[arm-allstar] Play ARN out Echolink connections
Doug Crompton
wa3dsp at gmail.com
Mon Apr 22 01:01:05 EDT 2019
LLoyd,
OK thanks for the test. We will do some more testing also but I really
find it hard to believe that this would have not been reported by now. As
far as I know nothing was changed in the Echolink channel driver that would
have caused this. Did this ever work for you? If it changed do you have
any idea when?
*73 Doug*
*WA3DSP*
*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
On Mon, Apr 22, 2019 at 12:42 AM Lloyd Duck <lduck at me.com> wrote:
> Doug,
>
> Duplex=2 doesn’t let the audio go out Echolink, same problem.
>
> Duplex=2 made it were my radio didn't keyup the repeater, RX didn't work
> but the repeater did still TX.
>
> Echolink audio was mixed into the playnews still.
>
> -----Original Message-----
> From: ARM-allstar <arm-allstar-bounces at hamvoip.org> On Behalf Of "Doug
> Crompton via ARM-allstar"
> Sent: Sunday, April 21, 2019 11:17 PM
> To: ARM Allstar <arm-allstar at hamvoip.org>
> Cc: Doug Crompton <wa3dsp at gmail.com>
> Subject: Re: [arm-allstar] Play ARN out Echolink connections
>
> Lloyd,
>
> Can you try duplex=2 and see if it works? I know the radio may need to be
> disconnected if it was not full duplex.
>
> Also does anyone else out there see this problem? Running duplex=1 with
> Echolink on the same node and when sending playback audio it is not going
> out to Echolink unless two Echolink nodes are connected and one keys up and
> then the other one hears the audio?
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
>
>
> On Sun, Apr 21, 2019 at 10:30 PM Doug Crompton <wa3dsp at gmail.com> wrote:
>
> > OK, That gives us something to test. Sounds strange and no one else has
> > reported this but we will look into it.
> >
> >
> > *73 Doug*
> >
> > *WA3DSP*
> >
> > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> >
> > On Sun, Apr 21, 2019 at 10:29 PM "Lloyd Duck via ARM-allstar" <
> > arm-allstar at hamvoip.org> wrote:
> >
> >> Doug,
> >>
> >>
> >>
> >> I just tested again with another ham using a second allstar node and
> also
> >> two Echolink connections as playnews plays.
> >>
> >>
> >>
> >> The audio plays out the allstar nodes and the repeater fine.
> >>
> >>
> >>
> >> The Echolink connection could not hear the playnews, but when we keyed
> up
> >> Echolink the audio from playnews mixes with the transmit audio from the
> >> other Echolink node and the playnews audio comes out.
> >>
> >>
> >>
> >> You can only hear the playnews on Echolink when someone keys up with an
> >> Echolink node connected to the allstar node playing playnews.
> >>
> >>
> >>
> >> From: Doug Crompton <wa3dsp at gmail.com>
> >> Sent: Sunday, April 21, 2019 8:52 PM
> >> To: Lloyd Duck <lduck at me.com>
> >> Cc: Doug Crompton <doug at crompton.com>; ARM Allstar <
> >> arm-allstar at hamvoip.org>
> >> Subject: Re: [arm-allstar] Play ARN out Echolink connections
> >>
> >>
> >>
> >> LLoyd,
> >>
> >>
> >>
> >> There is no separate setting for it to not go out over Echolink. So you
> >> are saying if an outside Allstar node is connected they hear it but if
> an
> >> outside Echolink is connected to this same node they do not? Have you
> >> confirmed this yourself? Does the Echolink node hear any audio? Can the
> >> connected Allstar node talk two way to the connected Echolink node?
> >>
> >>
> >>
> >>
> >> 73 Doug
> >>
> >> WA3DSP
> >>
> >> http://www.crompton.com/hamradio
> >>
> >>
> >>
> >> On Sun, Apr 21, 2019 at 9:42 PM Lloyd Duck <lduck at me.com <mailto:
> >> lduck at me.com> > wrote:
> >>
> >> Doug,
> >>
> >>
> >>
> >> That is not correct, I do have playnews audio out the repeater and out
> to
> >> any allstar node connected.
> >>
> >>
> >>
> >> Only place the audio is not going is out echolink. That’s why I’m
> >> thinking it’s just a simple setting that I’ve missed somewhere. It’s
> >> driving me a little nuts, I’ve looked over the conf files till it’s all
> >> looking the same now.
> >>
> >>
> >>
> >> rpt.conf, echolink.conf and simpleusb.conf, is there another one I
> should
> >> be looking at?
> >>
> >> Lloyd Duck, W5LND
> >>
> >>
> >> On Apr 21, 2019, at 8:33 PM, Doug Crompton <wa3dsp at gmail.com <mailto:
> >> wa3dsp at gmail.com> > wrote:
> >>
> >> LLoyd,
> >>
> >>
> >>
> >> So you are saying you have no playnews audio anywhere? Does it play at
> >> all? On Allstar when connected to another node?
> >>
> >>
> >>
> >>
> >> 73 Doug
> >>
> >> WA3DSP
> >>
> >> http://www.crompton.com/hamradio
> >>
> >>
> >>
> >> On Sun, Apr 21, 2019 at 6:45 PM Lloyd Duck <lduck at me.com <mailto:
> >> lduck at me.com> > wrote:
> >>
> >> Doug,
> >>
> >>
> >>
> >> I have the primary node set to duplex=1 and this is the node I’m able to
> >> get echolink to work on. I’m trying to do one step at a time. Audio
> comes
> >> out echolink no problem, just no audio from playing ARN. Once I get
> that to
> >> work I was wanting to move echolink to my second node.
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> Lloyd Duck, W5LND
> >>
> >>
> >> On Apr 21, 2019, at 4:37 PM, Doug Crompton via ARM-allstar <
> >> arm-allstar at hamvoip.org <mailto:arm-allstar at hamvoip.org> > wrote:
> >>
> >> LLoyd,
> >>
> >> The errors are basically meaningless and a collection over time. I
> >> think we went through this before but I forget the exact details. If
> you
> >> have a main node connected to a second node strictly for Echolink and
> they
> >> are connected all audio from the main node will go to the connected
> node.
> >> The exception is if you have the main node in duplex 0. In that case as
> I
> >> remember the global playback on that node will NOT go to the connected
> >> nodes. It will however play localplay on the node it is being played on
> to
> >> a radio or iaxrpt connection to that node if they exist. If you have
> >> anything in duplex=0, I would suspect that is the problem.
> >>
> >> If you connect via allstar (iaxrpt or whatever) to the node that
> Echolink
> >> is running on and you hear the playback audio then it has to also be
> going
> >> out over Echolink connections on that same node.
> >>
> >> I have this identical setup here with a hub and a second strictly
> Echolink
> >> node. I play ARN and ARRL news weekly. Neither the main hub node or the
> >> Echolink node are in duplex=0. If I were to put the hub in duplex=0 the
> >> audio would go no where. I know that because I tried at one time
> duplex=0
> >> thinking why play telemetry stuff on a node that has no radio and found
> >> out
> >> the hard way you can't do that.l
> >>
> >>
> >> *73 Doug*
> >>
> >> *WA3DSP*
> >>
> >> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> >>
> >>
> >>
> >> On Sun, Apr 21, 2019 at 2:27 PM "Lloyd Duck via ARM-allstar" <
> >> arm-allstar at hamvoip.org <mailto:arm-allstar at hamvoip.org> > wrote:
> >>
> >>
> >>
> >>
> >> I’m still not able to play Newsline out the Echolink connections, it
> plays
> >>
> >> just fine out the repeater and the allstar connected nodes.
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> I started all over and setup my node from scratch to make sure I hadn’t
> >>
> >> disable it myself. I believe I’m just missing something.
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> Here is a copy of my rpt.conf, I’m using the G for globe in the script.
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> /etc/asterisk/local/playnews/playnews-0.11 ARN now 46663 G &> /dev/null
> >> 2>&
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> Also I wanted to setup Echolink on my second node by using the
> >>
> >> dahdi/pseudo so I can disconnect it from allstar network if needed.
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> When I enter the 46664 for that node number in Echolink.conf I’m not
> able
> >>
> >> to connect using my Echolink app. The phone is on a different network.
> >>
> >>
> >>
> >> It works fine if I use 46663 node number.
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; WARNING - THIS FILE WAS AUTOMATICALLY CONFIGURED FROM A
> >>
> >>
> >>
> >> ; TEMPLATE FILE IN /usr/local/etc/asterisk_tpl BY THE
> >>
> >>
> >>
> >> ; NODE-CONFIG.SH SCRIPT.
> >>
> >>
> >>
> >> ;
> >>
> >>
> >>
> >> ; EACH TIME THIS SCRIPT IS RUN, THIS FILE WILL BE OVERWRITTEN.
