a specific RF user to be blocked
> >> from connecting to node X.
> >>
> >> Chris has a good idea though. Define node X as a local node and set the
> IP
> >> address to 127.0.0.1 on a UDP port that is not open or available. Node X
> >> will never connect.
> >>
> >> Danny
> >> K5CG
> >>
> >> ----- Original Message -----
> >> From: "ARM Allstar" <arm-allstar at hamvoip.org>
> >> To: "ARM Allstar" <arm-allstar at hamvoip.org>
> >> Cc: "wa3dsp" <wa3dsp at gmail.com>
> >> Sent: Tuesday, August 6, 2019 9:34:44 PM
> >> Subject: Re: [arm-allstar] ARM-allstar Digest, Vol 63, Issue 14
> >>
> >> But he I believe he just wants to block one person from doing that not
> >> everyone. How about telling the person not to connect to that node and
> if
> >> they don't comply ban them. That is what I would do. Is this a guy who
> >> comes in on RF on your repeater? In that case there is really nothing
> you
> >> can do. There is no way to know who it is. You could change the connect
> >> commands (and others) and only share it then with authorized users but
> >> anyone can listen on the air and mimic the tones.
> >>
> >> BTW there is a guy on your repeater W3YT who just about every night
> tries
> >> to connect somewhere and we hear his tones which means they are not
> >> working. He never gives up we finally have to tell him it is not going
> to
> >> work!
> >>
> >>
> >> *73 Doug*
> >>
> >> *WA3DSP*
> >>
> >> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> >>
> >>
> >> On Tue, Aug 6, 2019 at 10:25 PM "Chris via ARM-allstar" <
> >> arm-allstar at hamvoip.org> wrote:
> >>
> >>> What about defining the node at the bottom of the rpt.conf but give it
> a
> >>> bogus IP address. If anyone tried to connect to that node, rpt would
> call
> >>> on a bad address and just not do anything.
> >>>
> >>> Would that work?
> >>>
> >>> Chris
> >>> WB4ULK
> >>>
> >>>> On Aug 6, 2019, at 6:31 PM, Steve Liggett via ARM-allstar <
> >>> arm-allstar at hamvoip.org> wrote:
> >>>>
> >>>> Doug:
> >>>>
> >>>> "I would like to call a script that will prohibit local users from
> >>> connecting to a certain node.?
> >>>>
> >>>> The node-ban-allow blocks a distant node from connecting to me
> >> (incoming
> >>> block), correct? I want to not allow a LOCAL user of the repeater/node
> >> from
> >>> connecting to a certain distant node. So, the aim is to restrict an
> >>> outbound-originated connection.
> >>>>
> >>>> steve
> >>>> W3RX
> >>>>
> >>>>
> >>>>
> >>>>> On Aug 6, 2019, at 7:26 PM, arm-allstar-request at hamvoip.org wrote:
> >>>>>
> >>>>> Send ARM-allstar mailing list submissions to
> >>>>>   arm-allstar at hamvoip.org
> >>>>>
> >>>>> To subscribe or unsubscribe via the World Wide Web, visit
> >>>>>   http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>>>> or, via email, send a message with subject or body 'help' to
> >>>>>   arm-allstar-request at hamvoip.org
> >>>>>
> >>>>> You can reach the person managing the list at
> >>>>>   arm-allstar-owner at hamvoip.org
> >>>>>
> >>>>> When replying, please edit your Subject line so it is more specific
> >>>>> than "Re: Contents of ARM-allstar digest..."
> >>>>>
> >>>>>
> >>>>> Today's Topics:
> >>>>>
> >>>>> 1. Prohibit connection (Steve Liggett)
> >>>>> 2. Re: Prohibit connection (Doug Crompton)
> >>>>> 3. TK8180 FOB interfacing (Doug Crompton)
> >>>>>
> >>>>>
> >>>>>
> ----------------------------------------------------------------------
> >>>>>
> >>>>> Message: 1
> >>>>> Date: Tue, 6 Aug 2019 12:12:26 -0400
> >>>>> From: Steve Liggett <sbliggett2 at gmail.com>
> >>>>> To: arm-allstar at hamvoip.org
> >>>>> Subject: [arm-allstar] Prohibit connection
> >>>>> Message-ID: <0FC40B0F-6032-4729-939F-D4487E8E480F at gmail.com>
> >>>>> Content-Type: text/plain;    charset=us-ascii
> >>>>>
> >>>>> I would like to call a script that will prohibit local users from
> >>> connecting to a certain node. I do not believe that this is currently a
> >>> feature, is it?
> >>>>>
> >>>>> steve
> >>>>> W3RX
> >>>>>
> >>>>> ------------------------------
> >>>>>
> >>>>> Message: 2
> >>>>> Date: Tue, 6 Aug 2019 12:51:00 -0400
> >>>>> From: Doug Crompton <wa3dsp at gmail.com>
> >>>>> To: ARM Allstar <arm-allstar at hamvoip.org>
> >>>>> Subject: Re: [arm-allstar] Prohibit connection
> >>>>> Message-ID:
> >>>>>   <
> >> CAMp6vssKPzuiVEXj43RTqELDU3bSNvgG6x+TFWELjY2s3pHuug at mail.gmail.com>
> >>>>> Content-Type: text/plain; charset="UTF-8"
> >>>>>
> >>>>> Steve,
> >>>>>
> >>>>> Not sure exactly what you want but there is a node ban (or allow) in
> >>>>> Supermon called restrict and also a stand-alone script
> >>> node-ban-allow.sh
> >>>>> which would ban a node from connecting.. What is it exactly you want
> >> to
> >>> do?
> >>>>>
> >>>>>
> >>>>> *73 Doug*
> >>>>>
> >>>>> *WA3DSP*
> >>>>>
> >>>>> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio
> >*
> >>>>>
> >>>>>
> >>>>>
> >>>>> On Tue, Aug 6, 2019 at 12:47 PM "Steve Liggett via ARM-allstar" <
> >>>>> arm-allstar at hamvoip.org> wrote:
> >>>>>
> >>>>>> I would like to call a script that will prohibit local users from
> >>>>>> connecting to a certain node. I do not believe that this is
> >> currently a
> >>>>>> feature, is it?
> >>>>>>
> >>>>>> steve
> >>>>>> W3RX
> >>>>>> _______________________________________________
> >>>>>>
> >>>>>> ARM-allstar mailing list
> >>>>>> ARM-allstar at hamvoip.org
> >>>>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>>>>>
> >>>>>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >>>>>>
> >>>>>
> >>>>>
> >>>>> ------------------------------
> >>>>>
> >>>>> Message: 3
> >>>>> Date: Tue, 6 Aug 2019 19:26:13 -0400
> >>>>> From: Doug Crompton <wa3dsp at gmail.com>
> >>>>> To: ARM Allstar <arm-allstar at hamvoip.org>
> >>>>> Subject: [arm-allstar] TK8180 FOB interfacing
> >>>>> Message-ID:
> >>>>>   <CAMp6vsuss1m=e9S=2S1eP8gobmkWx4UQdW4mQt-vg3iq=
> >> ee3BA at mail.gmail.com>
> >>>>> Content-Type: text/plain; charset="utf-8"
> >>>>>
> >>>>> From: Kevin Halton <khalton at cox.net>
> >>>>>
> >>>>>
> >>>>> So I've been trying to build an allstar node for some time now. I
> only
> >>> get
> >>>>> 20-30 minutes at a time to work on it. That said, I've tried 2
> >> different
> >>>>> USB interfaces and I still can't seem to get the damn thing to work.
