[arm-allstar] Play ARN out Echolink connections
Lloyd Duck
lduck at me.com
Sun Apr 21 21:42:31 EDT 2019
Doug,
That is not correct, I do have playnews audio out the repeater and out to any allstar node connected.
Only place the audio is not going is out echolink. That’s why I’m thinking it’s just a simple setting that I’ve missed somewhere. It’s driving me a little nuts, I’ve looked over the conf files till it’s all looking the same now.
rpt.conf, echolink.conf and simpleusb.conf, is there another one I should be looking at?
Lloyd Duck, W5LND
On Apr 21, 2019, at 8:33 PM, Doug Crompton <wa3dsp at gmail.com> wrote:
LLoyd,
So you are saying you have no playnews audio anywhere? Does it play at all? On Allstar when connected to another node?
73 Doug
WA3DSP
http://www.crompton.com/hamradio
> On Sun, Apr 21, 2019 at 6:45 PM Lloyd Duck <lduck at me.com> wrote:
> Doug,
>
> I have the primary node set to duplex=1 and this is the node I’m able to get echolink to work on. I’m trying to do one step at a time. Audio comes out echolink no problem, just no audio from playing ARN. Once I get that to work I was wanting to move echolink to my second node.
>
>
>
> Lloyd Duck, W5LND
>
> On Apr 21, 2019, at 4:37 PM, Doug Crompton via ARM-allstar <arm-allstar at hamvoip.org> wrote:
>
> LLoyd,
>
> The errors are basically meaningless and a collection over time. I
> think we went through this before but I forget the exact details. If you
> have a main node connected to a second node strictly for Echolink and they
> are connected all audio from the main node will go to the connected node.
> The exception is if you have the main node in duplex 0. In that case as I
> remember the global playback on that node will NOT go to the connected
> nodes. It will however play localplay on the node it is being played on to
> a radio or iaxrpt connection to that node if they exist. If you have
> anything in duplex=0, I would suspect that is the problem.
>
> If you connect via allstar (iaxrpt or whatever) to the node that Echolink
> is running on and you hear the playback audio then it has to also be going
> out over Echolink connections on that same node.
>
> I have this identical setup here with a hub and a second strictly Echolink
> node. I play ARN and ARRL news weekly. Neither the main hub node or the
> Echolink node are in duplex=0. If I were to put the hub in duplex=0 the
> audio would go no where. I know that because I tried at one time duplex=0
> thinking why play telemetry stuff on a node that has no radio and found out
> the hard way you can't do that.l
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
>
> On Sun, Apr 21, 2019 at 2:27 PM "Lloyd Duck via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
>> I’m still not able to play Newsline out the Echolink connections, it plays
>> just fine out the repeater and the allstar connected nodes.
>>
>>
>>
>> I started all over and setup my node from scratch to make sure I hadn’t
>> disable it myself. I believe I’m just missing something.
>>
>>
>>
>> Here is a copy of my rpt.conf, I’m using the G for globe in the script.
>>
>>
>>
>> /etc/asterisk/local/playnews/playnews-0.11 ARN now 46663 G &> /dev/null 2>&
>>
>>
>>
>>
>>
>> Also I wanted to setup Echolink on my second node by using the
>> dahdi/pseudo so I can disconnect it from allstar network if needed.
>>
>>
>>
>> When I enter the 46664 for that node number in Echolink.conf I’m not able
>> to connect using my Echolink app. The phone is on a different network.
>>
>> It works fine if I use 46663 node number.
>>
>>
>>
>> ; WARNING - THIS FILE WAS AUTOMATICALLY CONFIGURED FROM A
>>
>> ; TEMPLATE FILE IN /usr/local/etc/asterisk_tpl BY THE
>>
>> ; NODE-CONFIG.SH SCRIPT.
>>
>> ;
>>
>> ; EACH TIME THIS SCRIPT IS RUN, THIS FILE WILL BE OVERWRITTEN.
>>
>> ; IF YOU CHANGE ANYTHING IN THIS FILE AND RUN THE NODE-CONFIG.SH
>>
>> ; SCRIPT, IT WILL BE LOST.
>>
>> ;
>>
>> ; IF YOU INTEND TO USE THE NODE-CONFIG.SH SCRIPT, THEN YOU SHOULD
>>
>> ; MAKE MODIFICATIONS TO THE ACTUAL TEMPLATE FILES LOCATED IN
>>
>> ; /usr/local/etc/asterisk_tpl directory.
>>
>> ;
>>
>> ; HAMVOIP Radio Repeater configuration file (for use with app_rpt)
>>
>>
>>
>> ; This file is shown with two local nodes. The first node is
>>
>> ; assigned during the setup process. If you later want to change
>>
>> ; the node number use your editor to wholsale change the current
>>
>> ; node number to the new number. Also see the important note below.
>>
>> ;
>>
>> ; The nano editor does this nicely using the 'CNTRL \' command.
>>
>> ;
>>
>> ; Likewise do the same for node 46664 if you are using a second node.
>>
>> ; Node 46664 is defined as a pseudo node but could be setup as a second
>>
>> ; simpleusb node.
>>
>> ;
>>
>> ; This file defaults to a simplex node (duplex=1)
>>
>> ;
>>
>> ; Lines with a ';' first character in this file are comments and
>>
>> ; are NOT executed. Values shown are typically defaults meaning
>>
>> ; if the command is commented out the value shown would be used.
>>
>>
>>
>> ; IMPORTANT NOTE - when changing node 46664 to a second node or
>>
>> ; adding a node the context mapping section and contexts below
>>
>> ; the last node stanza should reflect the FIRST node number at
>>
>> ; the end of their name unless you define separate stanza
>>
>> ; definitions for each node.
>>
>>
>>
>> ; Updated 1/2019 to include additional features
>>
>> ; Before attempting to add features ensure they
>>
>> ; are not already installed in this file.
>>
>>
>>
>> ; THIS IS AN IMPORTANT FILE! EDIT CAREFULLY AND
>>
>> ; MAKE A BACKUP FIRST!