> >>
> >>
> >>
> >> ; IF YOU CHANGE ANYTHING IN THIS FILE AND RUN THE NODE-CONFIG.SH
> >>
> >>
> >>
> >> ; SCRIPT, IT WILL BE LOST.
> >>
> >>
> >>
> >> ;
> >>
> >>
> >>
> >> ; IF YOU INTEND TO USE THE NODE-CONFIG.SH SCRIPT, THEN YOU SHOULD
> >>
> >>
> >>
> >> ; MAKE MODIFICATIONS TO THE ACTUAL TEMPLATE FILES LOCATED IN
> >>
> >>
> >>
> >> ; /usr/local/etc/asterisk_tpl directory.
> >>
> >>
> >>
> >> ;
> >>
> >>
> >>
> >> ; HAMVOIP Radio Repeater configuration file (for use with app_rpt)
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; This file is shown with two local nodes. The first node is
> >>
> >>
> >>
> >> ; assigned during the setup process. If you later want to change
> >>
> >>
> >>
> >> ; the node number use your editor to wholsale change the current
> >>
> >>
> >>
> >> ; node number to the new number. Also see the important note below.
> >>
> >>
> >>
> >> ;
> >>
> >>
> >>
> >> ; The nano editor does this nicely using the 'CNTRL \' command.
> >>
> >>
> >>
> >> ;
> >>
> >>
> >>
> >> ; Likewise do the same for node 46664 if you are using a second node.
> >>
> >>
> >>
> >> ; Node 46664 is defined as a pseudo node but could be setup as a second
> >>
> >>
> >>
> >> ; simpleusb node.
> >>
> >>
> >>
> >> ;
> >>
> >>
> >>
> >> ; This file defaults to a simplex node (duplex=1)
> >>
> >>
> >>
> >> ;
> >>
> >>
> >>
> >> ; Lines with a ';' first character in this file are comments and
> >>
> >>
> >>
> >> ; are NOT executed. Values shown are typically defaults meaning
> >>
> >>
> >>
> >> ; if the command is commented out the value shown would be used.
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; IMPORTANT NOTE - when changing node 46664 to a second node or
> >>
> >>
> >>
> >> ; adding a node the context mapping section and contexts below
> >>
> >>
> >>
> >> ; the last node stanza should reflect the FIRST node number at
> >>
> >>
> >>
> >> ; the end of their name unless you define separate stanza
> >>
> >>
> >>
> >> ; definitions for each node.
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; Updated 1/2019 to include additional features
> >>
> >>
> >>
> >> ; Before attempting to add features ensure they
> >>
> >>
> >>
> >> ; are not already installed in this file.
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; THIS IS AN IMPORTANT FILE! EDIT CAREFULLY AND
> >>
> >>
> >>
> >> ; MAKE A BACKUP FIRST!
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; The first node definition
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> [46663] ; Change this to your assigned node number
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; CHANNEL DRIVER SETTINGS
> >>
> >>
> >>
> >> ; Define a channel driver to use and
> which
> >>
> >>
> >>
> >> ; interface within that channel driver
> >>
> >>
> >>
> >> ; To define a radioless node use the
> >>
> >>
> >>
> >> ; psuedo channel driver -
> >>
> >> rxchannel=dahdi/pseudo
> >>
> >>
> >>
> >> ;rxchannel=Radio/usb46663
> >>
> >>
> >>
> >> ; Example usbradio channel driver
> >>
> >>
> >>
> >> rxchannel=SimpleUSB/usb
> >>
> >>
> >>
> >> ; Example simpleusb channel driver
> >>
> >>
> >>
> >> ;rxchannel=dahdi/pseudo
> >>
> >>
> >>
> >> ; Example pseudo channel driver
> >>
> >>
> >>
> >> ;rxchannel=iopipe/stanza1
> >>
> >>
> >>
> >> ; Future hamvoip IOpipe channel driver
> >>
> >>
> >>
> >> ; stanza1 rename to actual stanza name in
> >>
> >> iopipe.conf file
> >>
> >>
> >>
> >> ;txchannel=
> >>
> >>
> >>
> >> ; The txchannel allows separate sound
> >>
> >> cards for the
> >>
> >>
> >>
> >> ; receive and transmit audio paths. This
> >>
> >> is seldom used
> >>
> >>
> >>
> >> ; but shown here to make the user aware
> of
> >>
> >> its existence.
> >>
> >>
> >>
> >> ; It would take the same parameters as
> >>
> >> rxchannel.
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; NODE LOOKUP METHODS
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; There are three choices for the way to
> >>
> >> lookup
> >>
> >>
> >>
> >> ; nodes. Being able to lookup nodes and
> >>
> >> mapping
> >>
> >>
> >>
> >> ; to an IP address and port is a
> >>
> >> requirement
> >>
> >>
> >>
> >> ; for proper operation of Allstar.
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; NOTE - when using DNS lookup on all
> >>
> >> nodes on
> >>
> >>
> >>
> >> ; a server the filelookup_onoff.sh script
> >>
> >> should
> >>
> >>
> >>
> >> ; be used to turn off redundant flat file
> >>
> >> lookups.
> >>
> >>
> >>
> >> ; DNS lookup is the default.
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; node_lookup_method=dns (Default)
> >>
> >>
> >>
> >> ; Uses hamvoip DNS lookup
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; node_lookup_method=file
> >>
> >>
> >>
> >> ; Uses Allstar flat file lookup
> >>
> >>
> >>
> >> ; Deprecated in hamvoip v1.5
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; node_lookup_method=local
> >>
> >>
> >>
> >> ; Uses local fixed routing defined in
> the
> >>
> >>
> >>
> >> ; [nodes] stanza below
> >>
> >>
> >>
> >> node_lookup_method=dns
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; REPEATER/SIMPLEX NODE SETTINGS
> >>
> >>
> >>
> >> ; duplex=0 - Half duplex with no
> telemetry
> >>
> >>
> >>
> >> ; tones or hang time. Special Case: Full
> >>
> >>
> >>
> >> ; duplex if linktolink is set to yes.
> >>
> >>
> >>
> >> ; This mode is preferred when interfacing
> >>
> >>
> >>
> >> ; with an external multiport repeater
> >>
> >> controller.
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; duplex=1 - Half duplex with telemetry
> >>
> >> tones
> >>
> >>
> >>
> >> ; and hang time. Does not repeat audio.
> >>
> >>
> >>
> >> ; This mode is preferred when
> interfacing a
> >>
> >>
> >>
> >> ; simplex node. This is the default mode.
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; duplex=2 - Full Duplex with telemetry
> >>
> >> tones
> >>
> >>
> >>
> >> ; and hang time. This mode is preferred
> >>
> >> when
> >>
> >>
> >>
> >> ; interfacing a repeater.
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; duplex=3 - Full Duplex with telemetry
> >>
> >> tones
> >>
> >>
> >>
> >> ; and hang time, but no repeated audio.
> >>
> >> Often
> >>
> >>
> >>
> >> ; used for radio-less nodes.
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; duplex=4 - Full Duplex with telemetry
> >>
> >> tones
> >>
> >>
> >>
> >> ; and hang time. Repeated audio only when
> >>
> >> the
> >>
> >>
> >>
> >> ; autopatch is down.
> >>
> >>
> >>
> >> duplex=1
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; CONTEXT MAPPING
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> controlstates=controlstates46663
> >>
> >>
> >>
> >> ; Defines groups of control operator
> >>
> >> commands
> >>
> >>
> >>
> >> ; to be executed all at once. Can be
> >>
> >> combined
> >>
> >>
> >>
> >> ; with macros to allow changes to a nodes
> >>
> >>
> >>
> >> ; operating mode to be made quickly.
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> scheduler=schedule46663
> >>
> >>
> >>
> >> ; Defines macros to be executed at a
> >>
> >> specific
> >>
> >>
> >>
> >> ; time and date. Uses a cron-like syntax
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> morse=morse46663
> >>
> >>
> >>
> >> ; Contains definitions for morse code
> >>
> >> messages.
> >>
> >>
> >>
> >> ; One common morse stanza is shared
> across
> >>
> >>
> >>
> >> ; multiple nodes
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> macro=macro46663
> >>
> >>
> >>
> >> ; Defines DTMF macro sequences
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> functions=functions46663
> >>
> >>
> >>
> >> ; Defines DTMF function digit sequences.
> A
> >>
> >>
> >>
> >> ; function stanza has a reference to it
> >>
> >> defined
> >>
> >>
> >>
> >> ; inside a node stanza. Multiple function
> >>
> >> stanzas
> >>
> >>
> >>
> >> ; may be defined and used to provide
> >>
> >> different
> >>
> >>
> >>
> >> ; function lists for different sources
> >>
> >>
> >>
> >> ; (radio.phone, and link)
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> phone_functions=functions46663
> >>
> >>
> >>
> >> link_functions=functions46663
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> telemetry=telemetry46663
> >>
> >>
> >>
> >> ; Contains definitions for telemetry
> tones
> >>
> >>
> >>
> >> ; (courtesy tones, roger beeps, etc). A
> >>
> >> telemetry
> >>
> >>
> >>
> >> ; stanza has a reference to it defined
> >>
> >> inside
> >>
> >>
> >>
> >> ; a node stanza.