> >>>>>
> >>>>>
> >>>>>
> >>>>> I'm currently using a TK-8180 as the radio because it has a 25 pin
> >>>>> accessory connector on the back which should (theoretically) make
> >> things
> >>>>> easy. If I can get that to work I have lots of ideas for interfacing
> >>> other
> >>>>> radios and I'm more than willing to futz around with usb fobs.
> >>>>>
> >>>>>
> >>>>>
> >>>>> Anyway, here's a diagram of the pinout for the radio from the service
> >>>>> manual (7180 is the same as 8180):
> >>>>>
> >>>>> [image: image.png]
> >>>>>
> >>>>>
> >>>>>
> >>>>> I've tried connecting to this radio using a USB-Rim Lite
> >>>>> <http://www.repeater-builder.com/products/usb-rim-lite.html> and a
> >>> Radio
> >>>>> Farm Projects VOIP CM119B Interface
> >>>>> <https://sites.google.com/site/radiofarmprojects/home/voip-interface
> >>> .
> >>>>>
> >>>>>
> >>>>>
> >>>>> The RIM Lite doesn't appear to pull down the PTT I/O enough to stay
> >>> keyed
> >>>>> and I can't seem to get any audio in or out of it (using SimpleUSB
> >>> Tune).
> >>>>>
> >>>>>
> >>>>>
> >>>>> The CM119B Interface seems to do a fine job doing PTT but again, no
> >>> audio
> >>>>> in or out as far as I can tell.
> >>>>>
> >>>>>
> >>>>>
> >>>>> I'm using these pins on the radio:
> >>>>>
> >>>>> 5 - DI - Data Input
> >>>>>
> >>>>> 7 - Ground
> >>>>>
> >>>>> 12 - IO7 - Configured for COS
> >>>>>
> >>>>> 13 - IO6 - Configured for PTT
> >>>>>
> >>>>> 19 - DEO - Discriminator External Output
> >>>>>
> >>>>>
> >>>>>
> >>>>> Any ideas as to where I'm going wrong? Any feedback is appreciated
> >>>>> -------------- next part --------------
> >>>>> An HTML attachment was scrubbed...
> >>>>> URL: <
> >>>
> >>
> http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20190806/e67bcc92/attachment.html
> >>>>
> >>>>> -------------- next part --------------
> >>>>> A non-text attachment was scrubbed...
> >>>>> Name: image001.png
> >>>>> Type: image/png
> >>>>> Size: 12611 bytes
> >>>>> Desc: not available
> >>>>> URL: <
> >>>
> >>
> http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20190806/e67bcc92/attachment.png
> >>>>
> >>>>>
> >>>>> ------------------------------
> >>>>>
> >>>>> Subject: Digest Footer
> >>>>>
> >>>>> _______________________________________________
> >>>>> ARM-allstar mailing list
> >>>>> ARM-allstar at hamvoip.org
> >>>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>>>>
> >>>>>
> >>>>> ------------------------------
> >>>>>
> >>>>> End of ARM-allstar Digest, Vol 63, Issue 14
> >>>>> *******************************************
> >>>>
> >>>> _______________________________________________
> >>>>
> >>>> ARM-allstar mailing list
> >>>> ARM-allstar at hamvoip.org
> >>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>>>
> >>>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >>>
> >>> _______________________________________________
> >>>
> >>> ARM-allstar mailing list
> >>> ARM-allstar at hamvoip.org
> >>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>>
> >>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >> _______________________________________________
> >>
> >> ARM-allstar mailing list
> >> ARM-allstar at hamvoip.org
> >> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>
> >> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >> _______________________________________________
> >>
> >> ARM-allstar mailing list
> >> ARM-allstar at hamvoip.org
> >> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>
> >> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> >
> > ------------------------------
> >
> > Message: 2
> > Date: Tue, 6 Aug 2019 23:27:42 -0400
> > From: Ed Wilhelm <vacuumtubesforever at gmail.com>
> > To: arm-allstar at hamvoip.org
> > Subject: Re: [arm-allstar] TK8180 FOB interfacing
> > Message-ID: <8d5eccc5-af9f-9c1e-0116-844ef2924539 at gmail.com>
> > Content-Type: text/plain; charset=utf-8; format=flowed
> >
> > Use Pin 17 AFO for your receive audio. This is squelched filtered audio.
> >
> > Use Pin 6 Ext Mic input for your transmit audio.
> >
> > With the FPU program your choice for TOR and PTT.
> >
> > Have used a lot of these Kenwoods in various projects, they work great.
> >
> > Ed W8VT
> >
> > On 8/6/19 7:26 PM, "Doug Crompton via ARM-allstar" wrote:
> >>
> >> From:?Kevin Halton <khalton at cox.net <mailto:khalton at cox.net>>
> >>
> >>
> >> So I've been trying to build an allstar node for some time now. I only
> >> get 20-30 minutes at a time to work on it. That said, I've tried 2
> >> different USB interfaces and I still can't seem to get the damn thing
> >> to work.
> >>
> >> I'm currently using a TK-8180 as the radio because it has a 25 pin
> >> accessory connector on the back which should (theoretically) make
> >> things easy. If I can get that to work I have lots of ideas for
> >> interfacing other radios and I'm more than willing to futz around with
> >> usb fobs.
> >>
> >> Anyway, here's a diagram of the pinout for the radio from the service
> >> manual (7180 is the same as 8180):
> >>
> >> image.png
> >>
> >> I've tried connecting to this radio using a USB-Rim Lite
> >> <http://www.repeater-builder.com/products/usb-rim-lite.html> and a
> >> Radio Farm Projects?VOIP CM119B Interface
> >> <https://sites.google.com/site/radiofarmprojects/home/voip-interface>.
> >>
> >> The RIM Lite doesn't appear to pull down the PTT I/O enough to stay
> >> keyed and I can't seem to get any audio in or out of it (using
> >> SimpleUSB Tune).
> >>
> >> The CM119B Interface seems to do a fine job doing PTT but again, no
> >> audio in or out as far as I can tell.
> >>
> >> I'm using these pins on the radio:
> >>
> >> 5 - DI - Data Input
> >>
> >> 7 - Ground
> >>
> >> 12 - IO7 - Configured for COS
> >>
> >> 13 - IO6 - Configured for PTT
> >>
> >> 19 - DEO - Discriminator External Output
> >>
> >> Any ideas as to where I'm going wrong? Any feedback is appreciated
> >>
> >>
> >> _______________________________________________
> >>
> >> ARM-allstar mailing list
> >> ARM-allstar at hamvoip.org
> >> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>
> >> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> >
> >
> >
> > ------------------------------
> >
> > Message: 3
> > Date: Tue, 6 Aug 2019 23:40:31 -0400
> > From: Steve Liggett <sbliggett2 at gmail.com>
> > To: arm-allstar at hamvoip.org
> > Subject: Re: [arm-allstar] ARM-allstar Digest, Vol 63, Issue 15
> > Message-ID: <461118EF-5689-4621-B658-99342312D009 at gmail.com>
> > Content-Type: text/plain;     charset=us-ascii
> >
> > NO, I want to block all users the ability to connect to that node.