>>
>>
>>
>> ; The first node definition
>>
>>
>>
>> [46663] ; Change this to your assigned node number
>>
>>
>>
>> ; CHANNEL DRIVER SETTINGS
>>
>> ; Define a channel driver to use and which
>>
>> ; interface within that channel driver
>>
>> ; To define a radioless node use the
>>
>> ; psuedo channel driver -
>> rxchannel=dahdi/pseudo
>>
>> ;rxchannel=Radio/usb46663
>>
>> ; Example usbradio channel driver
>>
>> rxchannel=SimpleUSB/usb
>>
>> ; Example simpleusb channel driver
>>
>> ;rxchannel=dahdi/pseudo
>>
>> ; Example pseudo channel driver
>>
>> ;rxchannel=iopipe/stanza1
>>
>> ; Future hamvoip IOpipe channel driver
>>
>> ; stanza1 rename to actual stanza name in
>> iopipe.conf file
>>
>> ;txchannel=
>>
>> ; The txchannel allows separate sound
>> cards for the
>>
>> ; receive and transmit audio paths. This
>> is seldom used
>>
>> ; but shown here to make the user aware of
>> its existence.
>>
>> ; It would take the same parameters as
>> rxchannel.
>>
>>
>>
>> ; NODE LOOKUP METHODS
>>
>>
>>
>> ; There are three choices for the way to
>> lookup
>>
>> ; nodes. Being able to lookup nodes and
>> mapping
>>
>> ; to an IP address and port is a
>> requirement
>>
>> ; for proper operation of Allstar.
>>
>>
>>
>> ; NOTE - when using DNS lookup on all
>> nodes on
>>
>> ; a server the filelookup_onoff.sh script
>> should
>>
>> ; be used to turn off redundant flat file
>> lookups.
>>
>> ; DNS lookup is the default.
>>
>>
>>
>> ; node_lookup_method=dns (Default)
>>
>> ; Uses hamvoip DNS lookup
>>
>>
>>
>> ; node_lookup_method=file
>>
>> ; Uses Allstar flat file lookup
>>
>> ; Deprecated in hamvoip v1.5
>>
>>
>>
>> ; node_lookup_method=local
>>
>> ; Uses local fixed routing defined in the
>>
>> ; [nodes] stanza below
>>
>> node_lookup_method=dns
>>
>>
>>
>>
>>
>> ; REPEATER/SIMPLEX NODE SETTINGS
>>
>> ; duplex=0 - Half duplex with no telemetry
>>
>> ; tones or hang time. Special Case: Full
>>
>> ; duplex if linktolink is set to yes.
>>
>> ; This mode is preferred when interfacing
>>
>> ; with an external multiport repeater
>> controller.
>>
>>
>>
>> ; duplex=1 - Half duplex with telemetry
>> tones
>>
>> ; and hang time. Does not repeat audio.
>>
>> ; This mode is preferred when interfacing a
>>
>> ; simplex node. This is the default mode.
>>
>>
>>
>> ; duplex=2 - Full Duplex with telemetry
>> tones
>>
>> ; and hang time. This mode is preferred
>> when
>>
>> ; interfacing a repeater.
>>
>>
>>
>> ; duplex=3 - Full Duplex with telemetry
>> tones
>>
>> ; and hang time, but no repeated audio.
>> Often
>>
>> ; used for radio-less nodes.
>>
>>
>>
>> ; duplex=4 - Full Duplex with telemetry
>> tones
>>
>> ; and hang time. Repeated audio only when
>> the
>>
>> ; autopatch is down.
>>
>> duplex=1
>>
>>
>>
>> ; CONTEXT MAPPING
>>
>>
>>
>> controlstates=controlstates46663
>>
>> ; Defines groups of control operator
>> commands
>>
>> ; to be executed all at once. Can be
>> combined
>>
>> ; with macros to allow changes to a nodes
>>
>> ; operating mode to be made quickly.
>>
>>
>>
>> scheduler=schedule46663
>>
>> ; Defines macros to be executed at a
>> specific
>>
>> ; time and date. Uses a cron-like syntax
>>
>>
>>
>> morse=morse46663
>>
>> ; Contains definitions for morse code
>> messages.
>>
>> ; One common morse stanza is shared across
>>
>> ; multiple nodes
>>
>>
>>
>> macro=macro46663
>>
>> ; Defines DTMF macro sequences
>>
>>
>>
>> functions=functions46663
>>
>> ; Defines DTMF function digit sequences. A
>>
>> ; function stanza has a reference to it
>> defined
>>
>> ; inside a node stanza. Multiple function
>> stanzas
>>
>> ; may be defined and used to provide
>> different
>>
>> ; function lists for different sources
>>
>> ; (radio.phone, and link)
>>
>>
>>
>> phone_functions=functions46663
>>
>> link_functions=functions46663
>>
>>
>>
>> telemetry=telemetry46663
>>
>> ; Contains definitions for telemetry tones
>>
>> ; (courtesy tones, roger beeps, etc). A
>> telemetry
>>
>> ; stanza has a reference to it defined
>> inside
>>
>> ; a node stanza.
>>
>>
>>
>> wait_times=wait-times46663
>>
>> ; Contains time delays used to time audio
>>
>> ; telemetry events
>>
>> events=events46663
>>
>> ; Allstar events
>>
>>
>>
>> ; ECHOLINK SETTINGS
>>
>> ; Echolink is a separate module.
>>
>> ; The Echolink.conf file must be
>>
>> ; configured for it to function
>>
>>
>>
>> erxgain=-3
>>
>> ; Echoline RX gain in dB
>>
>> etxgain=3
>>
>> ; Echolink TX gain in dB
>>
>> eannmode=2
>>
>> ; Echolink announcement mode
>>
>> ; Default: 1 = Say only node number on
>> echolink
>>
>> ; connects. 2 = say phonetic call sign
>> only on
>>
>> ; echolink connects. 3 = say phonetic call
>> sign
>>
>> ; and node number on echolink connects
>>
>>
>>
>> ; IRLP SETTINGS
>>
>> ; IRLP is a separate hamvoip package which
>> must
>>
>> ; be installed and configured for it to be
>>
>> ; functional.
>>
>>
>>
>> irxgain=-6
>>
>> ; IRLP receive gain adjustment
>>
>> itxgain=4
>>
>> ; IRLP transmit gain adjustment
>>
>> irlpann=0
>>
>> ; Default: 1 = Play irlp connect and
>> disconnect
>>
>> ; announcements
>>
>> ; 0 = Disable irlp connect and
>> disconnect
>>
>> ; announcements
>>
>>
>>
>>
>>
>> ; AUDIO LEVEL SETTINGS IN dB
>>
>>
>>
>> telemnomdb=0
>>
>> ; Overall reduction in telemetry level
>>
>> telemduckdb=-9
>>
>> ; Telemetry level reduction with signal
>>
>>
>>
>> ; NOTCH FILTER
>>
>>
>>
>> ;rxnotch=1000,20
>>
>> ; Apply a notch to filter the RX signal.
