[arm-allstar] help with private node setup

Sun Aug 4 01:09:51 EDT 2019

Tom,

 As long as you have a public node registered and you are passing status
the private nodes will get forwarded. So at the moment the only way to
avoid them being seen is to either not have any public nodes or not update
status. We have it on our list for a future update to make the status
updates of private nodes optional with a command.

*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Sat, Aug 3, 2019 at 8:15 PM "Tom Eaton via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> I did thank you very much, but can you tell me when I connect the private
> node to a public node how to make it not show the private node on the
> public nodes bubble chart or LS nodes
>
> Tom, KC4CBQ
>
> On Sat, Aug 3, 2019, 7:22 PM "Doug Crompton via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > Yes, if you are not registered you would not get dns lookup. I think you
> > found your problem though in the nodes stanza statement.
> >
> >
> > *73 Doug*
> >
> > *WA3DSP*
> >
> > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> >
> > On Sat, Aug 3, 2019 at 7:19 PM "Tom Eaton via ARM-allstar" <
> > arm-allstar at hamvoip.org> wrote:
> >
> > > I tried that Doug and still no lookup, I have this set to not register
> > with
> > > Allstar.
> > > Any other thoughts about what I mite be doing wrong?
> > >
> > > And this is what I get from CLI David
> > >
> > >
> > >
> > >
> > >
> =========================================================================
> > > Connected to Asterisk
> > 1.4.23-pre.hamvoip-V1.5.3-58-app_rpt-0.327-07/22/2019
> > > currently running on KC4CBQ (pid = 343)
> > > Verbosity was 3 and is now 4
> > > KC4CBQ*CLI> rpt lookup 47862
> > > Node:  1111, Method:   DNS, Actual: LOCAL, Data:
> > > radio at 192.168.1.54:4570/47862,NONE
> > > Node:  1999, Method:   DNS, Actual: LOCAL, Data:
> > > radio at 192.168.1.54:4570/47862,NONE
> > >     -- Remote UNIX connection
> > >     -- Remote UNIX connection disconnected
> > >   == Manager 'admin' logged on from 127.0.0.1
> > >   == Manager 'admin' logged off from 127.0.0.1
> > >   == Manager 'admin' logged on from 127.0.0.1
> > >   == Manager 'admin' logged off from 127.0.0.1
> > >     -- Call accepted by 192.168.1.54 (format g726aal2)
> > >     -- Format for call is g726aal2
> > >     -- Hungup 'IAX2/192.168.1.54:4570-5410'
> > >     -- Hungup 'DAHDI/pseudo-1925244378'
> > >     -- Hungup 'DAHDI/pseudo-1662221725'
> > >     -- <DAHDI/pseudo-1375522655> Playing 'rpt/node' (language 'en')
> > >     -- <DAHDI/pseudo-1375522655> Playing 'digits/4' (language 'en')
> > >     -- <DAHDI/pseudo-1375522655> Playing 'digits/7' (language 'en')
> > >   == Refreshing DNS lookups.
> > >   == Refreshing DNS lookups.
> > >     -- <DAHDI/pseudo-1375522655> Playing 'digits/8' (language 'en')
> > >     -- <DAHDI/pseudo-1375522655> Playing 'digits/6' (language 'en')
> > >     -- <DAHDI/pseudo-1375522655> Playing 'digits/2' (language 'en')
> > >     -- <DAHDI/pseudo-1375522655> Playing 'rpt/connection_failed'
> > (language
> > > 'en')
> > >     -- Hungup 'DAHDI/pseudo-1375522655'
> > >     -- Remote UNIX connection
> > >     -- Remote UNIX connection disconnected
> > >   == Manager 'admin' logged on from 127.0.0.1
> > >   == Manager 'admin' logged off from 127.0.0.1
> > > KC4CBQ*CLI>
> > > Tom
> > >
> > > On Sat, Aug 3, 2019 at 5:07 PM "Doug Crompton via ARM-allstar" <
> > > arm-allstar at hamvoip.org> wrote:
> > >
> > > > Tom,
> > > >
> > > >  You are trying to do a local lookup for a public node.  If you want
> to
> > > do
> > > > this leave the node_lookup_method set to dns and specify the 1111 IP
> > > > address and port explicitly in the [nodes] section at the end of
> > > rpt.conf.
> > > >
> > > >
> > > > *73 Doug*
> > > >
> > > > *WA3DSP*
> > > >
> > > > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio
> >*
> > > >
> > > > On Sat, Aug 3, 2019 at 5:04 PM "Tom Eaton via ARM-allstar" <
> > > > arm-allstar at hamvoip.org> wrote:
> > > >
> > > > > I used node-config.sh
> > > > > node number 1111
> > > > > here is what I have in conf files
> > > > >
> > > > > extensions.conf
> > > > >
> > > > > [radio-secure]
> > > > > exten => 1111,1,rpt,1111
> > > > >
> > > > > iax.conf
> > > > > [general]
> > > > > bindport=4568
> > > > > bindaddr=0.0.0.0
> > > > >
> > > > > rpt.conf
> > > > >
> > > > > node_lookup_method=local
> > > > >
> > > > > 47862 = radio at 192.168.1.54:4570/47862,NONE ; this is he node to
> > lookup
> > > > >
> > > > > when I do a lookup I get
> > > > >
> > > > > AllStar Node Number Search for: "47862"
> > > > > ---------------------------------------
> > > > >
> > > > > ....Nothing Found....
> > > > >
> > > > >
> > > > > Can someone help me
> > > > >
> > > > >
> > > > > Tom
> > > > > _______________________________________________
> > > > >
> > > > > ARM-allstar mailing list
> > > > > ARM-allstar at hamvoip.org
> > > > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > > > >
> > > > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > > > >
> > > > _______________________________________________
> > > >
> > > > ARM-allstar mailing list
> > > > ARM-allstar at hamvoip.org
> > > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > > >
> > > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > > >
> > > _______________________________________________
> > >
> > > ARM-allstar mailing list
> > > ARM-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > >
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>