> >
> > steve
> >
> >> On Aug 6, 2019, at 11:25 PM, arm-allstar-request at hamvoip.org wrote:
> >>
> >> Send ARM-allstar mailing list submissions to
> >>      arm-allstar at hamvoip.org
> >>
> >> To subscribe or unsubscribe via the World Wide Web, visit
> >>      http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >> or, via email, send a message with subject or body 'help' to
> >>      arm-allstar-request at hamvoip.org
> >>
> >> You can reach the person managing the list at
> >>      arm-allstar-owner at hamvoip.org
> >>
> >> When replying, please edit your Subject line so it is more specific
> >> than "Re: Contents of ARM-allstar digest..."
> >>
> >>
> >> Today's Topics:
> >>
> >>  1. Re: ARM-allstar Digest, Vol 63, Issue 14 (Steve Liggett)
> >>  2. Re: ARM-allstar Digest, Vol 63, Issue 14 (Chris)
> >>  3. Re: ARM-allstar Digest, Vol 63, Issue 14 (Doug Crompton)
> >>  4. Re: TK8180 FOB interfacing (Mark Johnston)
> >>  5. Re: ARM-allstar Digest, Vol 63, Issue 14 (Danny Siminiuk)
> >>
> >>
> >> ----------------------------------------------------------------------
> >>
> >> Message: 1
> >> Date: Tue, 6 Aug 2019 21:31:48 -0400
> >> From: Steve Liggett <sbliggett2 at gmail.com>
> >> To: arm-allstar at hamvoip.org
> >> Subject: Re: [arm-allstar] ARM-allstar Digest, Vol 63, Issue 14
> >> Message-ID: <36FA6C98-47FE-4214-832B-5BE0100C3362 at gmail.com>
> >> Content-Type: text/plain;    charset=utf-8
> >>
> >> Doug:
> >>
> >> "I would like to call a script that will prohibit local users from
> connecting to a certain node.?
> >>
> >> The node-ban-allow blocks a distant node from connecting to me
> (incoming block), correct? I want to not allow a LOCAL user of the
> repeater/node from connecting to a certain distant node. So, the aim is to
> restrict an outbound-originated connection.
> >>
> >> steve
> >> W3RX
> >>
> >>
> >>
> >>> On Aug 6, 2019, at 7:26 PM, arm-allstar-request at hamvoip.org wrote:
> >>>
> >>> Send ARM-allstar mailing list submissions to
> >>>     arm-allstar at hamvoip.org
> >>>
> >>> To subscribe or unsubscribe via the World Wide Web, visit
> >>>     http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>> or, via email, send a message with subject or body 'help' to
> >>>     arm-allstar-request at hamvoip.org
> >>>
> >>> You can reach the person managing the list at
> >>>     arm-allstar-owner at hamvoip.org
> >>>
> >>> When replying, please edit your Subject line so it is more specific
> >>> than "Re: Contents of ARM-allstar digest..."
> >>>
> >>>
> >>> Today's Topics:
> >>>
> >>> 1. Prohibit connection (Steve Liggett)
> >>> 2. Re: Prohibit connection (Doug Crompton)
> >>> 3. TK8180 FOB interfacing (Doug Crompton)
> >>>
> >>>
> >>> ----------------------------------------------------------------------
> >>>
> >>> Message: 1
> >>> Date: Tue, 6 Aug 2019 12:12:26 -0400
> >>> From: Steve Liggett <sbliggett2 at gmail.com>
> >>> To: arm-allstar at hamvoip.org
> >>> Subject: [arm-allstar] Prohibit connection
> >>> Message-ID: <0FC40B0F-6032-4729-939F-D4487E8E480F at gmail.com>
> >>> Content-Type: text/plain;   charset=us-ascii
> >>>
> >>> I would like to call a script that will prohibit local users from
> connecting to a certain node. I do not believe that this is currently a
> feature, is it?
> >>>
> >>> steve
> >>> W3RX
> >>>
> >>> ------------------------------
> >>>
> >>> Message: 2
> >>> Date: Tue, 6 Aug 2019 12:51:00 -0400
> >>> From: Doug Crompton <wa3dsp at gmail.com>
> >>> To: ARM Allstar <arm-allstar at hamvoip.org>
> >>> Subject: Re: [arm-allstar] Prohibit connection
> >>> Message-ID:
> >>>     <
> CAMp6vssKPzuiVEXj43RTqELDU3bSNvgG6x+TFWELjY2s3pHuug at mail.gmail.com>
> >>> Content-Type: text/plain; charset="UTF-8"
> >>>
> >>> Steve,
> >>>
> >>> Not sure exactly what you want but there is a node ban (or allow) in
> >>> Supermon called restrict and also a stand-alone script
> node-ban-allow.sh
> >>> which would ban a node from connecting.. What is it exactly you want
> to do?
> >>>
> >>>
> >>> *73 Doug*
> >>>
> >>> *WA3DSP*
> >>>
> >>> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> >>>
> >>>
> >>>
> >>> On Tue, Aug 6, 2019 at 12:47 PM "Steve Liggett via ARM-allstar" <
> >>> arm-allstar at hamvoip.org> wrote:
> >>>
> >>>> I would like to call a script that will prohibit local users from
> >>>> connecting to a certain node. I do not believe that this is currently
> a
> >>>> feature, is it?
> >>>>
> >>>> steve
> >>>> W3RX
> >>>> _______________________________________________
> >>>>
> >>>> ARM-allstar mailing list
> >>>> ARM-allstar at hamvoip.org
> >>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>>>
> >>>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >>>>
> >>>
> >>>
> >>> ------------------------------
> >>>
> >>> Message: 3
> >>> Date: Tue, 6 Aug 2019 19:26:13 -0400
> >>> From: Doug Crompton <wa3dsp at gmail.com>
> >>> To: ARM Allstar <arm-allstar at hamvoip.org>
> >>> Subject: [arm-allstar] TK8180 FOB interfacing
> >>> Message-ID:
> >>>     <CAMp6vsuss1m=e9S=2S1eP8gobmkWx4UQdW4mQt-vg3iq=
> ee3BA at mail.gmail.com>
> >>> Content-Type: text/plain; charset="utf-8"
> >>>
> >>> From: Kevin Halton <khalton at cox.net>
> >>>
> >>>
> >>> So I've been trying to build an allstar node for some time now. I only
> get
> >>> 20-30 minutes at a time to work on it. That said, I've tried 2
> different
> >>> USB interfaces and I still can't seem to get the damn thing to work.