>> Values are:
>>
>> ; frequency, bandwidth. Up to ten filters
>> can be cascaded.
>>
>> ; Example of three cascaded filters at
>> 1000hz
>>
>> ; 20hz bandwidth:
>> rxnotch=1000,20,1000,20,1000,20
>>
>>
>>
>>
>>
>> ; DIAL PLAN SETTINGS
>>
>>
>>
>> context = radio
>>
>> callerid = Repeater <0000046663>
>>
>> ; This setting allows the autopatch on
>>
>> ; the node to be identified with a specific
>>
>> ; caller ID
>>
>> accountcode=RADIO
>>
>>
>>
>>
>>
>> ; ID SETTINGS
>>
>> ; ID recording files must have extension
>> gsm,ulaw,pcm,
>>
>> ; or wav. No file extension is used.
>>
>> ; All ID recording files should be sampled
>> at 8KH
>>
>>
>>
>> ;idrecording=/etc/asterisk/local/node-id
>>
>> ; Main ID voice
>>
>> ;idrecording=|iDE W5LND/L
>>
>> ; Main ID CW
>>
>> ;idtalkover=|iDE W5LND/L
>>
>> ; ID when signal present
>>
>>
>>
>> idrecording=/etc/asterisk/local/node-id
>>
>>
>>
>> ; TIME SETTINGS - milliseconds
>>
>> ; The default values for hangtime,
>> tx_timeout,
>>
>> ; and id interval time are ; 5 seconds
>> (5000 ms),
>>
>> ; 3 minutes (180000 ms), and 5 minutes
>> (300000 ms)
>>
>> ; respectively
>>
>>
>>
>> hangtime=100
>>
>> ; squelch tail hang time (in ms)
>>
>> althangtime=100
>>
>> ; This controls the length of the node
>> hang time
>>
>> ; when the alternate hang timer is
>> selected with
>>
>> ; a control operator function.
>>
>> tx_timeout=240000
>>
>> ; changed from totime V1.3
>>
>> idtime=600000
>>
>> ; ID every 10 minutes
>>
>> politeid=30000
>>
>> ; The politeid setting specified the
>> number of
>>
>> ; milliseconds prior to the end of the id
>> cycle
>>
>> ; where the controller will attempt to
>> play the
>>
>> ; ID in the tail when a user unkeys. If the
>>
>> ; controller does not get a chance to send
>> the
>>
>> ; ID in the tail, the ID will be played
>> over
>>
>> ; the top of the user transmission.
>>
>> rx_timeout=300000
>>
>> ; Timeout on hardware COS. Used to avoid
>> hangup
>>
>> ; of circuits with COS lockup.
>>
>> rx_cosflap=20
>>
>> ; Minimum COS Timeout reset period. Used to
>>
>> ; avoid resseting of rx_timeout with a
>> flapping
>>
>> ; squelch.
>>
>>
>>
>>
>>
>> ; COURTESY TONE MAPPING
>>
>>
>>
>> unlinkedct=ct1
>>
>> ; Sent when not connected to another node
>>
>> remotect=ct3
>>
>> ; Sent when remote base connected
>>
>>
>>
>> ; The linkunkeyct command can be used to
>>
>> ; customize the courtesy tone based on
>>
>> ; a node number. This is useful to identify
>>
>> ; input from a specific node. See the
>>
>> ; howto at hamvoip.org for details.
>>
>>
>>
>> linkunkeyct=ct8
>>
>> ; sent when a network user unkeys. This
>>
>> ; method uses the mapped tone for all
>> nodes.
>>
>>
>>
>> ;linkunkeyct=by_node_number,ct8
>>
>> ; Use this method to send a distinct
>> courtesy
>>
>> ; tone based on node number. If node
>> number is
>>
>> ; not defined use the default tone shown
>> here
>>
>> ; as ct8. Comment the linkunkeyct=ct8 above
>>
>> ; when using this method. See the howto on
>> this
>>
>> ; at hamvoip.org for additional
>> information.
>>
>>
>>
>> ;node40000=ct12
>>
>> ; Define node number to mapped tone for
>>
>> ; distinctive courtesy tone. Multiple nodes
>>
>> ; can be mapped to multiple mappings by
>> adding
>>
>> ; additional nodexxxxx=ctxx lines. ctxx
>> tones
>>
>> ; must be defined in the [telemetry] stanza
>>
>>
>>
>>
>>
>> ; LINK SETTINGS - values in seconds
>>
>>
>>
>> ;nolocallinkct=0
>>
>> ; Send unlinkedct instead of linkedct if
>>
>> ; another local node is connected to this
>>
>> ; node (hosted on the same server).
>>
>> ;lnkactenable=0
>>
>> ; The link activity timer may be used to
>> reset
>>
>> ; a link configuration back to a default
>>
>> ; configuration if a user changes how the
>> node
>>
>> ; is linked. This helps in situations
>> where the
>>
>> ; user forgets to reset the system to the
>> default
>>
>> ; values, or drives out of range.
>>
>> ;lnkacttime=1800
>>
>> ; This sets the amount of time to wait
>> before
>>
>> ; executing the inactivity macro. Set to a
>> value
>>
>> ; between 180 and 2000000 seconds.
>>
>> ;lnkactmacro=*52
>>
>> ; This is the function to execute when the
>> activity
>>
>> ; timer expires. This can either be a
>> function or
>>
>> ; another macro defined in the [macros]
>> stanza.
>>
>> ;lnkacttimerwarn=30seconds
>>
>> ; For a 30 second warning message, set
>> this to the
>>
>> ; path of a ulaw or pcm sound file to play
>> locally
>>
>> ; when there is 30 seconds left on the
>> activity timer.
>>
>> ; Defualts to /var/lib/asterisk/sounds
>>
>>
>>
>>
>>
>> ; REMOTE SETTINGS - values in seconds
>>
>>
>>
>> ;remote_inact_timeout=1800
>>
>> ; Specifies the amount of time without
>> keying
>>
>> ; from the link. Set to 0 to disable
>> timeout.
>>
>> ;remote_timeout=3600
>>
>> ; Specifies the amount of time without
>> keying from
>>
>> ; the link. Set to 0 to disable timeout.
>>
>>
>>
>>
>>
>> ; LONG TONE ZERO DTMF
>>
>> ; LiTZ is a simple method to indicate to
>> others on
>>
>> ; an amateur VHF / UHF FM radio frequency
>> that you
>>
>> ; have an immediate need to communicate
>> with someone,
>>
>> ; anyone, regarding a priority situation
>> or condition.