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> wait_times=wait-times46663
> >>
> >>
> >>
> >> ; Contains time delays used to time audio
> >>
> >>
> >>
> >> ; telemetry events
> >>
> >>
> >>
> >> events=events46663
> >>
> >>
> >>
> >> ; Allstar events
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; ECHOLINK SETTINGS
> >>
> >>
> >>
> >> ; Echolink is a separate module.
> >>
> >>
> >>
> >> ; The Echolink.conf file must be
> >>
> >>
> >>
> >> ; configured for it to function
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> erxgain=-3
> >>
> >>
> >>
> >> ; Echoline RX gain in dB
> >>
> >>
> >>
> >> etxgain=3
> >>
> >>
> >>
> >> ; Echolink TX gain in dB
> >>
> >>
> >>
> >> eannmode=2
> >>
> >>
> >>
> >> ; Echolink announcement mode
> >>
> >>
> >>
> >> ; Default: 1 = Say only node number on
> >>
> >> echolink
> >>
> >>
> >>
> >> ; connects. 2 = say phonetic call sign
> >>
> >> only on
> >>
> >>
> >>
> >> ; echolink connects. 3 = say phonetic
> call
> >>
> >> sign
> >>
> >>
> >>
> >> ; and node number on echolink connects
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; IRLP SETTINGS
> >>
> >>
> >>
> >> ; IRLP is a separate hamvoip package
> which
> >>
> >> must
> >>
> >>
> >>
> >> ; be installed and configured for it to
> be
> >>
> >>
> >>
> >> ; functional.
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> irxgain=-6
> >>
> >>
> >>
> >> ; IRLP receive gain adjustment
> >>
> >>
> >>
> >> itxgain=4
> >>
> >>
> >>
> >> ; IRLP transmit gain adjustment
> >>
> >>
> >>
> >> irlpann=0
> >>
> >>
> >>
> >> ; Default: 1 = Play irlp connect and
> >>
> >> disconnect
> >>
> >>
> >>
> >> ; announcements
> >>
> >>
> >>
> >> ; 0 = Disable irlp connect and
> >>
> >> disconnect
> >>
> >>
> >>
> >> ; announcements
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; AUDIO LEVEL SETTINGS IN dB
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> telemnomdb=0
> >>
> >>
> >>
> >> ; Overall reduction in telemetry level
> >>
> >>
> >>
> >> telemduckdb=-9
> >>
> >>
> >>
> >> ; Telemetry level reduction with signal
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; NOTCH FILTER
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ;rxnotch=1000,20
> >>
> >>
> >>
> >> ; Apply a notch to filter the RX signal.
> >>
> >> Values are:
> >>
> >>
> >>
> >> ; frequency, bandwidth. Up to ten filters
> >>
> >> can be cascaded.
> >>
> >>
> >>
> >> ; Example of three cascaded filters at
> >>
> >> 1000hz
> >>
> >>
> >>
> >> ; 20hz bandwidth:
> >>
> >> rxnotch=1000,20,1000,20,1000,20
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; DIAL PLAN SETTINGS
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> context = radio
> >>
> >>
> >>
> >> callerid = Repeater <0000046663>
> >>
> >>
> >>
> >> ; This setting allows the autopatch on
> >>
> >>
> >>
> >> ; the node to be identified with a
> specific
> >>
> >>
> >>
> >> ; caller ID
> >>
> >>
> >>
> >> accountcode=RADIO
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; ID SETTINGS
> >>
> >>
> >>
> >> ; ID recording files must have extension
> >>
> >> gsm,ulaw,pcm,
> >>
> >>
> >>
> >> ; or wav. No file extension is used.
> >>
> >>
> >>
> >> ; All ID recording files should be
> sampled
> >>
> >> at 8KH
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ;idrecording=/etc/asterisk/local/node-id
> >>
> >>
> >>
> >> ; Main ID voice
> >>
> >>
> >>
> >> ;idrecording=|iDE W5LND/L
> >>
> >>
> >>
> >> ; Main ID CW
> >>
> >>
> >>
> >> ;idtalkover=|iDE W5LND/L
> >>
> >>
> >>
> >> ; ID when signal present
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> idrecording=/etc/asterisk/local/node-id
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; TIME SETTINGS - milliseconds
> >>
> >>
> >>
> >> ; The default values for hangtime,
> >>
> >> tx_timeout,
> >>
> >>
> >>
> >> ; and id interval time are ; 5 seconds
> >>
> >> (5000 ms),
> >>
> >>
> >>
> >> ; 3 minutes (180000 ms), and 5 minutes
> >>
> >> (300000 ms)
> >>
> >>
> >>
> >> ; respectively
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> hangtime=100
> >>
> >>
> >>
> >> ; squelch tail hang time (in ms)
> >>
> >>
> >>
> >> althangtime=100
> >>
> >>
> >>
> >> ; This controls the length of the node
> >>
> >> hang time
> >>
> >>
> >>
> >> ; when the alternate hang timer is
> >>
> >> selected with
> >>
> >>
> >>
> >> ; a control operator function.
> >>
> >>
> >>
> >> tx_timeout=240000
> >>
> >>
> >>
> >> ; changed from totime V1.3
> >>
> >>
> >>
> >> idtime=600000
> >>
> >>
> >>
> >> ; ID every 10 minutes
> >>
> >>
> >>
> >> politeid=30000
> >>
> >>
> >>
> >> ; The politeid setting specified the
> >>
> >> number of
> >>
> >>
> >>
> >> ; milliseconds prior to the end of the id
> >>
> >> cycle
> >>
> >>
> >>
> >> ; where the controller will attempt to
> >>
> >> play the
> >>
> >>
> >>
> >> ; ID in the tail when a user unkeys. If
> the
> >>
> >>
> >>
> >> ; controller does not get a chance to
> send
> >>
> >> the
> >>
> >>
> >>
> >> ; ID in the tail, the ID will be played
> >>
> >> over
> >>
> >>
> >>
> >> ; the top of the user transmission.
> >>
> >>
> >>
> >> rx_timeout=300000
> >>
> >>
> >>
> >> ; Timeout on hardware COS. Used to avoid
> >>
> >> hangup
> >>
> >>
> >>
> >> ; of circuits with COS lockup.
> >>
> >>
> >>
> >> rx_cosflap=20
> >>
> >>
> >>
> >> ; Minimum COS Timeout reset period. Used
> to
> >>
> >>
> >>
> >> ; avoid resseting of rx_timeout with a
> >>
> >> flapping
> >>
> >>
> >>
> >> ; squelch.
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; COURTESY TONE MAPPING
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> unlinkedct=ct1
> >>
> >>
> >>
> >> ; Sent when not connected to another node
> >>
> >>
> >>
> >> remotect=ct3
> >>
> >>
> >>
> >> ; Sent when remote base connected
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; The linkunkeyct command can be used to
> >>
> >>
> >>
> >> ; customize the courtesy tone based on
> >>
> >>
> >>
> >> ; a node number. This is useful to
> identify
> >>
> >>
> >>
> >> ; input from a specific node. See the
> >>
> >>
> >>
> >> ; howto at hamvoip.org <
> http://hamvoip.org>
> >> for details.
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> linkunkeyct=ct8
> >>
> >>
> >>
> >> ; sent when a network user unkeys. This
> >>
> >>
> >>
> >> ; method uses the mapped tone for all
> >>
> >> nodes.
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ;linkunkeyct=by_node_number,ct8
> >>
> >>
> >>
> >> ; Use this method to send a distinct
> >>
> >> courtesy
> >>
> >>
> >>
> >> ; tone based on node number. If node
> >>
> >> number is
> >>
> >>
> >>
> >> ; not defined use the default tone shown
> >>
> >> here
> >>
> >>
> >>
> >> ; as ct8. Comment the linkunkeyct=ct8
> above
> >>
> >>
> >>
> >> ; when using this method. See the howto
> on
> >>
> >> this
> >>
> >>
> >>
> >> ; at hamvoip.org <http://hamvoip.org>
> >> for additional
> >>
> >> information.
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ;node40000=ct12
> >>
> >>
> >>
> >> ; Define node number to mapped tone for
> >>
> >>
> >>
> >> ; distinctive courtesy tone. Multiple
> nodes
> >>
> >>
> >>
> >> ; can be mapped to multiple mappings by
> >>
> >> adding
> >>
> >>
> >>
> >> ; additional nodexxxxx=ctxx lines. ctxx
> >>
> >> tones
> >>
> >>
> >>
> >> ; must be defined in the [telemetry]
> stanza
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; LINK SETTINGS - values in seconds
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ;nolocallinkct=0
> >>
> >>
> >>
> >> ; Send unlinkedct instead of linkedct if
> >>
> >>
> >>
> >> ; another local node is connected to this
> >>
> >>
> >>
> >> ; node (hosted on the same server).