> >>>
> >>>
> >>>
> >>> I'm currently using a TK-8180 as the radio because it has a 25 pin
> >>> accessory connector on the back which should (theoretically) make
> things
> >>> easy. If I can get that to work I have lots of ideas for interfacing
> other
> >>> radios and I'm more than willing to futz around with usb fobs.
> >>>
> >>>
> >>>
> >>> Anyway, here's a diagram of the pinout for the radio from the service
> >>> manual (7180 is the same as 8180):
> >>>
> >>> [image: image.png]
> >>>
> >>>
> >>>
> >>> I've tried connecting to this radio using a USB-Rim Lite
> >>> <http://www.repeater-builder.com/products/usb-rim-lite.html> and a
> Radio
> >>> Farm Projects VOIP CM119B Interface
> >>> <https://sites.google.com/site/radiofarmprojects/home/voip-interface>.
> >>>
> >>>
> >>>
> >>> The RIM Lite doesn't appear to pull down the PTT I/O enough to stay
> keyed
> >>> and I can't seem to get any audio in or out of it (using SimpleUSB
> Tune).
> >>>
> >>>
> >>>
> >>> The CM119B Interface seems to do a fine job doing PTT but again, no
> audio
> >>> in or out as far as I can tell.
> >>>
> >>>
> >>>
> >>> I'm using these pins on the radio:
> >>>
> >>> 5 - DI - Data Input
> >>>
> >>> 7 - Ground
> >>>
> >>> 12 - IO7 - Configured for COS
> >>>
> >>> 13 - IO6 - Configured for PTT
> >>>
> >>> 19 - DEO - Discriminator External Output
> >>>
> >>>
> >>>
> >>> Any ideas as to where I'm going wrong? Any feedback is appreciated
> >>> -------------- next part --------------
> >>> An HTML attachment was scrubbed...
> >>> URL: <
> http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20190806/e67bcc92/attachment.html
> >
> >>> -------------- next part --------------
> >>> A non-text attachment was scrubbed...
> >>> Name: image001.png
> >>> Type: image/png
> >>> Size: 12611 bytes
> >>> Desc: not available
> >>> URL: <
> http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20190806/e67bcc92/attachment.png
> >
> >>>
> >>> ------------------------------
> >>>
> >>> Subject: Digest Footer
> >>>
> >>> _______________________________________________
> >>> ARM-allstar mailing list
> >>> ARM-allstar at hamvoip.org
> >>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>>
> >>>
> >>> ------------------------------
> >>>
> >>> End of ARM-allstar Digest, Vol 63, Issue 14
> >>> *******************************************
> >>
> >>
> >>
> >> ------------------------------
> >>
> >> Message: 2
> >> Date: Tue, 6 Aug 2019 18:41:58 -0700
> >> From: Chris <chood73 at yahoo.com>
> >> To: ARM Allstar <arm-allstar at hamvoip.org>
> >> Subject: Re: [arm-allstar] ARM-allstar Digest, Vol 63, Issue 14
> >> Message-ID: <C5DDF101-D057-48C9-93FF-4BE56F1C52C6 at yahoo.com>
> >> Content-Type: text/plain;    charset=utf-8
> >>
> >> What about defining the node at the bottom of the rpt.conf but give it
> a bogus IP address. If anyone tried to connect to that node, rpt would call
> on a bad address and just not do anything.
> >>
> >> Would that work?
> >>
> >> Chris
> >> WB4ULK
> >>
> >>> On Aug 6, 2019, at 6:31 PM, Steve Liggett via ARM-allstar <
> arm-allstar at hamvoip.org> wrote:
> >>>
> >>> Doug:
> >>>
> >>> "I would like to call a script that will prohibit local users from
> connecting to a certain node.?
> >>>
> >>> The node-ban-allow blocks a distant node from connecting to me
> (incoming block), correct? I want to not allow a LOCAL user of the
> repeater/node from connecting to a certain distant node. So, the aim is to
> restrict an outbound-originated connection.
> >>>
> >>> steve
> >>> W3RX
> >>>
> >>>
> >>>
> >>>> On Aug 6, 2019, at 7:26 PM, arm-allstar-request at hamvoip.org wrote:
> >>>>
> >>>> Send ARM-allstar mailing list submissions to
> >>>>  arm-allstar at hamvoip.org
> >>>>
> >>>> To subscribe or unsubscribe via the World Wide Web, visit
> >>>>  http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>>> or, via email, send a message with subject or body 'help' to
> >>>>  arm-allstar-request at hamvoip.org
> >>>>
> >>>> You can reach the person managing the list at
> >>>>  arm-allstar-owner at hamvoip.org
> >>>>
> >>>> When replying, please edit your Subject line so it is more specific
> >>>> than "Re: Contents of ARM-allstar digest..."
> >>>>
> >>>>
> >>>> Today's Topics:
> >>>>
> >>>> 1. Prohibit connection (Steve Liggett)
> >>>> 2. Re: Prohibit connection (Doug Crompton)
> >>>> 3. TK8180 FOB interfacing (Doug Crompton)
> >>>>
> >>>>
> >>>> ----------------------------------------------------------------------
> >>>>
> >>>> Message: 1
> >>>> Date: Tue, 6 Aug 2019 12:12:26 -0400
> >>>> From: Steve Liggett <sbliggett2 at gmail.com>
> >>>> To: arm-allstar at hamvoip.org
> >>>> Subject: [arm-allstar] Prohibit connection
> >>>> Message-ID: <0FC40B0F-6032-4729-939F-D4487E8E480F at gmail.com>
> >>>> Content-Type: text/plain;    charset=us-ascii
> >>>>
> >>>> I would like to call a script that will prohibit local users from
> connecting to a certain node. I do not believe that this is currently a
> feature, is it?
> >>>>
> >>>> steve
> >>>> W3RX
> >>>>
> >>>> ------------------------------
> >>>>
> >>>> Message: 2
> >>>> Date: Tue, 6 Aug 2019 12:51:00 -0400
> >>>> From: Doug Crompton <wa3dsp at gmail.com>
> >>>> To: ARM Allstar <arm-allstar at hamvoip.org>
> >>>> Subject: Re: [arm-allstar] Prohibit connection
> >>>> Message-ID:
> >>>>  <CAMp6vssKPzuiVEXj43RTqELDU3bSNvgG6x+TFWELjY2s3pHuug at mail.gmail.com>
> >>>> Content-Type: text/plain; charset="UTF-8"
> >>>>
> >>>> Steve,
> >>>>
> >>>> Not sure exactly what you want but there is a node ban (or allow) in
> >>>> Supermon called restrict and also a stand-alone script
> node-ban-allow.sh
> >>>> which would ban a node from connecting.. What is it exactly you want
> to do?
> >>>>
> >>>>
> >>>> *73 Doug*
> >>>>
> >>>> *WA3DSP*
> >>>>
> >>>> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> >>>>
> >>>>
> >>>>
> >>>> On Tue, Aug 6, 2019 at 12:47 PM "Steve Liggett via ARM-allstar" <
> >>>> arm-allstar at hamvoip.org> wrote:
> >>>>
> >>>>> I would like to call a script that will prohibit local users from
> >>>>> connecting to a certain node. I do not believe that this is
> currently a
> >>>>> feature, is it?