>>
>> ; This command can call any DTMF function
>> which could
>>
>> ; then call a script or program. It does
>> not have to
>>
>> ; use the autopatch.
>>
>>
>>
>> ;litzcmd=*6911
>>
>> ; Command sequnce -- Call 911 on autopatch
>>
>> ;litztime=3000
>>
>> ; time required to hold down DTMF,
>> defaults to 3000 ms
>>
>> ;litzchar=0
>>
>> ; DTMF character to activate LITZ, defauls
>> to 0
>>
>>
>>
>>
>>
>> ; MISC. SETTINGS
>>
>>
>>
>> parrot=0 ; One time parrot modr with DTMF A9
>>
>>
>>
>> ;connpgm=yourconnectprogram
>>
>> ; Program or script to run at connection
>>
>>
>>
>> ;connpgm=/usr/local/sbin/supermon/smlogger 1 ; use this line for Supermon
>>
>>
>>
>> ;discpgm=yourdisconnectprogram
>>
>> ; Program or script to run at disconnection
>>
>>
>>
>> ;discpgm=/usr/local/sbin/supermon/smlogger 0 ; use this line for Supermon
>>
>>
>>
>> nounkeyct=0
>>
>> ; Disable courtest tones (=1)
>>
>> holdofftelem=1
>>
>> ; Do not make announcements over user voice
>>
>> telemdefault=2
>>
>> ; 0= voice telemetry off, 1= on,
>>
>> ; 2= Only your telemetry actions
>>
>> ; then mutes in 1 minute
>>
>> beaconing=0
>>
>> ; When set to 1 will send the repeater ID
>> at
>>
>> ; the idtime interval regardless of whether
>>
>> ; there was repeater activity or not.
>>
>>
>>
>> ;funcchar = *
>>
>> ; function lead-in character (defaults to
>> '*')
>>
>> ;endchar = #
>>
>> ; command mode end character (defaults to
>> '#')
>>
>> ;nobusyout=yes
>>
>> ; (optional) Do not busy-out reverse-patch
>> when
>>
>> ; normal patch in use
>>
>> ;notelemtx = yes
>>
>> ; telemetry output does not make main
>>
>> ; system transmit (optional)
>>
>> ;propagate_dtmf = yes
>>
>> ; DTMF sent to system from link gets
>>
>> ; repeated onto main system output
>>
>>
>>
>> ;propagate_phonedtmf = yes
>>
>> ; DTMF sent to system from phone gets
>>
>> ; repeated into main system output and
>>
>> ; link outputs (optional)
>>
>> ;linktolink = yes
>>
>> ; disables forcing physical half-duplex
>>
>> ; operation of main repeater while
>>
>> ; still keeping half-duplex semantics
>>
>> ;inxlat = #456,#457,0123456789ABCD
>>
>> ; translate digit strings inbound,
>>
>> ; in this case intrepret #456 as star,
>>
>> ; #457 as pound, and pass all the other
>>
>> ; chars listed in arg3 (optional)
>>
>> ;outxlat = *7,*0,0123456789#ABCD
>>
>> ; translate digit string outbound,
>>
>> ; in this case *7 generates star, *0
>>
>> ; generates pound, and all the other
>>
>> ; digits pass along
>>
>>
>>
>> ;extnodes = extnodes-different
>>
>> ; section in extnodefile containing
>>
>> ; dynamic node information (optional)
>>
>> ;extnodefile = different-file
>>
>> ; file containing dynamic node
>>
>> ; info (optional)
>>
>>
>>
>> ;archivedir = some-directory
>>
>> ; defines and enables activity recording
>>
>> ; into specified directory (optional)
>>
>> ;archiveaudio=0
>>
>> ; Disable saving audio files when
>>
>> ; archiving. Use with caution on SDcards
>>
>> ; This write a lot of data.
>>
>> ;archivetype=gsm
>>
>> ; Allows the selection of gsm (.wav) or
>>
>> ; pcm (.ul) for archiving audio files
>>
>>
>>
>> ;startup_macro = *7
>>
>> ; Macro to run at startup (optional)
>>
>> ;startup_macro_delay=5
>>
>> ; Time in seconds to wait before executing
>>
>> ; the startup macro
>>
>>
>>
>> ; TAIL MESSAGE
>>
>>
>>
>> ; The tailmessagetime,tailsquashedtime, and tailmessages need to be set
>>
>> ; to support tail messages. They can be omitted otherwise.
>>
>> ;
>>
>> ;tailmessagetime=1800000
>>
>> ; Play a tail message every 5 mins
>>
>> ;tailsquashedtime=120000
>>
>> ; If squashed by another user,
>>
>> ; try again after 30 seconds
>>
>>
>>
>> ;tailmessagelist=/etc/asterisk/local/some_file
>>
>> ;list of messages to be played for tail
>> message
>>
>>
>>
>>
>>
>> ; *** STATUS REPORTING ***
>>
>>
>>
>> ; Uncomment the following two statpost lines to report the
>>
>> ; status of your node to stats.allstarlink.org
>>
>>
>>
>>
>> statpost_program=/usr/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null
>>
>> statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates
>>
>>
>>
>> ; END OF FIRST NODE
>>
>>
>>
>> ; BEGIN SECOND NODE
>>
>>
>>
>> ; Second node shown as a pseudo node
>>
>> ; This node can be edited to include a second public or private node
>>
>>
>>
>> [46664] ; Change this to your assigned node number
>>
>>
>>
>> ; CHANNEL DRIVER SETTINGS
>>
>> ; Define a channel driver to use and which
>>
>> ; interface within that channel driver
>>
>> ; To define a radioless node use the
>>
>> ; psuedo channel driver -
>> rxchannel=dahdi/pseudo
>>
>> ;rxchannel=Radio/usb46664
>>
>> ; Example usbradio channel driver
>>
>> ;rxchannel=SimpleUSB/usb2
>>
>> ; Example simpleusb channel driver
>>
>> ; Stanza for usb2 needs to be added to
>> simpleusb..conf
>>
>> rxchannel=dahdi/pseudo
>>
>> ; Example pseudo channel driver
>>
>> ;rxchannel=iopipe/stanza1
>>
>> ; Future hamvoip IOpipe channel driver
>>
>> ; stanza1 rename to actual stanza name in
>> iopipe.conf file
>>
>> ;txchannel=
>>
>> ; The txchannel allows separate sound
>> cards for the
>>
>> ; receive and transmit audio paths. This
>> is seldom used
>>
>> ; but shown here to make the user aware of
>> its existence.
