[arm-allstar] Issue with TXCTCSS Control

[David McGough]

Brad,

So, you are you trying to selectively recognize and repeat multiple PL
tones (like a community tone panel)?? ....But, not all PL tones?

If this is your usage scenario, how many tones are you trying to recognize 
and pass?

73, David KB4FXC



On Mon, 29 Apr 2019, Brad Trogdon wrote:

> Thanks for the info David.   When I activate the feature where would I
> define the specific PL’s to be blocked or allowed?
> 
> Example want to block PL of 100.0 but permit 141.3.
> 
> -Brad
> 
> On Mon, Apr 29, 2019 at 10:25 AM David McGough <kb4fxc at inttek.net> wrote:
> 
> >
> > Hi Brad,
> >
> > You should be able to filter out ALL DCS/PL tones which have been
> > received by the GM300. Then, there would be no "rogue" tones passing
> > through asterisk/allstar to cause problems.
> >
> > To enable the simpleusb brick-wall filter, set dcsfilter=yes in the
> > simpleusb.conf stanza for the node.
> >
> > Note this setting can be real-time toggled in the simpleusb-tune-menu
> > program, option q.
> >
> > There is also the original simpleusb PL filter. It's less aggressive,
> > letting a little more low-end audio through. Turn is on with plfilter=yes
> > in the simpleusb.conf stanza for the node.
> >
> > Note this setting can be real-time toggled in the simpleusb-tune-menu
> > program, option h.
> >
> > 73, David KB4FXC
> >
> >
> >
> > On Mon, 29 Apr 2019, Brad Trogdon wrote:
> >
> > > David,
> > >
> > > Your reply sparked a thought that you may have an answer to.   When
> > HamVoIP
> > > is used as a repeater controller between two Motorola GM-300's is it
> > > possible to reject (Not repeat) CTCSS tones received that are not
> > > defined?   This would be the fix for a issue I have an the inability to
> > use
> > > it as a stand alone controller.
> > >
> > > In my scenario we have other repeaters coordinated on same Freq and need
> > to
> > > prevent the distant traffic from opening the repeater.  If only a single
> > > tone we could address by adding PL to the Rec radio but more than one
> > tone
> > > is in play.
> > >
> > > Thanks in advance.
> > >
> > > -Brad
> > > ~~
> > >
> >
> >
>