> >>>>>
> >>>>> steve
> >>>>> W3RX
> >>>>> _______________________________________________
> >>>>>
> >>>>> ARM-allstar mailing list
> >>>>> ARM-allstar at hamvoip.org
> >>>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>>>>
> >>>>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >>>>>
> >>>>
> >>>>
> >>>> ------------------------------
> >>>>
> >>>> Message: 3
> >>>> Date: Tue, 6 Aug 2019 19:26:13 -0400
> >>>> From: Doug Crompton <wa3dsp at gmail.com>
> >>>> To: ARM Allstar <arm-allstar at hamvoip.org>
> >>>> Subject: [arm-allstar] TK8180 FOB interfacing
> >>>> Message-ID:
> >>>>  <CAMp6vsuss1m=e9S=2S1eP8gobmkWx4UQdW4mQt-vg3iq=ee3BA at mail.gmail.com>
> >>>> Content-Type: text/plain; charset="utf-8"
> >>>>
> >>>> From: Kevin Halton <khalton at cox.net>
> >>>>
> >>>>
> >>>> So I've been trying to build an allstar node for some time now. I
> only get
> >>>> 20-30 minutes at a time to work on it. That said, I've tried 2
> different
> >>>> USB interfaces and I still can't seem to get the damn thing to work.
> >>>>
> >>>>
> >>>>
> >>>> I'm currently using a TK-8180 as the radio because it has a 25 pin
> >>>> accessory connector on the back which should (theoretically) make
> things
> >>>> easy. If I can get that to work I have lots of ideas for interfacing
> other
> >>>> radios and I'm more than willing to futz around with usb fobs.
> >>>>
> >>>>
> >>>>
> >>>> Anyway, here's a diagram of the pinout for the radio from the service
> >>>> manual (7180 is the same as 8180):
> >>>>
> >>>> [image: image.png]
> >>>>
> >>>>
> >>>>
> >>>> I've tried connecting to this radio using a USB-Rim Lite
> >>>> <http://www.repeater-builder.com/products/usb-rim-lite.html> and a
> Radio
> >>>> Farm Projects VOIP CM119B Interface
> >>>> <https://sites.google.com/site/radiofarmprojects/home/voip-interface
> >.
> >>>>
> >>>>
> >>>>
> >>>> The RIM Lite doesn't appear to pull down the PTT I/O enough to stay
> keyed
> >>>> and I can't seem to get any audio in or out of it (using SimpleUSB
> Tune).
> >>>>
> >>>>
> >>>>
> >>>> The CM119B Interface seems to do a fine job doing PTT but again, no
> audio
> >>>> in or out as far as I can tell.
> >>>>
> >>>>
> >>>>
> >>>> I'm using these pins on the radio:
> >>>>
> >>>> 5 - DI - Data Input
> >>>>
> >>>> 7 - Ground
> >>>>
> >>>> 12 - IO7 - Configured for COS
> >>>>
> >>>> 13 - IO6 - Configured for PTT
> >>>>
> >>>> 19 - DEO - Discriminator External Output
> >>>>
> >>>>
> >>>>
> >>>> Any ideas as to where I'm going wrong? Any feedback is appreciated
> >>>> -------------- next part --------------
> >>>> An HTML attachment was scrubbed...
> >>>> URL: <
> http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20190806/e67bcc92/attachment.html
> >
> >>>> -------------- next part --------------
> >>>> A non-text attachment was scrubbed...
> >>>> Name: image001.png
> >>>> Type: image/png
> >>>> Size: 12611 bytes
> >>>> Desc: not available
> >>>> URL: <
> http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20190806/e67bcc92/attachment.png
> >
> >>>>
> >>>> ------------------------------
> >>>>
> >>>> Subject: Digest Footer
> >>>>
> >>>> _______________________________________________
> >>>> ARM-allstar mailing list
> >>>> ARM-allstar at hamvoip.org
> >>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>>>
> >>>>
> >>>> ------------------------------
> >>>>
> >>>> End of ARM-allstar Digest, Vol 63, Issue 14
> >>>> *******************************************
> >>>
> >>> _______________________________________________
> >>>
> >>> ARM-allstar mailing list
> >>> ARM-allstar at hamvoip.org
> >>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>>
> >>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >>
> >>
> >>
> >> ------------------------------
> >>
> >> Message: 3
> >> Date: Tue, 6 Aug 2019 22:34:44 -0400
> >> From: Doug Crompton <wa3dsp at gmail.com>
> >> To: ARM Allstar <arm-allstar at hamvoip.org>
> >> Subject: Re: [arm-allstar] ARM-allstar Digest, Vol 63, Issue 14
> >> Message-ID:
> >>      <
> CAMp6vsteqxgbG+GqYHb4EuLLxU7+Ojc1RuA_L6Zjyk9CF+6nJQ at mail.gmail.com>
> >> Content-Type: text/plain; charset="UTF-8"
> >>
> >> But he I believe he just wants to block one person from doing that not
> >> everyone. How about telling the person not to connect to that node and
> if
> >> they don't comply ban them. That is what I would do. Is this a guy who
> >> comes in on RF on your repeater? In that case there is really nothing
> you
> >> can do. There is no way to know who it is. You could change the connect
> >> commands (and others) and only share it then with authorized users but
> >> anyone can listen on the air and mimic the tones.
> >>
> >> BTW there is a guy on your repeater W3YT who just about every night
> tries
> >> to connect somewhere and we hear his tones which means they are not
> >> working. He never gives up we finally have to tell him it is not going
> to
> >> work!
> >>
> >>
> >> *73 Doug*
> >>
> >> *WA3DSP*
> >>
> >> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> >>
> >>
> >> On Tue, Aug 6, 2019 at 10:25 PM "Chris via ARM-allstar" <
> >> arm-allstar at hamvoip.org> wrote:
> >>
> >>> What about defining the node at the bottom of the rpt.conf but give it
> a
> >>> bogus IP address. If anyone tried to connect to that node, rpt would
> call
> >>> on a bad address and just not do anything.
> >>>
> >>> Would that work?
> >>>
> >>> Chris
> >>> WB4ULK
> >>>
> >>>> On Aug 6, 2019, at 6:31 PM, Steve Liggett via ARM-allstar <
> >>> arm-allstar at hamvoip.org> wrote:
> >>>>
> >>>> Doug:
> >>>>
> >>>> "I would like to call a script that will prohibit local users from
> >>> connecting to a certain node.?
> >>>>
> >>>> The node-ban-allow blocks a distant node from connecting to me
> (incoming
> >>> block), correct? I want to not allow a LOCAL user of the repeater/node
> from
> >>> connecting to a certain distant node. So, the aim is to restrict an
> >>> outbound-originated connection.