> >>
> >>
> >>
> >> ;lnkactenable=0
> >>
> >>
> >>
> >> ; The link activity timer may be used to
> >>
> >> reset
> >>
> >>
> >>
> >> ; a link configuration back to a default
> >>
> >>
> >>
> >> ; configuration if a user changes how the
> >>
> >> node
> >>
> >>
> >>
> >> ; is linked. This helps in situations
> >>
> >> where the
> >>
> >>
> >>
> >> ; user forgets to reset the system to the
> >>
> >> default
> >>
> >>
> >>
> >> ; values, or drives out of range.
> >>
> >>
> >>
> >> ;lnkacttime=1800
> >>
> >>
> >>
> >> ; This sets the amount of time to wait
> >>
> >> before
> >>
> >>
> >>
> >> ; executing the inactivity macro. Set to
> a
> >>
> >> value
> >>
> >>
> >>
> >> ; between 180 and 2000000 seconds.
> >>
> >>
> >>
> >> ;lnkactmacro=*52
> >>
> >>
> >>
> >> ; This is the function to execute when
> the
> >>
> >> activity
> >>
> >>
> >>
> >> ; timer expires. This can either be a
> >>
> >> function or
> >>
> >>
> >>
> >> ; another macro defined in the [macros]
> >>
> >> stanza.
> >>
> >>
> >>
> >> ;lnkacttimerwarn=30seconds
> >>
> >>
> >>
> >> ; For a 30 second warning message, set
> >>
> >> this to the
> >>
> >>
> >>
> >> ; path of a ulaw or pcm sound file to
> play
> >>
> >> locally
> >>
> >>
> >>
> >> ; when there is 30 seconds left on the
> >>
> >> activity timer.
> >>
> >>
> >>
> >> ; Defualts to /var/lib/asterisk/sounds
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; REMOTE SETTINGS - values in seconds
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ;remote_inact_timeout=1800
> >>
> >>
> >>
> >> ; Specifies the amount of time without
> >>
> >> keying
> >>
> >>
> >>
> >> ; from the link. Set to 0 to disable
> >>
> >> timeout.
> >>
> >>
> >>
> >> ;remote_timeout=3600
> >>
> >>
> >>
> >> ; Specifies the amount of time without
> >>
> >> keying from
> >>
> >>
> >>
> >> ; the link. Set to 0 to disable timeout.
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; LONG TONE ZERO DTMF
> >>
> >>
> >>
> >> ; LiTZ is a simple method to indicate to
> >>
> >> others on
> >>
> >>
> >>
> >> ; an amateur VHF / UHF FM radio frequency
> >>
> >> that you
> >>
> >>
> >>
> >> ; have an immediate need to communicate
> >>
> >> with someone,
> >>
> >>
> >>
> >> ; anyone, regarding a priority situation
> >>
> >> or condition.
> >>
> >>
> >>
> >> ; This command can call any DTMF function
> >>
> >> which could
> >>
> >>
> >>
> >> ; then call a script or program. It does
> >>
> >> not have to
> >>
> >>
> >>
> >> ; use the autopatch.
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ;litzcmd=*6911
> >>
> >>
> >>
> >> ; Command sequnce -- Call 911 on
> autopatch
> >>
> >>
> >>
> >> ;litztime=3000
> >>
> >>
> >>
> >> ; time required to hold down DTMF,
> >>
> >> defaults to 3000 ms
> >>
> >>
> >>
> >> ;litzchar=0
> >>
> >>
> >>
> >> ; DTMF character to activate LITZ,
> defauls
> >>
> >> to 0
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; MISC. SETTINGS
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> parrot=0 ; One time parrot modr with DTMF A9
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ;connpgm=yourconnectprogram
> >>
> >>
> >>
> >> ; Program or script to run at connection
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ;connpgm=/usr/local/sbin/supermon/smlogger 1 ; use this line for
> Supermon
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ;discpgm=yourdisconnectprogram
> >>
> >>
> >>
> >> ; Program or script to run at
> disconnection
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ;discpgm=/usr/local/sbin/supermon/smlogger 0 ; use this line for
> Supermon
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> nounkeyct=0
> >>
> >>
> >>
> >> ; Disable courtest tones (=1)
> >>
> >>
> >>
> >> holdofftelem=1
> >>
> >>
> >>
> >> ; Do not make announcements over user
> voice
> >>
> >>
> >>
> >> telemdefault=2
> >>
> >>
> >>
> >> ; 0= voice telemetry off, 1= on,
> >>
> >>
> >>
> >> ; 2= Only your telemetry actions
> >>
> >>
> >>
> >> ; then mutes in 1 minute
> >>
> >>
> >>
> >> beaconing=0
> >>
> >>
> >>
> >> ; When set to 1 will send the repeater ID
> >>
> >> at
> >>
> >>
> >>
> >> ; the idtime interval regardless of
> whether
> >>
> >>
> >>
> >> ; there was repeater activity or not.
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ;funcchar = *
> >>
> >>
> >>
> >> ; function lead-in character (defaults to
> >>
> >> '*')
> >>
> >>
> >>
> >> ;endchar = #
> >>
> >>
> >>
> >> ; command mode end character (defaults to
> >>
> >> '#')
> >>
> >>
> >>
> >> ;nobusyout=yes
> >>
> >>
> >>
> >> ; (optional) Do not busy-out
> reverse-patch
> >>
> >> when
> >>
> >>
> >>
> >> ; normal patch in use
> >>
> >>
> >>
> >> ;notelemtx = yes
> >>
> >>
> >>
> >> ; telemetry output does not make main
> >>
> >>
> >>
> >> ; system transmit (optional)
> >>
> >>
> >>
> >> ;propagate_dtmf = yes
> >>
> >>
> >>
> >> ; DTMF sent to system from link gets
> >>
> >>
> >>
> >> ; repeated onto main system output
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ;propagate_phonedtmf = yes
> >>
> >>
> >>
> >> ; DTMF sent to system from phone gets
> >>
> >>
> >>
> >> ; repeated into main system output and
> >>
> >>
> >>
> >> ; link outputs (optional)
> >>
> >>
> >>
> >> ;linktolink = yes
> >>
> >>
> >>
> >> ; disables forcing physical half-duplex
> >>
> >>
> >>
> >> ; operation of main repeater while
> >>
> >>
> >>
> >> ; still keeping half-duplex semantics
> >>
> >>
> >>
> >> ;inxlat = #456,#457,0123456789ABCD
> >>
> >>
> >>
> >> ; translate digit strings inbound,
> >>
> >>
> >>
> >> ; in this case intrepret #456 as star,
> >>
> >>
> >>
> >> ; #457 as pound, and pass all the other
> >>
> >>
> >>
> >> ; chars listed in arg3 (optional)
> >>
> >>
> >>
> >> ;outxlat = *7,*0,0123456789#ABCD
> >>
> >>
> >>
> >> ; translate digit string outbound,
> >>
> >>
> >>
> >> ; in this case *7 generates star, *0
> >>
> >>
> >>
> >> ; generates pound, and all the other
> >>
> >>
> >>
> >> ; digits pass along
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ;extnodes = extnodes-different
> >>
> >>
> >>
> >> ; section in extnodefile containing
> >>
> >>
> >>
> >> ; dynamic node information (optional)
> >>
> >>
> >>
> >> ;extnodefile = different-file
> >>
> >>
> >>
> >> ; file containing dynamic node
> >>
> >>
> >>
> >> ; info (optional)
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ;archivedir = some-directory
> >>
> >>
> >>
> >> ; defines and enables activity recording
> >>
> >>
> >>
> >> ; into specified directory (optional)
> >>
> >>
> >>
> >> ;archiveaudio=0
> >>
> >>
> >>
> >> ; Disable saving audio files when
> >>
> >>
> >>
> >> ; archiving. Use with caution on SDcards
> >>
> >>
> >>
> >> ; This write a lot of data.
> >>
> >>
> >>
> >> ;archivetype=gsm
> >>
> >>
> >>
> >> ; Allows the selection of gsm (.wav) or
> >>
> >>
> >>
> >> ; pcm (.ul) for archiving audio files
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ;startup_macro = *7
> >>
> >>
> >>
> >> ; Macro to run at startup (optional)
> >>
> >>
> >>
> >> ;startup_macro_delay=5
> >>
> >>
> >>
> >> ; Time in seconds to wait before
> executing
> >>
> >>
> >>
> >> ; the startup macro
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; TAIL MESSAGE
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; The tailmessagetime,tailsquashedtime, and tailmessages need to be set
> >>
> >>
> >>
> >> ; to support tail messages. They can be omitted otherwise.