>>
>> ; It would take the same parameters as
>> rxchannel.
>>
>>
>>
>> ; NODE LOOKUP METHODS
>>
>>
>>
>> ; There are three choices for the way to
>> lookup
>>
>> ; nodes. Being able to lookup nodes and
>> mapping
>>
>> ; to an IP address and port is a
>> requirement
>>
>> ; for proper operation of Allstar.
>>
>>
>>
>> ; NOTE - when using DNS lookup on all
>> nodes on
>>
>> ; a server the filelookup_onoff.sh script
>> should
>>
>> ; be used to turn off redundant flat file
>> lookups.
>>
>> ; DNS lookup is the default.
>>
>>
>>
>> ; node_lookup_method=dns (Default)
>>
>> ; Uses hamvoip DNS lookup
>>
>>
>>
>> ; node_lookup_method=file
>>
>> ; Uses Allstar flat file lookup
>>
>> ; Deprecated in hamvoip v1.5
>>
>>
>>
>> ; node_lookup_method=local
>>
>> ; Uses local fixed routing defined in the
>>
>> ; [nodes] stanza below
>>
>> node_lookup_method=dns
>>
>>
>>
>>
>>
>> ; REPEATER/SIMPLEX NODE SETTINGS
>>
>> ; duplex=0 - Half duplex with no telemetry
>>
>> ; tones or hang time. Special Case: Full
>>
>> ; duplex if linktolink is set to yes.
>>
>> ; This mode is preferred when interfacing
>>
>> ; with an external multiport repeater
>> controller.
>>
>>
>>
>> ; duplex=1 - Half duplex with telemetry
>> tones
>>
>> ; and hang time. Does not repeat audio.
>>
>> ; This mode is preferred when interfacing a
>>
>> ; simplex node. This is the default mode.
>>
>>
>>
>> ; duplex=2 - Full Duplex with telemetry
>> tones
>>
>> ; and hang time. This mode is preferred
>> when
>>
>> ; interfacing a repeater.
>>
>>
>>
>> ; duplex=3 - Full Duplex with telemetry
>> tones
>>
>> ; and hang time, but no repeated audio.
>> Often
>>
>> ; used for radio-less nodes
>>
>>
>>
>> ; duplex=4 - Full Duplex with telemetry
>> tones
>>
>> ; and hang time. Repeated audio only when
>> the
>>
>> ; autopatch is down.
>>
>> duplex=3
>>
>>
>>
>> ; CONTEXT MAPPING
>>
>>
>>
>> controlstates=controlstates
>>
>> ; Defines groups of control operator
>> commands
>>
>> ; to be executed all at once. Can be
>> combined
>>
>> ; with macros to allow changes to a nodes
>>
>> ; operating mode to be made quickly.
>>
>>
>>
>> scheduler=schedule46663
>>
>> ; Defines macros to be executed at a
>> specific
>>
>> ; time and date. Uses a cron-like syntax
>>
>>
>>
>> morse=morse46663
>>
>> ; Contains definitions for morse code
>> messages.
>>
>> ; One common morse stanza is shared across
>>
>> ; multiple nodes
>>
>>
>>
>> macro=macro46663
>>
>> ; Defines DTMF macro sequences
>>
>>
>>
>> functions=functions46663
>>
>> ; Defines DTMF function digit sequences. A
>>
>> ; function stanza has a reference to it
>> defined
>>
>> ; inside a node stanza. Multiple function
>> stanzas
>>
>> ; may be defined and used to provide
>> different
>>
>> ; function lists for different sources
>>
>> ; (radio.phone, and link)
>>
>>
>>
>> phone_functions=functions46663
>>
>> link_functions=functions46663
>>
>>
>>
>> telemetry=telemetry46663
>>
>> ; Contains definitions for telemetry tones
>>
>> ; (courtesy tones, roger beeps, etc). A
>> telemetry
>>
>> ; stanza has a reference to it defined
>> inside
>>
>> ; a node stanza.
>>
>>
>>
>> wait_times=wait-times46663
>>
>> ; Contains time delays used to time audio
>>
>> ; telemetry events
>>
>> events=events46663
>>
>> ; Allstar events
>>
>>
>>
>> ; ECHOLINK SETTINGS
>>
>> ; Echolink is a separate module.
>>
>> ; The Echolink.conf file must be
>>
>> ; configured for it to function
>>
>>
>>
>> erxgain=-3
>>
>> ; Echoline RX gain in dB
>>
>> etxgain=3
>>
>> ; Echolink TX gain in dB
>>
>> ;eannmode=1
>>
>> ; Echolink announcement mode
>>
>> ; Default: 1 = Say only node number on
>> echolink
>>
>> ; connects. 2 = say phonetic call sign
>> only on
>>
>> ; echolink connects. 3 = say phonetic call
>> sign
>>
>> ; and node number on echolink connects
>>
>>
>>
>> ; IRLP SETTINGS
>>
>> ; IRLP is a separate hamvoip package which
>> must
>>
>> ; be installed and configured for it to be
>>
>> ; functional.
>>
>>
>>
>> irxgain=-6
>>
>> ; IRLP receive gain adjustment
>>
>> itxgain=4
>>
>> ; IRLP transmit gain adjustment
>>
>> irlpann=0
>>
>> ; Default: 1 = Play irlp connect and
>> disconnect
>>
>> ; announcements
>>
>> ; 0 = Disable irlp connect and
>> disconnect
>>
>> ; announcements
>>
>>
>>
>>
>>
>> ; AUDIO LEVEL SETTINGS IN dB
>>
>>
>>
>> telemnomdb=0
>>
>> ; Overall reduction in telemetry level
>>
>> telemduckdb=-9
>>
>> ; Telemetry level reduction with signal
>>
>>
>>
>> ; NOTCH FILTER
>>
>>
>>
>> ;rxnotch=1000,20
>>
>> ; Apply a notch to filter the RX signal.
>> Values are:
>>
>> ; frequency, bandwidth. Up to ten filters
>> can be cascaded.