> >>>>
> >>>> steve
> >>>> W3RX
> >>>>
> >>>>
> >>>>
> >>>>> On Aug 6, 2019, at 7:26 PM, arm-allstar-request at hamvoip.org wrote:
> >>>>>
> >>>>> Send ARM-allstar mailing list submissions to
> >>>>>  arm-allstar at hamvoip.org
> >>>>>
> >>>>> To subscribe or unsubscribe via the World Wide Web, visit
> >>>>>  http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>>>> or, via email, send a message with subject or body 'help' to
> >>>>>  arm-allstar-request at hamvoip.org
> >>>>>
> >>>>> You can reach the person managing the list at
> >>>>>  arm-allstar-owner at hamvoip.org
> >>>>>
> >>>>> When replying, please edit your Subject line so it is more specific
> >>>>> than "Re: Contents of ARM-allstar digest..."
> >>>>>
> >>>>>
> >>>>> Today's Topics:
> >>>>>
> >>>>> 1. Prohibit connection (Steve Liggett)
> >>>>> 2. Re: Prohibit connection (Doug Crompton)
> >>>>> 3. TK8180 FOB interfacing (Doug Crompton)
> >>>>>
> >>>>>
> >>>>>
> ----------------------------------------------------------------------
> >>>>>
> >>>>> Message: 1
> >>>>> Date: Tue, 6 Aug 2019 12:12:26 -0400
> >>>>> From: Steve Liggett <sbliggett2 at gmail.com>
> >>>>> To: arm-allstar at hamvoip.org
> >>>>> Subject: [arm-allstar] Prohibit connection
> >>>>> Message-ID: <0FC40B0F-6032-4729-939F-D4487E8E480F at gmail.com>
> >>>>> Content-Type: text/plain;    charset=us-ascii
> >>>>>
> >>>>> I would like to call a script that will prohibit local users from
> >>> connecting to a certain node. I do not believe that this is currently a
> >>> feature, is it?
> >>>>>
> >>>>> steve
> >>>>> W3RX
> >>>>>
> >>>>> ------------------------------
> >>>>>
> >>>>> Message: 2
> >>>>> Date: Tue, 6 Aug 2019 12:51:00 -0400
> >>>>> From: Doug Crompton <wa3dsp at gmail.com>
> >>>>> To: ARM Allstar <arm-allstar at hamvoip.org>
> >>>>> Subject: Re: [arm-allstar] Prohibit connection
> >>>>> Message-ID:
> >>>>>  <CAMp6vssKPzuiVEXj43RTqELDU3bSNvgG6x+TFWELjY2s3pHuug at mail.gmail.com
> >
> >>>>> Content-Type: text/plain; charset="UTF-8"
> >>>>>
> >>>>> Steve,
> >>>>>
> >>>>> Not sure exactly what you want but there is a node ban (or allow) in
> >>>>> Supermon called restrict and also a stand-alone script
> >>> node-ban-allow.sh
> >>>>> which would ban a node from connecting.. What is it exactly you want
> to
> >>> do?
> >>>>>
> >>>>>
> >>>>> *73 Doug*
> >>>>>
> >>>>> *WA3DSP*
> >>>>>
> >>>>> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio
> >*
> >>>>>
> >>>>>
> >>>>>
> >>>>> On Tue, Aug 6, 2019 at 12:47 PM "Steve Liggett via ARM-allstar" <
> >>>>> arm-allstar at hamvoip.org> wrote:
> >>>>>
> >>>>>> I would like to call a script that will prohibit local users from
> >>>>>> connecting to a certain node. I do not believe that this is
> currently a
> >>>>>> feature, is it?
> >>>>>>
> >>>>>> steve
> >>>>>> W3RX
> >>>>>> _______________________________________________
> >>>>>>
> >>>>>> ARM-allstar mailing list
> >>>>>> ARM-allstar at hamvoip.org
> >>>>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>>>>>
> >>>>>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >>>>>>
> >>>>>
> >>>>>
> >>>>> ------------------------------
> >>>>>
> >>>>> Message: 3
> >>>>> Date: Tue, 6 Aug 2019 19:26:13 -0400
> >>>>> From: Doug Crompton <wa3dsp at gmail.com>
> >>>>> To: ARM Allstar <arm-allstar at hamvoip.org>
> >>>>> Subject: [arm-allstar] TK8180 FOB interfacing
> >>>>> Message-ID:
> >>>>>  <CAMp6vsuss1m=e9S=2S1eP8gobmkWx4UQdW4mQt-vg3iq=ee3BA at mail.gmail.com
> >
> >>>>> Content-Type: text/plain; charset="utf-8"
> >>>>>
> >>>>> From: Kevin Halton <khalton at cox.net>
> >>>>>
> >>>>>
> >>>>> So I've been trying to build an allstar node for some time now. I
> only
> >>> get
> >>>>> 20-30 minutes at a time to work on it. That said, I've tried 2
> different
> >>>>> USB interfaces and I still can't seem to get the damn thing to work.
> >>>>>
> >>>>>
> >>>>>
> >>>>> I'm currently using a TK-8180 as the radio because it has a 25 pin
> >>>>> accessory connector on the back which should (theoretically) make
> things
> >>>>> easy. If I can get that to work I have lots of ideas for interfacing
> >>> other
> >>>>> radios and I'm more than willing to futz around with usb fobs.
> >>>>>
> >>>>>
> >>>>>
> >>>>> Anyway, here's a diagram of the pinout for the radio from the service
> >>>>> manual (7180 is the same as 8180):
> >>>>>
> >>>>> [image: image.png]
> >>>>>
> >>>>>
> >>>>>
> >>>>> I've tried connecting to this radio using a USB-Rim Lite
> >>>>> <http://www.repeater-builder.com/products/usb-rim-lite.html> and a
> >>> Radio
> >>>>> Farm Projects VOIP CM119B Interface
> >>>>> <https://sites.google.com/site/radiofarmprojects/home/voip-interface
> >.
> >>>>>
> >>>>>
> >>>>>
> >>>>> The RIM Lite doesn't appear to pull down the PTT I/O enough to stay
> >>> keyed
> >>>>> and I can't seem to get any audio in or out of it (using SimpleUSB
> >>> Tune).
> >>>>>
> >>>>>
> >>>>>
> >>>>> The CM119B Interface seems to do a fine job doing PTT but again, no
> >>> audio
> >>>>> in or out as far as I can tell.
> >>>>>
> >>>>>
> >>>>>
> >>>>> I'm using these pins on the radio:
> >>>>>
> >>>>> 5 - DI - Data Input
> >>>>>
> >>>>> 7 - Ground
> >>>>>
> >>>>> 12 - IO7 - Configured for COS
> >>>>>
> >>>>> 13 - IO6 - Configured for PTT
> >>>>>
> >>>>> 19 - DEO - Discriminator External Output
> >>>>>
> >>>>>
> >>>>>
> >>>>> Any ideas as to where I'm going wrong? Any feedback is appreciated
> >>>>> -------------- next part --------------
> >>>>> An HTML attachment was scrubbed...
> >>>>> URL: <
> >>>
> http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20190806/e67bcc92/attachment.html
> >>>>
> >>>>> -------------- next part --------------
> >>>>> A non-text attachment was scrubbed...