> >>
> >>
> >>
> >> ;
> >>
> >>
> >>
> >> ;tailmessagetime=1800000
> >>
> >>
> >>
> >> ; Play a tail message every 5 mins
> >>
> >>
> >>
> >> ;tailsquashedtime=120000
> >>
> >>
> >>
> >> ; If squashed by another user,
> >>
> >>
> >>
> >> ; try again after 30 seconds
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ;tailmessagelist=/etc/asterisk/local/some_file
> >>
> >>
> >>
> >> ;list of messages to be played for tail
> >>
> >> message
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; *** STATUS REPORTING ***
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; Uncomment the following two statpost lines to report the
> >>
> >>
> >>
> >> ; status of your node to stats.allstarlink.org <
> >> http://stats.allstarlink.org>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> statpost_program=/usr/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null
> >>
> >>
> >>
> >> statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; END OF FIRST NODE
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; BEGIN SECOND NODE
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; Second node shown as a pseudo node
> >>
> >>
> >>
> >> ; This node can be edited to include a second public or private node
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> [46664] ; Change this to your assigned node number
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; CHANNEL DRIVER SETTINGS
> >>
> >>
> >>
> >> ; Define a channel driver to use and
> which
> >>
> >>
> >>
> >> ; interface within that channel driver
> >>
> >>
> >>
> >> ; To define a radioless node use the
> >>
> >>
> >>
> >> ; psuedo channel driver -
> >>
> >> rxchannel=dahdi/pseudo
> >>
> >>
> >>
> >> ;rxchannel=Radio/usb46664
> >>
> >>
> >>
> >> ; Example usbradio channel driver
> >>
> >>
> >>
> >> ;rxchannel=SimpleUSB/usb2
> >>
> >>
> >>
> >> ; Example simpleusb channel driver
> >>
> >>
> >>
> >> ; Stanza for usb2 needs to be added to
> >>
> >> simpleusb..conf
> >>
> >>
> >>
> >> rxchannel=dahdi/pseudo
> >>
> >>
> >>
> >> ; Example pseudo channel driver
> >>
> >>
> >>
> >> ;rxchannel=iopipe/stanza1
> >>
> >>
> >>
> >> ; Future hamvoip IOpipe channel driver
> >>
> >>
> >>
> >> ; stanza1 rename to actual stanza name in
> >>
> >> iopipe.conf file
> >>
> >>
> >>
> >> ;txchannel=
> >>
> >>
> >>
> >> ; The txchannel allows separate sound
> >>
> >> cards for the
> >>
> >>
> >>
> >> ; receive and transmit audio paths. This
> >>
> >> is seldom used
> >>
> >>
> >>
> >> ; but shown here to make the user aware
> of
> >>
> >> its existence.
> >>
> >>
> >>
> >> ; It would take the same parameters as
> >>
> >> rxchannel.
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; NODE LOOKUP METHODS
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; There are three choices for the way to
> >>
> >> lookup
> >>
> >>
> >>
> >> ; nodes. Being able to lookup nodes and
> >>
> >> mapping
> >>
> >>
> >>
> >> ; to an IP address and port is a
> >>
> >> requirement
> >>
> >>
> >>
> >> ; for proper operation of Allstar.
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; NOTE - when using DNS lookup on all
> >>
> >> nodes on
> >>
> >>
> >>
> >> ; a server the filelookup_onoff.sh script
> >>
> >> should
> >>
> >>
> >>
> >> ; be used to turn off redundant flat file
> >>
> >> lookups.
> >>
> >>
> >>
> >> ; DNS lookup is the default.
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; node_lookup_method=dns (Default)
> >>
> >>
> >>
> >> ; Uses hamvoip DNS lookup
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; node_lookup_method=file
> >>
> >>
> >>
> >> ; Uses Allstar flat file lookup
> >>
> >>
> >>
> >> ; Deprecated in hamvoip v1.5
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; node_lookup_method=local
> >>
> >>
> >>
> >> ; Uses local fixed routing defined in
> the
> >>
> >>
> >>
> >> ; [nodes] stanza below
> >>
> >>
> >>
> >> node_lookup_method=dns
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; REPEATER/SIMPLEX NODE SETTINGS
> >>
> >>
> >>
> >> ; duplex=0 - Half duplex with no
> telemetry
> >>
> >>
> >>
> >> ; tones or hang time. Special Case: Full
> >>
> >>
> >>
> >> ; duplex if linktolink is set to yes.
> >>
> >>
> >>
> >> ; This mode is preferred when interfacing
> >>
> >>
> >>
> >> ; with an external multiport repeater
> >>
> >> controller.
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; duplex=1 - Half duplex with telemetry
> >>
> >> tones
> >>
> >>
> >>
> >> ; and hang time. Does not repeat audio.
> >>
> >>
> >>
> >> ; This mode is preferred when
> interfacing a
> >>
> >>
> >>
> >> ; simplex node. This is the default mode.
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; duplex=2 - Full Duplex with telemetry
> >>
> >> tones
> >>
> >>
> >>
> >> ; and hang time. This mode is preferred
> >>
> >> when
> >>
> >>
> >>
> >> ; interfacing a repeater.
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; duplex=3 - Full Duplex with telemetry
> >>
> >> tones
> >>
> >>
> >>
> >> ; and hang time, but no repeated audio.
> >>
> >> Often
> >>
> >>
> >>
> >> ; used for radio-less nodes
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; duplex=4 - Full Duplex with telemetry
> >>
> >> tones
> >>
> >>
> >>
> >> ; and hang time. Repeated audio only when
> >>
> >> the
> >>
> >>
> >>
> >> ; autopatch is down.
> >>
> >>
> >>
> >> duplex=3
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; CONTEXT MAPPING
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> controlstates=controlstates
> >>
> >>
> >>
> >> ; Defines groups of control operator
> >>
> >> commands
> >>
> >>
> >>
> >> ; to be executed all at once. Can be
> >>
> >> combined
> >>
> >>
> >>
> >> ; with macros to allow changes to a nodes
> >>
> >>
> >>
> >> ; operating mode to be made quickly.
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> scheduler=schedule46663
> >>
> >>
> >>
> >> ; Defines macros to be executed at a
> >>
> >> specific
> >>
> >>
> >>
> >> ; time and date. Uses a cron-like syntax
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> morse=morse46663
> >>
> >>
> >>
> >> ; Contains definitions for morse code
> >>
> >> messages.
> >>
> >>
> >>
> >> ; One common morse stanza is shared
> across
> >>
> >>
> >>
> >> ; multiple nodes
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> macro=macro46663
> >>
> >>
> >>
> >> ; Defines DTMF macro sequences
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> functions=functions46663
> >>
> >>
> >>
> >> ; Defines DTMF function digit sequences.
> A
> >>
> >>
> >>
> >> ; function stanza has a reference to it
> >>
> >> defined
> >>
> >>
> >>
> >> ; inside a node stanza. Multiple function
> >>
> >> stanzas
> >>
> >>
> >>
> >> ; may be defined and used to provide
> >>
> >> different
> >>
> >>
> >>
> >> ; function lists for different sources
> >>
> >>
> >>
> >> ; (radio.phone, and link)
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> phone_functions=functions46663
> >>
> >>
> >>
> >> link_functions=functions46663
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> telemetry=telemetry46663
> >>
> >>
> >>
> >> ; Contains definitions for telemetry
> tones
> >>
> >>
> >>
> >> ; (courtesy tones, roger beeps, etc). A
> >>
> >> telemetry
> >>
> >>
> >>
> >> ; stanza has a reference to it defined
> >>
> >> inside
> >>
> >>
> >>
> >> ; a node stanza.
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> wait_times=wait-times46663
> >>
> >>
> >>
> >> ; Contains time delays used to time audio
> >>
> >>
> >>
> >> ; telemetry events
> >>
> >>
> >>
> >> events=events46663
> >>
> >>
> >>
> >> ; Allstar events
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; ECHOLINK SETTINGS
> >>
> >>
> >>
> >> ; Echolink is a separate module.
> >>
> >>
> >>
> >> ; The Echolink.conf file must be
> >>
> >>
> >>
> >> ; configured for it to function
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> erxgain=-3
> >>
> >>
> >>
> >> ; Echoline RX gain in dB
> >>
> >>
> >>
> >> etxgain=3
> >>
> >>
> >>
> >> ; Echolink TX gain in dB
> >>
> >>
> >>
> >> ;eannmode=1
> >>
> >>
> >>
> >> ; Echolink announcement mode
> >>
> >>
> >>
> >> ; Default: 1 = Say only node number on
> >>
> >> echolink
> >>
> >>
> >>
> >> ; connects. 2 = say phonetic call sign
> >>
> >> only on
> >>
> >>
> >>
> >> ; echolink connects. 3 = say phonetic
> call
> >>
> >> sign
> >>
> >>
> >>
> >> ; and node number on echolink connects
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; IRLP SETTINGS
> >>
> >>
> >>
> >> ; IRLP is a separate hamvoip package
> which
> >>
> >> must
> >>
> >>
> >>
> >> ; be installed and configured for it to
> be
> >>
> >>
> >>
> >> ; functional.