>>
>> ; Example of three cascaded filters at
>> 1000hz
>>
>> ; 20hz bandwidth:
>> rxnotch=1000,20,1000,20,1000,20
>>
>>
>>
>> ; DIAL PLAN SETTINGS
>>
>>
>>
>> context = radio
>>
>> callerid = Repeater <0000046663>
>>
>> ; This setting allows the autopatch on
>>
>> ; the node to be identified with a specific
>>
>> ; caller ID
>>
>> accountcode=RADIO
>>
>>
>>
>>
>>
>> ; ID SETTINGS
>>
>> ; ID recording files must have extension
>> gsm,ulaw,pcm,
>>
>> ; or wav. No file extension is used.
>>
>> ; All ID recording files should be sampled
>> at 8KH
>>
>>
>>
>> idrecording=/etc/asterisk/local/node-id
>>
>> ; Main ID voice
>>
>> ;idrecording=|iDE W5LND/L
>>
>> ; Main ID CW
>>
>> idtalkover=|iDE W5LND/L
>>
>> ; ID when signal present
>>
>>
>>
>>
>>
>> ; TIME SETTINGS - milliseconds
>>
>> ; The default values for hangtime,
>> tx_timeout,
>>
>> ; and id interval time are ; 5 seconds
>> (5000 ms),
>>
>> ; 3 minutes (180000 ms), and 5 minutes
>> (300000 ms)
>>
>> ; respectively
>>
>>
>>
>> hangtime=100
>>
>> ; squelch tail hang time (in ms)
>>
>> althangtime=100
>>
>> ; This controls the length of the node
>> hang time
>>
>> ; when the alternate hang timer is
>> selected with
>>
>> ; a control operator function.
>>
>> tx_timeout=240000
>>
>> ; changed from totime V1.3
>>
>> idtime=600000
>>
>> ; ID every 10 minutes
>>
>> politeid=30000
>>
>> ; The politeid setting specified the
>> number of
>>
>> ; milliseconds prior to the end of the id
>> cycle
>>
>> ; where the controller will attempt to
>> play the
>>
>> ; ID in the tail when a user unkeys. If the
>>
>> ; controller does not get a chance to send
>> the
>>
>> ; ID in the tail, the ID will be played
>> over
>>
>> ; the top of the user transmission.
>>
>> rx_timeout=300000
>>
>> ; Timeout on hardware COS. Used to avoid
>> hangup
>>
>> ; of circuits with COS lockup.
>>
>> rx_cosflap=20
>>
>> ; Minimum COS Timeout reset period. Used to
>>
>> ; avoid resseting of rx_timeout with a
>> flapping
>>
>> ; squelch.
>>
>>
>>
>>
>>
>> ; COURTESY TONE MAPPING
>>
>>
>>
>> unlinkedct=ct2
>>
>> ; Sent when not connected to another node
>>
>> remotect=ct3
>>
>> ; Sent when remote base connected
>>
>>
>>
>> linkunkeyct=ct8
>>
>> ; sent when a network user unkeys. This
>>
>> ; method uses the mapped tone for all
>> nodes.
>>
>>
>>
>> ;linkunkeyct=by_node_number,ct8
>>
>> ; Use this method to send a distinct
>> courtesy
>>
>> ; tone based on node number. If node
>> number is
>>
>> ; not defined use the default tone shown
>> here
>>
>> ; as ct8. Comment the linkunkeyct=ct8 above
>>
>> ; when using this method. See the howto on
>> this
>>
>> ; at hamvoip.org for additional
>> information.
>>
>>
>>
>> ;node40000=ct12
>>
>> ; Define node number to mapped tone for
>>
>> ; distinctive courtesy tone. Multiple nodes
>>
>> ; can be mapped to multiple mappings by
>> adding
>>
>> ; additional nodexxxxx=ctxx lines. ctxx
>> tones
>>
>> ; must be defined in the [telemetry] stanza
>>
>>
>>
>>
>>
>> ; LINK SETTINGS - values in seconds
>>
>>
>>
>> ;nolocallinkct=0
>>
>> ; Send unlinkedct instead of linkedct if
>>
>> ; another local node is connected to this
>>
>> ; node (hosted on the same server).
>>
>> ;lnkactenable=0
>>
>> ; The link activity timer may be used to
>> reset
>>
>> ; a link configuration back to a default
>>
>> ; configuration if a user changes how the
>> node
>>
>> ; is linked. This helps in situations
>> where the
>>
>> ; user forgets to reset the system to the
>> default
>>
>> ; values, or drives out of range.
>>
>> ;lnkacttime=1800
>>
>> ; This sets the amount of time to wait
>> before
>>
>> ; executing the inactivity macro. Set to a
>> value
>>
>> ; between 180 and 2000000 seconds.
>>
>> ;lnkactmacro=*52
>>
>> ; This is the function to execute when the
>> activity
>>
>> ; timer expires. This can either be a
>> function or
>>
>> ; another macro defined in the [macros]
>> stanza.
>>
>> ;lnkacttimerwarn=30seconds
>>
>> ; For a 30 second warning message, set
>> this to the
>>
>> ; path of a ulaw or pcm sound file to play
>> locally
>>
>> ; when there is 30 seconds left on the
>> activity timer.
>>
>> ; Defaults to /var/lib/asterisk/sounds
>>
>>
>>
>>
>>
>> ; REMOTE SETTINGS - values in seconds
>>
>>
>>
>> ;remote_inact_timeout=1800
>>
>> ; Specifies the amount of time without
>> keying
>>
>> ; from the link. Set to 0 to disable
>> timeout.
>>
>> ;remote_timeout=3600
>>
>> ; Specifies the amount of time without
>> keying from
>>
>> ; the link. Set to 0 to disable timeout.
>>
>>
>>
>>
>>
>> ; LONG TONE ZERO DTMF
>>
>> ; LiTZ is a simple method to indicate to
>> others on
>>
>> ; an amateur VHF / UHF FM radio frequency
>> that you
>>
>> ; have an immediate need to communicate
>> with someone,
>>
>> ; anyone, regarding a priority situation
>> or condition.
>>
>> ; This command can call any DTMF function
>> which could
>>
>> ; then call a script or program. It does
>> not have to
>>
>> ; use the autopatch.