> >>>>> Name: image001.png
> >>>>> Type: image/png
> >>>>> Size: 12611 bytes
> >>>>> Desc: not available
> >>>>> URL: <
> >>>
> http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20190806/e67bcc92/attachment.png
> >>>>
> >>>>>
> >>>>> ------------------------------
> >>>>>
> >>>>> Subject: Digest Footer
> >>>>>
> >>>>> _______________________________________________
> >>>>> ARM-allstar mailing list
> >>>>> ARM-allstar at hamvoip.org
> >>>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>>>>
> >>>>>
> >>>>> ------------------------------
> >>>>>
> >>>>> End of ARM-allstar Digest, Vol 63, Issue 14
> >>>>> *******************************************
> >>>>
> >>>> _______________________________________________
> >>>>
> >>>> ARM-allstar mailing list
> >>>> ARM-allstar at hamvoip.org
> >>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>>>
> >>>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >>>
> >>> _______________________________________________
> >>>
> >>> ARM-allstar mailing list
> >>> ARM-allstar at hamvoip.org
> >>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>>
> >>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >>
> >>
> >> ------------------------------
> >>
> >> Message: 4
> >> Date: Tue, 6 Aug 2019 19:50:21 -0700
> >> From: Mark Johnston <markjohnston73 at gmail.com>
> >> To: ARM Allstar <arm-allstar at hamvoip.org>
> >> Subject: Re: [arm-allstar] TK8180 FOB interfacing
> >> Message-ID:
> >>      <CAARNdJF0p+Wc_j9yb+V=q7dnOQSk=egB6=
> HyBYWLRbvHyyqaHA at mail.gmail.com>
> >> Content-Type: text/plain; charset="UTF-8"
> >>
> >> There are settings in the programming software for Audio DI or MIC /
> MIC 2
> >> I believe it has to be changed to accept it from DI instead, let me
> take a
> >> look I think I have a config file you could try.
> >>
> >>
> >>
> >> Mark
> >>
> >>
> >> ------------------------------
> >>
> >> Message: 5
> >> Date: Tue, 6 Aug 2019 20:15:28 -0700 (PDT)
> >> From: Danny Siminiuk <daniel at siminiuk.com>
> >> To: ARM Allstar <arm-allstar at hamvoip.org>
> >> Subject: Re: [arm-allstar] ARM-allstar Digest, Vol 63, Issue 14
> >> Message-ID:
> >>      <1613545458.1503234.1565147728373.JavaMail.zimbra at siminiuk.com>
> >> Content-Type: text/plain; charset=utf-8
> >>
> >> I didn't see where he asked that only a specific RF user to be blocked
> from connecting to node X.
> >>
> >> Chris has a good idea though. Define node X as a local node and set the
> IP address to 127.0.0.1 on a UDP port that is not open or available. Node X
> will never connect.
> >>
> >> Danny
> >> K5CG
> >>
> >> ----- Original Message -----
> >> From: "ARM Allstar" <arm-allstar at hamvoip.org>
> >> To: "ARM Allstar" <arm-allstar at hamvoip.org>
> >> Cc: "wa3dsp" <wa3dsp at gmail.com>
> >> Sent: Tuesday, August 6, 2019 9:34:44 PM
> >> Subject: Re: [arm-allstar] ARM-allstar Digest, Vol 63, Issue 14
> >>
> >> But he I believe he just wants to block one person from doing that not
> >> everyone. How about telling the person not to connect to that node and
> if
> >> they don't comply ban them. That is what I would do. Is this a guy who
> >> comes in on RF on your repeater? In that case there is really nothing
> you
> >> can do. There is no way to know who it is. You could change the connect
> >> commands (and others) and only share it then with authorized users but
> >> anyone can listen on the air and mimic the tones.
> >>
> >> BTW there is a guy on your repeater W3YT who just about every night
> tries
> >> to connect somewhere and we hear his tones which means they are not
> >> working. He never gives up we finally have to tell him it is not going
> to
> >> work!
> >>
> >>
> >> *73 Doug*
> >>
> >> *WA3DSP*
> >>
> >> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> >>
> >>
> >> On Tue, Aug 6, 2019 at 10:25 PM "Chris via ARM-allstar" <
> >> arm-allstar at hamvoip.org> wrote:
> >>
> >>> What about defining the node at the bottom of the rpt.conf but give it
> a
> >>> bogus IP address. If anyone tried to connect to that node, rpt would
> call
> >>> on a bad address and just not do anything.
> >>>
> >>> Would that work?
> >>>
> >>> Chris
> >>> WB4ULK
> >>>
> >>>> On Aug 6, 2019, at 6:31 PM, Steve Liggett via ARM-allstar <
> >>> arm-allstar at hamvoip.org> wrote:
> >>>>
> >>>> Doug:
> >>>>
> >>>> "I would like to call a script that will prohibit local users from
> >>> connecting to a certain node.?
> >>>>
> >>>> The node-ban-allow blocks a distant node from connecting to me
> (incoming
> >>> block), correct? I want to not allow a LOCAL user of the repeater/node
> from
> >>> connecting to a certain distant node. So, the aim is to restrict an
> >>> outbound-originated connection.
> >>>>
> >>>> steve
> >>>> W3RX
> >>>>
> >>>>
> >>>>
> >>>>> On Aug 6, 2019, at 7:26 PM, arm-allstar-request at hamvoip.org wrote:
> >>>>>
> >>>>> Send ARM-allstar mailing list submissions to
> >>>>>  arm-allstar at hamvoip.org
> >>>>>
> >>>>> To subscribe or unsubscribe via the World Wide Web, visit
> >>>>>  http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>>>> or, via email, send a message with subject or body 'help' to
> >>>>>  arm-allstar-request at hamvoip.org
> >>>>>
> >>>>> You can reach the person managing the list at
> >>>>>  arm-allstar-owner at hamvoip.org
> >>>>>
> >>>>> When replying, please edit your Subject line so it is more specific
> >>>>> than "Re: Contents of ARM-allstar digest..."
> >>>>>
> >>>>>
> >>>>> Today's Topics:
> >>>>>
> >>>>> 1. Prohibit connection (Steve Liggett)
> >>>>> 2. Re: Prohibit connection (Doug Crompton)
> >>>>> 3. TK8180 FOB interfacing (Doug Crompton)
> >>>>>
> >>>>>
> >>>>>
> ----------------------------------------------------------------------
> >>>>>
> >>>>> Message: 1
> >>>>> Date: Tue, 6 Aug 2019 12:12:26 -0400
> >>>>> From: Steve Liggett <sbliggett2 at gmail.com>
> >>>>> To: arm-allstar at hamvoip.org
> >>>>> Subject: [arm-allstar] Prohibit connection
> >>>>> Message-ID: <0FC40B0F-6032-4729-939F-D4487E8E480F at gmail.com>
> >>>>> Content-Type: text/plain;    charset=us-ascii
> >>>>>
> >>>>> I would like to call a script that will prohibit local users from
> >>> connecting to a certain node. I do not believe that this is currently a
> >>> feature, is it?