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> irxgain=-6
> >>
> >>
> >>
> >> ; IRLP receive gain adjustment
> >>
> >>
> >>
> >> itxgain=4
> >>
> >>
> >>
> >> ; IRLP transmit gain adjustment
> >>
> >>
> >>
> >> irlpann=0
> >>
> >>
> >>
> >> ; Default: 1 = Play irlp connect and
> >>
> >> disconnect
> >>
> >>
> >>
> >> ; announcements
> >>
> >>
> >>
> >> ; 0 = Disable irlp connect and
> >>
> >> disconnect
> >>
> >>
> >>
> >> ; announcements
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; AUDIO LEVEL SETTINGS IN dB
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> telemnomdb=0
> >>
> >>
> >>
> >> ; Overall reduction in telemetry level
> >>
> >>
> >>
> >> telemduckdb=-9
> >>
> >>
> >>
> >> ; Telemetry level reduction with signal
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; NOTCH FILTER
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ;rxnotch=1000,20
> >>
> >>
> >>
> >> ; Apply a notch to filter the RX signal.
> >>
> >> Values are:
> >>
> >>
> >>
> >> ; frequency, bandwidth. Up to ten filters
> >>
> >> can be cascaded.
> >>
> >>
> >>
> >> ; Example of three cascaded filters at
> >>
> >> 1000hz
> >>
> >>
> >>
> >> ; 20hz bandwidth:
> >>
> >> rxnotch=1000,20,1000,20,1000,20
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; DIAL PLAN SETTINGS
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> context = radio
> >>
> >>
> >>
> >> callerid = Repeater <0000046663>
> >>
> >>
> >>
> >> ; This setting allows the autopatch on
> >>
> >>
> >>
> >> ; the node to be identified with a
> specific
> >>
> >>
> >>
> >> ; caller ID
> >>
> >>
> >>
> >> accountcode=RADIO
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; ID SETTINGS
> >>
> >>
> >>
> >> ; ID recording files must have extension
> >>
> >> gsm,ulaw,pcm,
> >>
> >>
> >>
> >> ; or wav. No file extension is used.
> >>
> >>
> >>
> >> ; All ID recording files should be
> sampled
> >>
> >> at 8KH
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> idrecording=/etc/asterisk/local/node-id
> >>
> >>
> >>
> >> ; Main ID voice
> >>
> >>
> >>
> >> ;idrecording=|iDE W5LND/L
> >>
> >>
> >>
> >> ; Main ID CW
> >>
> >>
> >>
> >> idtalkover=|iDE W5LND/L
> >>
> >>
> >>
> >> ; ID when signal present
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; TIME SETTINGS - milliseconds
> >>
> >>
> >>
> >> ; The default values for hangtime,
> >>
> >> tx_timeout,
> >>
> >>
> >>
> >> ; and id interval time are ; 5 seconds
> >>
> >> (5000 ms),
> >>
> >>
> >>
> >> ; 3 minutes (180000 ms), and 5 minutes
> >>
> >> (300000 ms)
> >>
> >>
> >>
> >> ; respectively
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> hangtime=100
> >>
> >>
> >>
> >> ; squelch tail hang time (in ms)
> >>
> >>
> >>
> >> althangtime=100
> >>
> >>
> >>
> >> ; This controls the length of the node
> >>
> >> hang time
> >>
> >>
> >>
> >> ; when the alternate hang timer is
> >>
> >> selected with
> >>
> >>
> >>
> >> ; a control operator function.
> >>
> >>
> >>
> >> tx_timeout=240000
> >>
> >>
> >>
> >> ; changed from totime V1.3
> >>
> >>
> >>
> >> idtime=600000
> >>
> >>
> >>
> >> ; ID every 10 minutes
> >>
> >>
> >>
> >> politeid=30000
> >>
> >>
> >>
> >> ; The politeid setting specified the
> >>
> >> number of
> >>
> >>
> >>
> >> ; milliseconds prior to the end of the id
> >>
> >> cycle
> >>
> >>
> >>
> >> ; where the controller will attempt to
> >>
> >> play the
> >>
> >>
> >>
> >> ; ID in the tail when a user unkeys. If
> the
> >>
> >>
> >>
> >> ; controller does not get a chance to
> send
> >>
> >> the
> >>
> >>
> >>
> >> ; ID in the tail, the ID will be played
> >>
> >> over
> >>
> >>
> >>
> >> ; the top of the user transmission.
> >>
> >>
> >>
> >> rx_timeout=300000
> >>
> >>
> >>
> >> ; Timeout on hardware COS. Used to avoid
> >>
> >> hangup
> >>
> >>
> >>
> >> ; of circuits with COS lockup.
> >>
> >>
> >>
> >> rx_cosflap=20
> >>
> >>
> >>
> >> ; Minimum COS Timeout reset period. Used
> to
> >>
> >>
> >>
> >> ; avoid resseting of rx_timeout with a
> >>
> >> flapping
> >>
> >>
> >>
> >> ; squelch.
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; COURTESY TONE MAPPING
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> unlinkedct=ct2
> >>
> >>
> >>
> >> ; Sent when not connected to another node
> >>
> >>
> >>
> >> remotect=ct3
> >>
> >>
> >>
> >> ; Sent when remote base connected
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> linkunkeyct=ct8
> >>
> >>
> >>
> >> ; sent when a network user unkeys. This
> >>
> >>
> >>
> >> ; method uses the mapped tone for all
> >>
> >> nodes.
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ;linkunkeyct=by_node_number,ct8
> >>
> >>
> >>
> >> ; Use this method to send a distinct
> >>
> >> courtesy
> >>
> >>
> >>
> >> ; tone based on node number. If node
> >>
> >> number is
> >>
> >>
> >>
> >> ; not defined use the default tone shown
> >>
> >> here
> >>
> >>
> >>
> >> ; as ct8. Comment the linkunkeyct=ct8
> above
> >>
> >>
> >>
> >> ; when using this method. See the howto
> on
> >>
> >> this
> >>
> >>
> >>
> >> ; at hamvoip.org <http://hamvoip.org>
> >> for additional
> >>
> >> information.
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ;node40000=ct12
> >>
> >>
> >>
> >> ; Define node number to mapped tone for
> >>
> >>
> >>
> >> ; distinctive courtesy tone. Multiple
> nodes
> >>
> >>
> >>
> >> ; can be mapped to multiple mappings by
> >>
> >> adding
> >>
> >>
> >>
> >> ; additional nodexxxxx=ctxx lines. ctxx
> >>
> >> tones
> >>
> >>
> >>
> >> ; must be defined in the [telemetry]
> stanza
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; LINK SETTINGS - values in seconds
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ;nolocallinkct=0
> >>
> >>
> >>
> >> ; Send unlinkedct instead of linkedct if
> >>
> >>
> >>
> >> ; another local node is connected to this
> >>
> >>
> >>
> >> ; node (hosted on the same server).
> >>
> >>
> >>
> >> ;lnkactenable=0
> >>
> >>
> >>
> >> ; The link activity timer may be used to
> >>
> >> reset
> >>
> >>
> >>
> >> ; a link configuration back to a default
> >>
> >>
> >>
> >> ; configuration if a user changes how the
> >>
> >> node
> >>
> >>
> >>
> >> ; is linked. This helps in situations
> >>
> >> where the
> >>
> >>
> >>
> >> ; user forgets to reset the system to the
> >>
> >> default
> >>
> >>
> >>
> >> ; values, or drives out of range.
> >>
> >>
> >>
> >> ;lnkacttime=1800
> >>
> >>
> >>
> >> ; This sets the amount of time to wait
> >>
> >> before
> >>
> >>
> >>
> >> ; executing the inactivity macro. Set to
> a
> >>
> >> value
> >>
> >>
> >>
> >> ; between 180 and 2000000 seconds.
> >>
> >>
> >>
> >> ;lnkactmacro=*52
> >>
> >>
> >>
> >> ; This is the function to execute when
> the
> >>
> >> activity
> >>
> >>
> >>
> >> ; timer expires. This can either be a
> >>
> >> function or
> >>
> >>
> >>
> >> ; another macro defined in the [macros]
> >>
> >> stanza.
> >>
> >>
> >>
> >> ;lnkacttimerwarn=30seconds
> >>
> >>
> >>
> >> ; For a 30 second warning message, set
> >>
> >> this to the
> >>
> >>
> >>
> >> ; path of a ulaw or pcm sound file to
> play
> >>
> >> locally
> >>
> >>
> >>
> >> ; when there is 30 seconds left on the
> >>
> >> activity timer.