>>
>>
>>
>> ;litzcmd=*6911
>>
>> ; Command sequnce -- Call 911 on autopatch
>>
>> ;litztime=3000
>>
>> ; time required to hold down DTMF,
>> defaults to 3000 ms
>>
>> ;litzchar=0
>>
>> ; DTMF character to activate LITZ, defauls
>> to 0
>>
>>
>>
>>
>>
>> ; MISC. SETTINGS
>>
>>
>>
>> parrot=0 ; One time parrot modr with DTMF A9
>>
>>
>>
>> ;connpgm=yourconnectprogram
>>
>> ; Program or script to run at connection
>>
>>
>>
>> ;connpgm=/usr/local/sbin/supermon/smlogger 1 ; use this line for Supermon
>>
>>
>>
>> ;discpgm=yourdisconnectprogram
>>
>> ; Program or script to run at disconnection
>>
>>
>>
>> ;discpgm=/usr/local/sbin/supermon/smlogger 0 ; use this line for Supermon
>>
>>
>>
>> nounkeyct=0
>>
>> ; Disable courtest tones (=1)
>>
>> holdofftelem=1
>>
>> ; Do not make announcements over user voice
>>
>> telemdefault=2
>>
>> ; 0= voice telemetry off, 1= on,
>>
>> ; 2= Only your telemetry actions
>>
>> ; then mutes in 1 minute
>>
>> beaconing=0
>>
>> ; When set to 1 will send the repeater ID
>> at
>>
>> ; the idtime interval regardless of whether
>>
>> ; there was repeater activity or not.
>>
>>
>>
>> ;funcchar = *
>>
>> ; function lead-in character (defaults to
>> '*')
>>
>> ;endchar = #
>>
>> ; command mode end character (defaults to
>> '#')
>>
>> ;nobusyout=yes
>>
>> ; (optional) Do not busy-out reverse-patch
>> when
>>
>> ; normal patch in use
>>
>> ;notelemtx = yes
>>
>> ; telemetry output does not make main
>>
>> ; system transmit (optional)
>>
>> ;propagate_dtmf = yes
>>
>> ; DTMF sent to system from link gets
>>
>> ; repeated onto main system output
>>
>>
>>
>> ;propagate_phonedtmf = yes
>>
>> ; DTMF sent to system from phone gets
>>
>> ; repeated into main system output and
>>
>> ; link outputs (optional)
>>
>> ;linktolink = yes
>>
>> ; disables forcing physical half-duplex
>>
>> ; operation of main repeater while
>>
>> ; still keeping half-duplex semantics
>>
>> ;inxlat = #456,#457,0123456789ABCD
>>
>> ; translate digit strings inbound,
>>
>> ; in this case intrepret #456 as star,
>>
>> ; #457 as pound, and pass all the other
>>
>> ; chars listed in arg3 (optional)
>>
>> ;outxlat = *7,*0,0123456789#ABCD
>>
>> ; translate digit string outbound,
>>
>> ; in this case *7 generates star, *0
>>
>> ; generates pound, and all the other
>>
>> ; digits pass along
>>
>>
>>
>> ;extnodes = extnodes-different
>>
>> ; section in extnodefile containing
>>
>> ; dynamic node information (optional)
>>
>> ;extnodefile = different-file
>>
>> ; file containing dynamic node
>>
>> ; info (optional)
>>
>>
>>
>> ;archivedir = some-directory
>>
>> ; defines and enables activity recording
>>
>> ; into specified directory (optional)
>>
>> ;archiveaudio=0
>>
>> ; Disable saving .wav files when
>>
>> ; archiving. Use with caution on SDcards
>>
>> ; This write a lot of data.
>>
>> ;archivetype=gsm
>>
>> ; Allows the selection of gsm/wav or
>>
>> ; pcm/ulaw for archiving audio files
>>
>>
>>
>> ;startup_macro = *7
>>
>> ; Macro to run at startup (optional)
>>
>> ;startup_macro_delay=10
>>
>> ; Time in seconds to wait before executing
>>
>> ; the startup macro
>>
>>
>>
>> ; TAIL MESSAGE
>>
>>
>>
>> ; The tailmessagetime,tailsquashedtime, and tailmessages need to be set
>>
>> ; to support tail messages. They can be omitted otherwise.
>>
>> ;
>>
>> ;tailmessagetime=1800000
>>
>> ; Play a tail message every 5 mins
>>
>> ;tailsquashedtime=120000
>>
>> ; If squashed by another user,
>>
>> ; try again after 30 seconds
>>
>>
>>
>> ;tailmessagelist=/etc/asterisk/local/some_file
>>
>> ;list of messages to be played for tail
>> message
>>
>>
>>
>>
>>
>> ; *** STATUS REPORTING ***
>>
>>
>>
>> ; Uncomment the following two statpost lines to report the
>>
>> ; status of your node to stats.allstarlink.org
>>
>>
>>
>>
>> statpost_program=/usr/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null
>>
>> statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates
>>
>>
>>
>> ; END OF SECOND NODE
>>
>>
>>
>>
>>
>> ; MORSE CODE PARAMETERS
>>
>> ;
>>
>> [morse46663]
>>
>>
>>
>> speed=20
>>
>> frequency=800
>>
>> amplitude=4096
>>
>> idfrequency=750
>>
>> idamplitude=1024
>>
>>
>>
>> ; CONTROL STATES
>>
>>
>>
>> [controlstates]
>>
>> ;statenum = copcmd,[copcmd]...