> >>>>>
> >>>>> steve
> >>>>> W3RX
> >>>>>
> >>>>> ------------------------------
> >>>>>
> >>>>> Message: 2
> >>>>> Date: Tue, 6 Aug 2019 12:51:00 -0400
> >>>>> From: Doug Crompton <wa3dsp at gmail.com>
> >>>>> To: ARM Allstar <arm-allstar at hamvoip.org>
> >>>>> Subject: Re: [arm-allstar] Prohibit connection
> >>>>> Message-ID:
> >>>>>  <CAMp6vssKPzuiVEXj43RTqELDU3bSNvgG6x+TFWELjY2s3pHuug at mail.gmail.com
> >
> >>>>> Content-Type: text/plain; charset="UTF-8"
> >>>>>
> >>>>> Steve,
> >>>>>
> >>>>> Not sure exactly what you want but there is a node ban (or allow) in
> >>>>> Supermon called restrict and also a stand-alone script
> >>> node-ban-allow.sh
> >>>>> which would ban a node from connecting.. What is it exactly you want
> to
> >>> do?
> >>>>>
> >>>>>
> >>>>> *73 Doug*
> >>>>>
> >>>>> *WA3DSP*
> >>>>>
> >>>>> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio
> >*
> >>>>>
> >>>>>
> >>>>>
> >>>>> On Tue, Aug 6, 2019 at 12:47 PM "Steve Liggett via ARM-allstar" <
> >>>>> arm-allstar at hamvoip.org> wrote:
> >>>>>
> >>>>>> I would like to call a script that will prohibit local users from
> >>>>>> connecting to a certain node. I do not believe that this is
> currently a
> >>>>>> feature, is it?
> >>>>>>
> >>>>>> steve
> >>>>>> W3RX
> >>>>>> _______________________________________________
> >>>>>>
> >>>>>> ARM-allstar mailing list
> >>>>>> ARM-allstar at hamvoip.org
> >>>>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>>>>>
> >>>>>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >>>>>>
> >>>>>
> >>>>>
> >>>>> ------------------------------
> >>>>>
> >>>>> Message: 3
> >>>>> Date: Tue, 6 Aug 2019 19:26:13 -0400
> >>>>> From: Doug Crompton <wa3dsp at gmail.com>
> >>>>> To: ARM Allstar <arm-allstar at hamvoip.org>
> >>>>> Subject: [arm-allstar] TK8180 FOB interfacing
> >>>>> Message-ID:
> >>>>>  <CAMp6vsuss1m=e9S=2S1eP8gobmkWx4UQdW4mQt-vg3iq=ee3BA at mail.gmail.com
> >
> >>>>> Content-Type: text/plain; charset="utf-8"
> >>>>>
> >>>>> From: Kevin Halton <khalton at cox.net>
> >>>>>
> >>>>>
> >>>>> So I've been trying to build an allstar node for some time now. I
> only
> >>> get
> >>>>> 20-30 minutes at a time to work on it. That said, I've tried 2
> different
> >>>>> USB interfaces and I still can't seem to get the damn thing to work.
> >>>>>
> >>>>>
> >>>>>
> >>>>> I'm currently using a TK-8180 as the radio because it has a 25 pin
> >>>>> accessory connector on the back which should (theoretically) make
> things
> >>>>> easy. If I can get that to work I have lots of ideas for interfacing
> >>> other
> >>>>> radios and I'm more than willing to futz around with usb fobs.
> >>>>>
> >>>>>
> >>>>>
> >>>>> Anyway, here's a diagram of the pinout for the radio from the service
> >>>>> manual (7180 is the same as 8180):
> >>>>>
> >>>>> [image: image.png]
> >>>>>
> >>>>>
> >>>>>
> >>>>> I've tried connecting to this radio using a USB-Rim Lite
> >>>>> <http://www.repeater-builder.com/products/usb-rim-lite.html> and a
> >>> Radio
> >>>>> Farm Projects VOIP CM119B Interface
> >>>>> <https://sites.google.com/site/radiofarmprojects/home/voip-interface
> >.
> >>>>>
> >>>>>
> >>>>>
> >>>>> The RIM Lite doesn't appear to pull down the PTT I/O enough to stay
> >>> keyed
> >>>>> and I can't seem to get any audio in or out of it (using SimpleUSB
> >>> Tune).
> >>>>>
> >>>>>
> >>>>>
> >>>>> The CM119B Interface seems to do a fine job doing PTT but again, no
> >>> audio
> >>>>> in or out as far as I can tell.
> >>>>>
> >>>>>
> >>>>>
> >>>>> I'm using these pins on the radio:
> >>>>>
> >>>>> 5 - DI - Data Input
> >>>>>
> >>>>> 7 - Ground
> >>>>>
> >>>>> 12 - IO7 - Configured for COS
> >>>>>
> >>>>> 13 - IO6 - Configured for PTT
> >>>>>
> >>>>> 19 - DEO - Discriminator External Output
> >>>>>
> >>>>>
> >>>>>
> >>>>> Any ideas as to where I'm going wrong? Any feedback is appreciated
> >>>>> -------------- next part --------------
> >>>>> An HTML attachment was scrubbed...
> >>>>> URL: <
> >>>
> http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20190806/e67bcc92/attachment.html
> >>>>
> >>>>> -------------- next part --------------
> >>>>> A non-text attachment was scrubbed...
> >>>>> Name: image001.png
> >>>>> Type: image/png
> >>>>> Size: 12611 bytes
> >>>>> Desc: not available
> >>>>> URL: <
> >>>
> http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20190806/e67bcc92/attachment.png
> >>>>
> >>>>>
> >>>>> ------------------------------
> >>>>>
> >>>>> Subject: Digest Footer
> >>>>>
> >>>>> _______________________________________________
> >>>>> ARM-allstar mailing list
> >>>>> ARM-allstar at hamvoip.org
> >>>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>>>>
> >>>>>
> >>>>> ------------------------------
> >>>>>
> >>>>> End of ARM-allstar Digest, Vol 63, Issue 14
> >>>>> *******************************************
> >>>>
> >>>> _______________________________________________
> >>>>
> >>>> ARM-allstar mailing list
> >>>> ARM-allstar at hamvoip.org
> >>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>>>
> >>>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >>>
> >>> _______________________________________________
> >>>
> >>> ARM-allstar mailing list
> >>> ARM-allstar at hamvoip.org
> >>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>>
> >>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >> _______________________________________________
> >>
> >> ARM-allstar mailing list
> >> ARM-allstar at hamvoip.org
> >> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>
> >> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >>
> >>
> >> ------------------------------
> >>
> >> Subject: Digest Footer
> >>
> >> _______________________________________________
> >> ARM-allstar mailing list
> >> ARM-allstar at hamvoip.org
> >> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>
> >>
> >> ------------------------------
> >>
> >> End of ARM-allstar Digest, Vol 63, Issue 15
> >> *******************************************
> >
> >
> >
> > ------------------------------
> >
> > Subject: Digest Footer
> >
> > _______________________________________________
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> >
> > ------------------------------
> >
> > End of ARM-allstar Digest, Vol 63, Issue 16
> > *******************************************
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>

More information about the ARM-allstar mailing list