> >>
> >>
> >>
> >> ; Defaults to /var/lib/asterisk/sounds
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; REMOTE SETTINGS - values in seconds
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ;remote_inact_timeout=1800
> >>
> >>
> >>
> >> ; Specifies the amount of time without
> >>
> >> keying
> >>
> >>
> >>
> >> ; from the link. Set to 0 to disable
> >>
> >> timeout.
> >>
> >>
> >>
> >> ;remote_timeout=3600
> >>
> >>
> >>
> >> ; Specifies the amount of time without
> >>
> >> keying from
> >>
> >>
> >>
> >> ; the link. Set to 0 to disable timeout.
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; LONG TONE ZERO DTMF
> >>
> >>
> >>
> >> ; LiTZ is a simple method to indicate to
> >>
> >> others on
> >>
> >>
> >>
> >> ; an amateur VHF / UHF FM radio frequency
> >>
> >> that you
> >>
> >>
> >>
> >> ; have an immediate need to communicate
> >>
> >> with someone,
> >>
> >>
> >>
> >> ; anyone, regarding a priority situation
> >>
> >> or condition.
> >>
> >>
> >>
> >> ; This command can call any DTMF function
> >>
> >> which could
> >>
> >>
> >>
> >> ; then call a script or program. It does
> >>
> >> not have to
> >>
> >>
> >>
> >> ; use the autopatch.
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ;litzcmd=*6911
> >>
> >>
> >>
> >> ; Command sequnce -- Call 911 on
> autopatch
> >>
> >>
> >>
> >> ;litztime=3000
> >>
> >>
> >>
> >> ; time required to hold down DTMF,
> >>
> >> defaults to 3000 ms
> >>
> >>
> >>
> >> ;litzchar=0
> >>
> >>
> >>
> >> ; DTMF character to activate LITZ,
> defauls
> >>
> >> to 0
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; MISC. SETTINGS
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> parrot=0 ; One time parrot modr with DTMF A9
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ;connpgm=yourconnectprogram
> >>
> >>
> >>
> >> ; Program or script to run at connection
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ;connpgm=/usr/local/sbin/supermon/smlogger 1 ; use this line for
> Supermon
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ;discpgm=yourdisconnectprogram
> >>
> >>
> >>
> >> ; Program or script to run at
> disconnection
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ;discpgm=/usr/local/sbin/supermon/smlogger 0 ; use this line for
> Supermon
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> nounkeyct=0
> >>
> >>
> >>
> >> ; Disable courtest tones (=1)
> >>
> >>
> >>
> >> holdofftelem=1
> >>
> >>
> >>
> >> ; Do not make announcements over user
> voice
> >>
> >>
> >>
> >> telemdefault=2
> >>
> >>
> >>
> >> ; 0= voice telemetry off, 1= on,
> >>
> >>
> >>
> >> ; 2= Only your telemetry actions
> >>
> >>
> >>
> >> ; then mutes in 1 minute
> >>
> >>
> >>
> >> beaconing=0
> >>
> >>
> >>
> >> ; When set to 1 will send the repeater ID
> >>
> >> at
> >>
> >>
> >>
> >> ; the idtime interval regardless of
> whether
> >>
> >>
> >>
> >> ; there was repeater activity or not.
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ;funcchar = *
> >>
> >>
> >>
> >> ; function lead-in character (defaults to
> >>
> >> '*')
> >>
> >>
> >>
> >> ;endchar = #
> >>
> >>
> >>
> >> ; command mode end character (defaults to
> >>
> >> '#')
> >>
> >>
> >>
> >> ;nobusyout=yes
> >>
> >>
> >>
> >> ; (optional) Do not busy-out
> reverse-patch
> >>
> >> when
> >>
> >>
> >>
> >> ; normal patch in use
> >>
> >>
> >>
> >> ;notelemtx = yes
> >>
> >>
> >>
> >> ; telemetry output does not make main
> >>
> >>
> >>
> >> ; system transmit (optional)
> >>
> >>
> >>
> >> ;propagate_dtmf = yes
> >>
> >>
> >>
> >> ; DTMF sent to system from link gets
> >>
> >>
> >>
> >> ; repeated onto main system output
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ;propagate_phonedtmf = yes
> >>
> >>
> >>
> >> ; DTMF sent to system from phone gets
> >>
> >>
> >>
> >> ; repeated into main system output and
> >>
> >>
> >>
> >> ; link outputs (optional)
> >>
> >>
> >>
> >> ;linktolink = yes
> >>
> >>
> >>
> >> ; disables forcing physical half-duplex
> >>
> >>
> >>
> >> ; operation of main repeater while
> >>
> >>
> >>
> >> ; still keeping half-duplex semantics
> >>
> >>
> >>
> >> ;inxlat = #456,#457,0123456789ABCD
> >>
> >>
> >>
> >> ; translate digit strings inbound,
> >>
> >>
> >>
> >> ; in this case intrepret #456 as star,
> >>
> >>
> >>
> >> ; #457 as pound, and pass all the other
> >>
> >>
> >>
> >> ; chars listed in arg3 (optional)
> >>
> >>
> >>
> >> ;outxlat = *7,*0,0123456789#ABCD
> >>
> >>
> >>
> >> ; translate digit string outbound,
> >>
> >>
> >>
> >> ; in this case *7 generates star, *0
> >>
> >>
> >>
> >> ; generates pound, and all the other
> >>
> >>
> >>
> >> ; digits pass along
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ;extnodes = extnodes-different
> >>
> >>
> >>
> >> ; section in extnodefile containing
> >>
> >>
> >>
> >> ; dynamic node information (optional)
> >>
> >>
> >>
> >> ;extnodefile = different-file
> >>
> >>
> >>
> >> ; file containing dynamic node
> >>
> >>
> >>
> >> ; info (optional)
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ;archivedir = some-directory
> >>
> >>
> >>
> >> ; defines and enables activity recording
> >>
> >>
> >>
> >> ; into specified directory (optional)
> >>
> >>
> >>
> >> ;archiveaudio=0
> >>
> >>
> >>
> >> ; Disable saving .wav files when
> >>
> >>
> >>
> >> ; archiving. Use with caution on SDcards
> >>
> >>
> >>
> >> ; This write a lot of data.
> >>
> >>
> >>
> >> ;archivetype=gsm
> >>
> >>
> >>
> >> ; Allows the selection of gsm/wav or
> >>
> >>
> >>
> >> ; pcm/ulaw for archiving audio files
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ;startup_macro = *7
> >>
> >>
> >>
> >> ; Macro to run at startup (optional)
> >>
> >>
> >>
> >> ;startup_macro_delay=10
> >>
> >>
> >>
> >> ; Time in seconds to wait before
> executing
> >>
> >>
> >>
> >> ; the startup macro
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; TAIL MESSAGE
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; The tailmessagetime,tailsquashedtime, and tailmessages need to be set
> >>
> >>
> >>
> >> ; to support tail messages. They can be omitted otherwise.
> >>
> >>
> >>
> >> ;
> >>
> >>
> >>
> >> ;tailmessagetime=1800000
> >>
> >>
> >>
> >> ; Play a tail message every 5 mins
> >>
> >>
> >>
> >> ;tailsquashedtime=120000
> >>
> >>
> >>
> >> ; If squashed by another user,
> >>
> >>
> >>
> >> ; try again after 30 seconds
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ;tailmessagelist=/etc/asterisk/local/some_file
> >>
> >>
> >>
> >> ;list of messages to be played for tail
> >>
> >> message
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; *** STATUS REPORTING ***
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; Uncomment the following two statpost lines to report the
> >>
> >>
> >>
> >> ; status of your node to stats.allstarlink.org <
> >> http://stats.allstarlink.org>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> statpost_program=/usr/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null
> >>
> >>
> >>
> >> statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; END OF SECOND NODE
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; MORSE CODE PARAMETERS
> >>
> >>
> >>
> >> ;
> >>
> >>
> >>
> >> [morse46663]
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> speed=20
> >>
> >>
> >>
> >> frequency=800
> >>
> >>
> >>
> >> amplitude=4096
> >>
> >>
> >>
> >> idfrequency=750
> >>
> >>
> >>
> >> idamplitude=1024
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; CONTROL STATES
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> [controlstates]
> >>
> >>
> >>
> >> ;statenum = copcmd,[copcmd]...