>>
>> 0 = rptena,lnkena,apena,totena,ufena,noicd ; Normal operation
>>
>> 1 = rptena,lnkdis,apdis,totena,ufdis,noice ; Repeater only operation
>>
>>
>>
>> ; SCHEDULES
>>
>>
>>
>> [schedule46663]
>>
>> ;dtmf_function = minute hour dayofmonth month dayofweek ; ala cron,
>> star is implied
>>
>> ;1=00 * * * * ;run macro 1 on the hour
>>
>>
>>
>>
>>
>> ; EVENTS
>>
>>
>>
>> [events46663]
>>
>>
>>
>> ; Commands for FOB COS indicator when available
>>
>> ; For this to work you must also add - gpio4 = out,0 - to simpleusb.conf
>>
>> ; Uncomment (remove ;) on next two lines to activate
>>
>> ;cop,62,GPIO4:1 = c|t|RPT_RXKEYED
>>
>> ;cop,62,GPIO4:0 = c|f|RPT_RXKEYED
>>
>>
>>
>> [events46664]
>>
>>
>>
>> ; FUNCTIONS
>>
>>
>>
>> [functions46663]
>>
>>
>>
>> ; disconnect link = *1<node>
>>
>> 1=ilink,1
>>
>> ; monitor link = *2<node>
>>
>> 2=ilink,2
>>
>> ; connect link transceive = *3<node>
>>
>> 3=ilink,3
>>
>> ; remote command = *4<node>
>>
>> 4=ilink,4
>>
>> ; execute macro = *5<macro#>
>>
>> 5=macro,1
>>
>>
>>
>> ; system status
>>
>> 70=ilink,5
>>
>> ; disconnect permanently connected link = *71<node>
>>
>> 71=ilink,11
>>
>> ; connect link permanent monitor = *72<node>
>>
>> 72=ilink,12
>>
>> ; connect link permanent transceive = *73<node>
>>
>> 73=ilink,13
>>
>> ; play full system status
>>
>> 75=ilink,15
>>
>> ; disconnect all links
>>
>> 76=ilink,6
>>
>> ; reconnect previously disconnected links
>>
>> 77=ilink,16
>>
>> ; permanently monitor link – local Monitor only
>>
>> 78=ilink,18
>>
>>
>>
>> 80=status,11 ; ID (local)
>>
>> ;81=status,12 ; Time of Day (local) old method
>>
>> ;Say 12 hour time on node 1
>>
>> ; Add local ZIP before node for weather also
>>
>> 81=cmd,/usr/local/sbin/saytime.pl 46663
>>
>> ; Say 24 hour time on node 1
>>
>> ; Add local ZIP before node for weather also
>>
>> 82=cmd,/usr/local/sbin/say24time.pl 79720 46663
>>
>>
>>
>> 880=cmd,/usr/local/bin/AUTOSKY/AutoSky.OFF
>>
>> 881=cmd,/usr/local/bin/AUTOSKY/AutoSky.ON
>>
>>
>>
>> ; Autopatch must be configured to work
>>
>> ; Autopatch up
>>
>>
>> 61=autopatchup,context=radio,noct=1,farenddisconnect=1,dialtime=20000,quiet=1
>>
>> ; Autopatch down
>>
>> 0=autopatchdn
>>
>>
>>
>> ; Example Play a Node announcement
>>
>> ; Audio file must be Allstar compliant
>>
>> ;920=localplay,/etc/asterisk/local/some-file
>>
>>
>>
>> ;989=cop,4
>>
>> 980=status,3
>>
>>
>>
>> ; News Script Functions
>>
>> 976=cmd,/etc/asterisk/local/playnews/playnews-0.11 ARN now 46663 G &>
>> /dev/null 2>&1 ;Newsline *976
>>
>>
>>
>> 99=cop,6 ; PPT on, # = release
>>
>>
>>
>> ; Functions to call utility scripts
>>
>> ; Some of these are commented out.
>>
>> ; For use Remove ';' and change function
>>
>> ; command and node to your choice
>>
>> ; Note that halting the system remotely would require
>>
>> ; a power cycle to recover, use with caution!
>>
>> ;
>>
>> A1=cmd,/usr/local/sbin/sayip.sh 46663 ; Say local IP to radio
>>
>>
>>
>> A3=cmd,/usr/local/sbin/saypublicip.sh 46663 ; Say Public IP to radio
>>
>>
>>
>> A5=cmd,/usr/local/sbin/sayreg.sh ; Say Registration status
>>
>>
>>
>> ; Say DNS node lookup
>>
>>
>> A7=autopatchup,context=saydns,noct=1,farenddisconnect=1,dialtime=15000,quiet=1
>>
>>
>>
>> A9=cop,55 ; One time parrot
>>
>>
>>
>> ;B1=cmd,/usr/local/sbin/halt.sh 46663 ; Halt the system (linux total
>> shutdown)
>>
>>
>>
>> ;B3=cmd,/usr/local/sbin/reboot.sh 46663 ; Reboot the system
>>
>>
>>
>> B6=cmd,/usr/local/sbin/astres.sh ; Restart Asterisk
>>
>>
>>
>> ; Update hamvoip with
>> voice feedback
>>
>> ;C2=cmd,/usr/local/sbin/say-hamvoip-sys-update.sh
>>
>>
>>
>>
>>
>> ; MACROS
>>
>>
>>
>> ; Place command macros here
>>
>>
>>
>> [macro46663]
>>
>> ;Macro number = command string (each command separated by space) -end with
>> HASH
>>
>> 1=*81 *80# ; play time and voice ID
>>
>>
>>
>>
>>
>> ; TELEMETRY COURTESY TONE DEFINITIONS
>>
>>
>>
>> [telemetry46663]
>>
>>
>>
>> ct1=|t(350,0,100,2048)(500,0,100,2048)(660,0,100,2048)
>>
>> ct2=|t(660,880,150,2048)
>>
>> ct3=|t(440,0,150,4096)
>>
>> ct4=|t(550,0,150,2048)
>>
>> ct5=|t(660,0,150,2048)
>>
>> ct6=|t(880,0,150,2048)
>>
>> ct7=|t(660,440,150,2048)
>>
>> ct8=|t(700,1100,150,2048) ; 2048 amplitude
>>
>> remotetx=|t(1633,0,50,3000)(0,0,80,0)(1209,0,50,3000);
>>
>> remotemon=|t(1209,0,50,2048)
>>
>> cmdmode=|t(900,903,200,2048)
>>
>> functcomplete=|t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048)
>>
>> patchup=rpt/callproceeding
>>
>> patchdown=rpt/callterminated
>>
>>
>>
>> ; WAIT TIMES
>>
>>
>>
>> ;
>>
>> ; This section allows wait times for telemetry events to be adjusted
>>
>> ; A section for wait times can be defined for every repeater (node)
>>
>> ;
>>
>>
>>
>> [wait-times46663]
>>
>> telemwait=600
>>
>> idwait=600
>>
>> unkeywait=800
>>
>> calltermwait=2000
>>
>>
>>
>> ; LOCAL NODE ROUTING
>>
>>
>>
>> ; Define local nodes
>>
>>
>>
>> [nodes]
>>
>> ; Note, if you are using automatic updates for allstar link nodes,
>>
>> ; no allstar link nodes should be defined here. Only place a definition
>>
>> ; for your local (within your LAN) nodes, and private (off of allstar
>>
>> ; link) nodes here.
>>
>>
>>
>> 46663 = radio at 127.0.0.1/46663,NONE
>>
>> 46664 = radio at 127.0.0.1/46664,NONE
>>
>>
>>
>> connpgm=/usr/local/sbin/supermon/smlogger 1
>>
>> discpgm=/usr/local/sbin/supermon/smlogger 0
>>
>>
>>
>> #includeifexists custom/rpt.conf
>>
>>
>>
>>
>>
>> _______________________________________________
>>
>> ARM-allstar mailing list
>> ARM-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
More information about the ARM-allstar
mailing list