> >>
> >>
> >>
> >> 0 = rptena,lnkena,apena,totena,ufena,noicd ; Normal operation
> >>
> >>
> >>
> >> 1 = rptena,lnkdis,apdis,totena,ufdis,noice ; Repeater only operation
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; SCHEDULES
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> [schedule46663]
> >>
> >>
> >>
> >> ;dtmf_function = minute hour dayofmonth month dayofweek ; ala cron,
> >>
> >> star is implied
> >>
> >>
> >>
> >> ;1=00 * * * * ;run macro 1 on the hour
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; EVENTS
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> [events46663]
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; Commands for FOB COS indicator when available
> >>
> >>
> >>
> >> ; For this to work you must also add - gpio4 = out,0 - to simpleusb.conf
> >>
> >>
> >>
> >> ; Uncomment (remove ;) on next two lines to activate
> >>
> >>
> >>
> >> ;cop,62,GPIO4:1 = c|t|RPT_RXKEYED
> >>
> >>
> >>
> >> ;cop,62,GPIO4:0 = c|f|RPT_RXKEYED
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> [events46664]
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; FUNCTIONS
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> [functions46663]
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; disconnect link = *1<node>
> >>
> >>
> >>
> >> 1=ilink,1
> >>
> >>
> >>
> >> ; monitor link = *2<node>
> >>
> >>
> >>
> >> 2=ilink,2
> >>
> >>
> >>
> >> ; connect link transceive = *3<node>
> >>
> >>
> >>
> >> 3=ilink,3
> >>
> >>
> >>
> >> ; remote command = *4<node>
> >>
> >>
> >>
> >> 4=ilink,4
> >>
> >>
> >>
> >> ; execute macro = *5<macro#>
> >>
> >>
> >>
> >> 5=macro,1
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; system status
> >>
> >>
> >>
> >> 70=ilink,5
> >>
> >>
> >>
> >> ; disconnect permanently connected link = *71<node>
> >>
> >>
> >>
> >> 71=ilink,11
> >>
> >>
> >>
> >> ; connect link permanent monitor = *72<node>
> >>
> >>
> >>
> >> 72=ilink,12
> >>
> >>
> >>
> >> ; connect link permanent transceive = *73<node>
> >>
> >>
> >>
> >> 73=ilink,13
> >>
> >>
> >>
> >> ; play full system status
> >>
> >>
> >>
> >> 75=ilink,15
> >>
> >>
> >>
> >> ; disconnect all links
> >>
> >>
> >>
> >> 76=ilink,6
> >>
> >>
> >>
> >> ; reconnect previously disconnected links
> >>
> >>
> >>
> >> 77=ilink,16
> >>
> >>
> >>
> >> ; permanently monitor link – local Monitor only
> >>
> >>
> >>
> >> 78=ilink,18
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> 80=status,11 ; ID (local)
> >>
> >>
> >>
> >> ;81=status,12 ; Time of Day (local) old method
> >>
> >>
> >>
> >> ;Say 12 hour time on node 1
> >>
> >>
> >>
> >> ; Add local ZIP before node for weather also
> >>
> >>
> >>
> >> 81=cmd,/usr/local/sbin/saytime.pl <http://saytime.pl> 46663
> >>
> >>
> >>
> >> ; Say 24 hour time on node 1
> >>
> >>
> >>
> >> ; Add local ZIP before node for weather also
> >>
> >>
> >>
> >> 82=cmd,/usr/local/sbin/say24time.pl <http://say24time.pl> 79720 46663
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> 880=cmd,/usr/local/bin/AUTOSKY/AutoSky.OFF
> >>
> >>
> >>
> >> 881=cmd,/usr/local/bin/AUTOSKY/AutoSky.ON
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; Autopatch must be configured to work
> >>
> >>
> >>
> >> ; Autopatch up
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> 61=autopatchup,context=radio,noct=1,farenddisconnect=1,dialtime=20000,quiet=1
> >>
> >>
> >>
> >> ; Autopatch down
> >>
> >>
> >>
> >> 0=autopatchdn
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; Example Play a Node announcement
> >>
> >>
> >>
> >> ; Audio file must be Allstar compliant
> >>
> >>
> >>
> >> ;920=localplay,/etc/asterisk/local/some-file
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ;989=cop,4
> >>
> >>
> >>
> >> 980=status,3
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; News Script Functions
> >>
> >>
> >>
> >> 976=cmd,/etc/asterisk/local/playnews/playnews-0.11 ARN now 46663 G &>
> >>
> >> /dev/null 2>&1 ;Newsline *976
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> 99=cop,6 ; PPT on, # = release
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; Functions to call utility scripts
> >>
> >>
> >>
> >> ; Some of these are commented out.
> >>
> >>
> >>
> >> ; For use Remove ';' and change function
> >>
> >>
> >>
> >> ; command and node to your choice
> >>
> >>
> >>
> >> ; Note that halting the system remotely would require
> >>
> >>
> >>
> >> ; a power cycle to recover, use with caution!
> >>
> >>
> >>
> >> ;
> >>
> >>
> >>
> >> A1=cmd,/usr/local/sbin/sayip.sh 46663 ; Say local IP to radio
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> A3=cmd,/usr/local/sbin/saypublicip.sh 46663 ; Say Public IP to radio
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> A5=cmd,/usr/local/sbin/sayreg.sh ; Say Registration
> status
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; Say DNS node lookup
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> A7=autopatchup,context=saydns,noct=1,farenddisconnect=1,dialtime=15000,quiet=1
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> A9=cop,55 ; One time parrot
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ;B1=cmd,/usr/local/sbin/halt.sh 46663 ; Halt the system (linux total
> >>
> >> shutdown)
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ;B3=cmd,/usr/local/sbin/reboot.sh 46663 ; Reboot the system
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> B6=cmd,/usr/local/sbin/astres.sh ; Restart Asterisk
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; Update hamvoip with
> >>
> >> voice feedback
> >>
> >>
> >>
> >> ;C2=cmd,/usr/local/sbin/say-hamvoip-sys-update.sh
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; MACROS
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; Place command macros here
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> [macro46663]
> >>
> >>
> >>
> >> ;Macro number = command string (each command separated by space) -end
> with
> >>
> >> HASH
> >>
> >>
> >>
> >> 1=*81 *80# ; play time and voice ID
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; TELEMETRY COURTESY TONE DEFINITIONS
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> [telemetry46663]
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ct1=|t(350,0,100,2048)(500,0,100,2048)(660,0,100,2048)
> >>
> >>
> >>
> >> ct2=|t(660,880,150,2048)
> >>
> >>
> >>
> >> ct3=|t(440,0,150,4096)
> >>
> >>
> >>
> >> ct4=|t(550,0,150,2048)
> >>
> >>
> >>
> >> ct5=|t(660,0,150,2048)
> >>
> >>
> >>
> >> ct6=|t(880,0,150,2048)
> >>
> >>
> >>
> >> ct7=|t(660,440,150,2048)
> >>
> >>
> >>
> >> ct8=|t(700,1100,150,2048) ; 2048 amplitude
> >>
> >>
> >>
> >> remotetx=|t(1633,0,50,3000)(0,0,80,0)(1209,0,50,3000);
> >>
> >>
> >>
> >> remotemon=|t(1209,0,50,2048)
> >>
> >>
> >>
> >> cmdmode=|t(900,903,200,2048)
> >>
> >>
> >>
> >> functcomplete=|t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048)
> >>
> >>
> >>
> >> patchup=rpt/callproceeding
> >>
> >>
> >>
> >> patchdown=rpt/callterminated
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; WAIT TIMES
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ;
> >>
> >>
> >>
> >> ; This section allows wait times for telemetry events to be adjusted
> >>
> >>
> >>
> >> ; A section for wait times can be defined for every repeater (node)
> >>
> >>
> >>
> >> ;
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> [wait-times46663]
> >>
> >>
> >>
> >> telemwait=600
> >>
> >>
> >>
> >> idwait=600
> >>
> >>
> >>
> >> unkeywait=800
> >>
> >>
> >>
> >> calltermwait=2000
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; LOCAL NODE ROUTING
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ; Define local nodes
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> [nodes]
> >>
> >>
> >>
> >> ; Note, if you are using automatic updates for allstar link nodes,
> >>
> >>
> >>
> >> ; no allstar link nodes should be defined here. Only place a definition
> >>
> >>
> >>
> >> ; for your local (within your LAN) nodes, and private (off of allstar
> >>
> >>
> >>
> >> ; link) nodes here.
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> 46663 = radio at 127.0.0.1 <mailto:radio at 127.0.0.1> /46663,NONE
> >>
> >>
> >>
> >> 46664 = radio at 127.0.0.1 <mailto:radio at 127.0.0.1> /46664,NONE
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> connpgm=/usr/local/sbin/supermon/smlogger 1
> >>
> >>
> >>
> >> discpgm=/usr/local/sbin/supermon/smlogger 0
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> #includeifexists custom/rpt.conf
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> _______________________________________________
> >>
> >>
> >>
> >> ARM-allstar mailing list
> >>
> >> ARM-allstar at hamvoip.org <mailto:ARM-allstar at hamvoip.org>
> >>
> >> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>
> >>
> >>
> >> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >>
> >> _______________________________________________
> >>
> >> ARM-allstar mailing list
> >> ARM-allstar at hamvoip.org <mailto:ARM-allstar at hamvoip.org>
> >> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>
> >> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >>
> >> _______________________________________________
> >>
> >> ARM-allstar mailing list
> >> ARM-allstar at hamvoip.org
> >> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>
> >> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> >
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>
More information about the ARM-allstar
mailing list